conclusion research topics

How to Write a Conclusion for Research Papers (with Examples)

The conclusion of a research paper is a crucial section that plays a significant role in the overall impact and effectiveness of your research paper. However, this is also the section that typically receives less attention compared to the introduction and the body of the paper. The conclusion serves to provide a concise summary of the key findings, their significance, their implications, and a sense of closure to the study. Discussing how can the findings be applied in real-world scenarios or inform policy, practice, or decision-making is especially valuable to practitioners and policymakers. The research paper conclusion also provides researchers with clear insights and valuable information for their own work, which they can then build on and contribute to the advancement of knowledge in the field.

The research paper conclusion should explain the significance of your findings within the broader context of your field. It restates how your results contribute to the existing body of knowledge and whether they confirm or challenge existing theories or hypotheses. Also, by identifying unanswered questions or areas requiring further investigation, your awareness of the broader research landscape can be demonstrated.

Remember to tailor the research paper conclusion to the specific needs and interests of your intended audience, which may include researchers, practitioners, policymakers, or a combination of these.

Table of Contents

What is a conclusion in a research paper, summarizing conclusion, editorial conclusion, externalizing conclusion, importance of a good research paper conclusion, how to write a conclusion for your research paper, research paper conclusion examples.

• How to write a research paper conclusion with Paperpal? 

Frequently Asked Questions

A conclusion in a research paper is the final section where you summarize and wrap up your research, presenting the key findings and insights derived from your study. The research paper conclusion is not the place to introduce new information or data that was not discussed in the main body of the paper. When working on how to conclude a research paper, remember to stick to summarizing and interpreting existing content. The research paper conclusion serves the following purposes: 1

• Warn readers of the possible consequences of not attending to the problem.
• Recommend specific course(s) of action.
• Restate key ideas to drive home the ultimate point of your research paper.
• Provide a “take-home” message that you want the readers to remember about your study.

Types of conclusions for research papers

In research papers, the conclusion provides closure to the reader. The type of research paper conclusion you choose depends on the nature of your study, your goals, and your target audience. I provide you with three common types of conclusions:

A summarizing conclusion is the most common type of conclusion in research papers. It involves summarizing the main points, reiterating the research question, and restating the significance of the findings. This common type of research paper conclusion is used across different disciplines.

An editorial conclusion is less common but can be used in research papers that are focused on proposing or advocating for a particular viewpoint or policy. It involves presenting a strong editorial or opinion based on the research findings and offering recommendations or calls to action.

An externalizing conclusion is a type of conclusion that extends the research beyond the scope of the paper by suggesting potential future research directions or discussing the broader implications of the findings. This type of conclusion is often used in more theoretical or exploratory research papers.

Align your conclusion’s tone with the rest of your research paper. Start Writing with Paperpal Now!  

The conclusion in a research paper serves several important purposes:

• Offers Implications and Recommendations : Your research paper conclusion is an excellent place to discuss the broader implications of your research and suggest potential areas for further study. It’s also an opportunity to offer practical recommendations based on your findings.
• Provides Closure : A good research paper conclusion provides a sense of closure to your paper. It should leave the reader with a feeling that they have reached the end of a well-structured and thought-provoking research project.
• Leaves a Lasting Impression : Writing a well-crafted research paper conclusion leaves a lasting impression on your readers. It’s your final opportunity to leave them with a new idea, a call to action, or a memorable quote.

Writing a strong conclusion for your research paper is essential to leave a lasting impression on your readers. Here’s a step-by-step process to help you create and know what to put in the conclusion of a research paper: 2

• Research Statement : Begin your research paper conclusion by restating your research statement. This reminds the reader of the main point you’ve been trying to prove throughout your paper. Keep it concise and clear.
• Key Points : Summarize the main arguments and key points you’ve made in your paper. Avoid introducing new information in the research paper conclusion. Instead, provide a concise overview of what you’ve discussed in the body of your paper.
• Address the Research Questions : If your research paper is based on specific research questions or hypotheses, briefly address whether you’ve answered them or achieved your research goals. Discuss the significance of your findings in this context.
• Significance : Highlight the importance of your research and its relevance in the broader context. Explain why your findings matter and how they contribute to the existing knowledge in your field.
• Implications : Explore the practical or theoretical implications of your research. How might your findings impact future research, policy, or real-world applications? Consider the “so what?” question.
• Future Research : Offer suggestions for future research in your area. What questions or aspects remain unanswered or warrant further investigation? This shows that your work opens the door for future exploration.
• Closing Thought : Conclude your research paper conclusion with a thought-provoking or memorable statement. This can leave a lasting impression on your readers and wrap up your paper effectively. Avoid introducing new information or arguments here.
• Proofread and Revise : Carefully proofread your conclusion for grammar, spelling, and clarity. Ensure that your ideas flow smoothly and that your conclusion is coherent and well-structured.

Write your research paper conclusion 2x faster with Paperpal. Try it now!

Remember that a well-crafted research paper conclusion is a reflection of the strength of your research and your ability to communicate its significance effectively. It should leave a lasting impression on your readers and tie together all the threads of your paper. Now you know how to start the conclusion of a research paper and what elements to include to make it impactful, let’s look at a research paper conclusion sample.

How to write a research paper conclusion with Paperpal?

A research paper conclusion is not just a summary of your study, but a synthesis of the key findings that ties the research together and places it in a broader context. A research paper conclusion should be concise, typically around one paragraph in length. However, some complex topics may require a longer conclusion to ensure the reader is left with a clear understanding of the study’s significance. Paperpal, an AI writing assistant trusted by over 800,000 academics globally, can help you write a well-structured conclusion for your research paper. 

• Sign Up or Log In: Create a new Paperpal account or login with your details.  
• Navigate to Features : Once logged in, head over to the features’ side navigation pane. Click on Templates and you’ll find a suite of generative AI features to help you write better, faster.  
• Generate an outline: Under Templates, select ‘Outlines’. Choose ‘Research article’ as your document type.  
• Select your section: Since you’re focusing on the conclusion, select this section when prompted.  
• Choose your field of study: Identifying your field of study allows Paperpal to provide more targeted suggestions, ensuring the relevance of your conclusion to your specific area of research. 
• Provide a brief description of your study: Enter details about your research topic and findings. This information helps Paperpal generate a tailored outline that aligns with your paper’s content. 
• Generate the conclusion outline: After entering all necessary details, click on ‘generate’. Paperpal will then create a structured outline for your conclusion, to help you start writing and build upon the outline.  
• Write your conclusion: Use the generated outline to build your conclusion. The outline serves as a guide, ensuring you cover all critical aspects of a strong conclusion, from summarizing key findings to highlighting the research’s implications. 
• Refine and enhance: Paperpal’s ‘Make Academic’ feature can be particularly useful in the final stages. Select any paragraph of your conclusion and use this feature to elevate the academic tone, ensuring your writing is aligned to the academic journal standards. 

By following these steps, Paperpal not only simplifies the process of writing a research paper conclusion but also ensures it is impactful, concise, and aligned with academic standards. Sign up with Paperpal today and write your research paper conclusion 2x faster .  

The research paper conclusion is a crucial part of your paper as it provides the final opportunity to leave a strong impression on your readers. In the research paper conclusion, summarize the main points of your research paper by restating your research statement, highlighting the most important findings, addressing the research questions or objectives, explaining the broader context of the study, discussing the significance of your findings, providing recommendations if applicable, and emphasizing the takeaway message. The main purpose of the conclusion is to remind the reader of the main point or argument of your paper and to provide a clear and concise summary of the key findings and their implications. All these elements should feature on your list of what to put in the conclusion of a research paper to create a strong final statement for your work.

A strong conclusion is a critical component of a research paper, as it provides an opportunity to wrap up your arguments, reiterate your main points, and leave a lasting impression on your readers. Here are the key elements of a strong research paper conclusion: 1. Conciseness : A research paper conclusion should be concise and to the point. It should not introduce new information or ideas that were not discussed in the body of the paper. 2. Summarization : The research paper conclusion should be comprehensive enough to give the reader a clear understanding of the research’s main contributions. 3 . Relevance : Ensure that the information included in the research paper conclusion is directly relevant to the research paper’s main topic and objectives; avoid unnecessary details. 4 . Connection to the Introduction : A well-structured research paper conclusion often revisits the key points made in the introduction and shows how the research has addressed the initial questions or objectives. 5. Emphasis : Highlight the significance and implications of your research. Why is your study important? What are the broader implications or applications of your findings? 6 . Call to Action : Include a call to action or a recommendation for future research or action based on your findings.

The length of a research paper conclusion can vary depending on several factors, including the overall length of the paper, the complexity of the research, and the specific journal requirements. While there is no strict rule for the length of a conclusion, but it’s generally advisable to keep it relatively short. A typical research paper conclusion might be around 5-10% of the paper’s total length. For example, if your paper is 10 pages long, the conclusion might be roughly half a page to one page in length.

In general, you do not need to include citations in the research paper conclusion. Citations are typically reserved for the body of the paper to support your arguments and provide evidence for your claims. However, there may be some exceptions to this rule: 1. If you are drawing a direct quote or paraphrasing a specific source in your research paper conclusion, you should include a citation to give proper credit to the original author. 2. If your conclusion refers to or discusses specific research, data, or sources that are crucial to the overall argument, citations can be included to reinforce your conclusion’s validity.

The conclusion of a research paper serves several important purposes: 1. Summarize the Key Points 2. Reinforce the Main Argument 3. Provide Closure 4. Offer Insights or Implications 5. Engage the Reader. 6. Reflect on Limitations

Remember that the primary purpose of the research paper conclusion is to leave a lasting impression on the reader, reinforcing the key points and providing closure to your research. It’s often the last part of the paper that the reader will see, so it should be strong and well-crafted.

• Makar, G., Foltz, C., Lendner, M., & Vaccaro, A. R. (2018). How to write effective discussion and conclusion sections. Clinical spine surgery, 31(8), 345-346.
• Bunton, D. (2005). The structure of PhD conclusion chapters.  Journal of English for academic purposes ,  4 (3), 207-224.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects

7 Ways to Improve Your Academic Writing Process

• Paraphrasing in Academic Writing: Answering Top Author Queries

Preflight For Editorial Desk: The Perfect Hybrid (AI + Human) Assistance Against Compromised Manuscripts

You may also like, how to write your research paper in apa..., how to choose a dissertation topic, how to write a phd research proposal, how to write an academic paragraph (step-by-step guide), research funding basics: what should a grant proposal..., how to write an abstract in research papers..., how to write dissertation acknowledgements, how to write the first draft of a..., mla works cited page: format, template & examples, how to write a high-quality conference paper.

How to write a strong conclusion for your research paper

Last updated

17 February 2024

Reviewed by

Short on time? Get an AI generated summary of this article instead

Writing a research paper is a chance to share your knowledge and hypothesis. It's an opportunity to demonstrate your many hours of research and prove your ability to write convincingly.

Ideally, by the end of your research paper, you'll have brought your readers on a journey to reach the conclusions you've pre-determined. However, if you don't stick the landing with a good conclusion, you'll risk losing your reader’s trust.

Writing a strong conclusion for your research paper involves a few important steps, including restating the thesis and summing up everything properly.

Find out what to include and what to avoid, so you can effectively demonstrate your understanding of the topic and prove your expertise.

• Why is a good conclusion important?

A good conclusion can cement your paper in the reader’s mind. Making a strong impression in your introduction can draw your readers in, but it's the conclusion that will inspire them.

• What to include in a research paper conclusion

There are a few specifics you should include in your research paper conclusion. Offer your readers some sense of urgency or consequence by pointing out why they should care about the topic you have covered. Discuss any common problems associated with your topic and provide suggestions as to how these problems can be solved or addressed.

The conclusion should include a restatement of your initial thesis. Thesis statements are strengthened after you’ve presented supporting evidence (as you will have done in the paper), so make a point to reintroduce it at the end.

Finally, recap the main points of your research paper, highlighting the key takeaways you want readers to remember. If you've made multiple points throughout the paper, refer to the ones with the strongest supporting evidence.

• Steps for writing a research paper conclusion

Many writers find the conclusion the most challenging part of any research project . By following these three steps, you'll be prepared to write a conclusion that is effective and concise.

• Step 1: Restate the problem

Always begin by restating the research problem in the conclusion of a research paper. This serves to remind the reader of your hypothesis and refresh them on the main point of the paper. 

When restating the problem, take care to avoid using exactly the same words you employed earlier in the paper.

• Step 2: Sum up the paper

After you've restated the problem, sum up the paper by revealing your overall findings. The method for this differs slightly, depending on whether you're crafting an argumentative paper or an empirical paper.

Argumentative paper: Restate your thesis and arguments

Argumentative papers involve introducing a thesis statement early on. In crafting the conclusion for an argumentative paper, always restate the thesis, outlining the way you've developed it throughout the entire paper.

It might be appropriate to mention any counterarguments in the conclusion, so you can demonstrate how your thesis is correct or how the data best supports your main points.

Empirical paper: Summarize research findings

Empirical papers break down a series of research questions. In your conclusion, discuss the findings your research revealed, including any information that surprised you.

Be clear about the conclusions you reached, and explain whether or not you expected to arrive at these particular ones.

• Step 3: Discuss the implications of your research

Argumentative papers and empirical papers also differ in this part of a research paper conclusion. Here are some tips on crafting conclusions for argumentative and empirical papers.

Argumentative paper: Powerful closing statement

In an argumentative paper, you'll have spent a great deal of time expressing the opinions you formed after doing a significant amount of research. Make a strong closing statement in your argumentative paper's conclusion to share the significance of your work.

You can outline the next steps through a bold call to action, or restate how powerful your ideas turned out to be.

Empirical paper: Directions for future research

Empirical papers are broader in scope. They usually cover a variety of aspects and can include several points of view.

To write a good conclusion for an empirical paper, suggest the type of research that could be done in the future, including methods for further investigation or outlining ways other researchers might proceed.

If you feel your research had any limitations, even if they were outside your control, you could mention these in your conclusion.

After you finish outlining your conclusion, ask someone to read it and offer feedback. In any research project you're especially close to, it can be hard to identify problem areas. Having a close friend or someone whose opinion you value read the research paper and provide honest feedback can be invaluable. Take note of any suggested edits and consider incorporating them into your paper if they make sense.

• Things to avoid in a research paper conclusion

Keep these aspects to avoid in mind as you're writing your conclusion and refer to them after you've created an outline.

Dry summary

Writing a memorable, succinct conclusion is arguably more important than a strong introduction. Take care to avoid just rephrasing your main points, and don't fall into the trap of repeating dry facts or citations.

You can provide a new perspective for your readers to think about or contextualize your research. Either way, make the conclusion vibrant and interesting, rather than a rote recitation of your research paper’s highlights.

Clichéd or generic phrasing

Your research paper conclusion should feel fresh and inspiring. Avoid generic phrases like "to sum up" or "in conclusion." These phrases tend to be overused, especially in an academic context and might turn your readers off.

The conclusion also isn't the time to introduce colloquial phrases or informal language. Retain a professional, confident tone consistent throughout your paper’s conclusion so it feels exciting and bold.

New data or evidence

While you should present strong data throughout your paper, the conclusion isn't the place to introduce new evidence. This is because readers are engaged in actively learning as they read through the body of your paper.

By the time they reach the conclusion, they will have formed an opinion one way or the other (hopefully in your favor!). Introducing new evidence in the conclusion will only serve to surprise or frustrate your reader.

Ignoring contradictory evidence

If your research reveals contradictory evidence, don't ignore it in the conclusion. This will damage your credibility as an expert and might even serve to highlight the contradictions.

Be as transparent as possible and admit to any shortcomings in your research, but don't dwell on them for too long.

Ambiguous or unclear resolutions

The point of a research paper conclusion is to provide closure and bring all your ideas together. You should wrap up any arguments you introduced in the paper and tie up any loose ends, while demonstrating why your research and data are strong.

Use direct language in your conclusion and avoid ambiguity. Even if some of the data and sources you cite are inconclusive or contradictory, note this in your conclusion to come across as confident and trustworthy.

• Examples of research paper conclusions

Your research paper should provide a compelling close to the paper as a whole, highlighting your research and hard work. While the conclusion should represent your unique style, these examples offer a starting point:

Ultimately, the data we examined all point to the same conclusion: Encouraging a good work-life balance improves employee productivity and benefits the company overall. The research suggests that when employees feel their personal lives are valued and respected by their employers, they are more likely to be productive when at work. In addition, company turnover tends to be reduced when employees have a balance between their personal and professional lives. While additional research is required to establish ways companies can support employees in creating a stronger work-life balance, it's clear the need is there.

Social media is a primary method of communication among young people. As we've seen in the data presented, most young people in high school use a variety of social media applications at least every hour, including Instagram and Facebook. While social media is an avenue for connection with peers, research increasingly suggests that social media use correlates with body image issues. Young girls with lower self-esteem tend to use social media more often than those who don't log onto social media apps every day. As new applications continue to gain popularity, and as more high school students are given smartphones, more research will be required to measure the effects of prolonged social media use.

What are the different kinds of research paper conclusions?

There are no formal types of research paper conclusions. Ultimately, the conclusion depends on the outline of your paper and the type of research you’re presenting. While some experts note that research papers can end with a new perspective or commentary, most papers should conclude with a combination of both. The most important aspect of a good research paper conclusion is that it accurately represents the body of the paper.

Can I present new arguments in my research paper conclusion?

Research paper conclusions are not the place to introduce new data or arguments. The body of your paper is where you should share research and insights, where the reader is actively absorbing the content. By the time a reader reaches the conclusion of the research paper, they should have formed their opinion. Introducing new arguments in the conclusion can take a reader by surprise, and not in a positive way. It might also serve to frustrate readers.

How long should a research paper conclusion be?

There's no set length for a research paper conclusion. However, it's a good idea not to run on too long, since conclusions are supposed to be succinct. A good rule of thumb is to keep your conclusion around 5 to 10 percent of the paper's total length. If your paper is 10 pages, try to keep your conclusion under one page.

What should I include in a research paper conclusion?

A good research paper conclusion should always include a sense of urgency, so the reader can see how and why the topic should matter to them. You can also note some recommended actions to help fix the problem and some obstacles they might encounter. A conclusion should also remind the reader of the thesis statement, along with the main points you covered in the paper. At the end of the conclusion, add a powerful closing statement that helps cement the paper in the mind of the reader.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 18 April 2023

Last updated: 27 February 2023

Last updated: 6 February 2023

Last updated: 5 February 2023

Last updated: 16 April 2023

Last updated: 9 March 2023

Last updated: 30 April 2024

Last updated: 12 December 2023

Last updated: 11 March 2024

Last updated: 4 July 2024

Last updated: 6 March 2024

Last updated: 5 March 2024

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next, log in or sign up.

Get started for free

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 9. The Conclusion
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

The conclusion is intended to help the reader understand why your research should matter to them after they have finished reading the paper. A conclusion is not merely a summary of the main topics covered or a re-statement of your research problem, but a synthesis of key points derived from the findings of your study and, if applicable based on your analysis, explain new areas for future research. For most college-level research papers, two or three well-developed paragraphs is sufficient for a conclusion, although in some cases, more paragraphs may be required in describing the key findings and highlighting their significance.

Conclusions. The Writing Center. University of North Carolina; Conclusions. The Writing Lab and The OWL. Purdue University.

Importance of a Good Conclusion

A well-written conclusion provides important opportunities to demonstrate to the reader your understanding of the research problem. These include:

• Presenting the last word on the issues you raised in your paper . Just as the introduction gives a first impression to your reader, the conclusion offers a chance to leave a lasting impression. Do this, for example, by highlighting key findings in your analysis that advance new understanding about the research problem, that are unusual or unexpected, or that have important implications applied to practice.
• Summarizing your thoughts and conveying the larger significance of your study . The conclusion is an opportunity to succinctly re-emphasize  your answer to the "So What?" question by placing the study within the context of how your research advances past studies about the topic.
• Identifying how a gap in the literature has been addressed . The conclusion can be where you describe how a previously identified gap in the literature [first identified in your literature review section] has been addressed by your research and why this contribution is significant.
• Demonstrating the importance of your ideas . Don't be shy. The conclusion offers an opportunity to elaborate on the impact and significance of your findings. This is particularly important if your study approached examining the research problem from an unusual or innovative perspective.
• Introducing possible new or expanded ways of thinking about the research problem . This does not refer to introducing new information [which should be avoided], but to offer new insight and creative approaches for framing or contextualizing the research problem based on the results of your study.

Bunton, David. “The Structure of PhD Conclusion Chapters.” Journal of English for Academic Purposes 4 (July 2005): 207–224; Conclusions. The Writing Center. University of North Carolina; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion. San Francisco Edit, 2003-2008; Conclusions. The Writing Lab and The OWL. Purdue University; Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8.

Structure and Writing Style

I.  General Rules

The general function of your paper's conclusion is to restate the main argument . It reminds the reader of your main argument(s) strengths and reiterates the most important evidence supporting those argument(s). Do this by clearly summarizing the context, background, and the necessity of examining the research problem in relation to an issue, controversy, or a gap found in the literature. However, make sure that your conclusion is not simply a repetitive summary of the findings. This reduces the impact of the argument(s) you have developed in your paper.

When writing the conclusion to your paper, follow these general rules:

• Present your conclusions in clear, concise language. Re-state the purpose of your study, then describe how your findings differ or support those of other studies and why [i.e., describe what were the unique, new, or crucial contributions your study made to the overall research about your topic].
• Do not simply reiterate your findings or the discussion of your results. Provide a synthesis of arguments presented in the paper to show how these converge to address the research problem and the overall objectives of your study.
• Indicate opportunities for future research if you haven't already done so in the discussion section of your paper. Highlighting the need for further research provides the reader with evidence that you have an in-depth awareness of the research problem but that further analysis should take place beyond the scope of your investigation.

Consider the following points to help ensure your conclusion is presented well:

• If the argument or purpose of your paper is complex, you may need to summarize the argument for your reader.
• If, prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the end of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration that returns the topic to the context provided by the introduction or within a new context that emerges from the data [this is opposite of the introduction, which begins with general discussion of the context and ends with a detailed description of the research problem]. 

The conclusion also provides a place for you to persuasively and succinctly restate the research problem, given that the reader has now been presented with all the information about the topic . Depending on the discipline you are writing in, the concluding paragraph may contain your reflections on the evidence presented. However, the nature of being introspective about the research you have conducted will depend on the topic and whether your professor wants you to express your observations in this way. If asked to think introspectively about the topic, do not delve into idle speculation. Being introspective means looking within yourself as an author to try and understand an issue more deeply, not to guess at possible outcomes or make up scenarios not supported by the evidence.

II.  Developing a Compelling Conclusion

Although an effective conclusion needs to be clear and succinct, it does not need to be written passively or lack a compelling narrative. Strategies to help you move beyond merely summarizing the key points of your research paper may include any of the following:

• If your paper addresses a critical, contemporary problem, warn readers of the possible consequences of not attending to the problem proactively based on the evidence presented in your study.
• Recommend a specific course or courses of action that, if adopted, could address a specific problem in practice or in the development of new knowledge leading to positive change.
• Cite a relevant quotation or expert opinion already noted in your paper in order to lend authority and support to the conclusion(s) you have reached [a good source would be from a source cited in your literature review].
• Explain the consequences of your research in a way that elicits action or demonstrates urgency in seeking change.
• Restate a key statistic, fact, or visual image to emphasize the most important finding of your paper.
• If your discipline encourages personal reflection, illustrate your concluding point by drawing from your own life experiences.
• Return to an anecdote, an example, or a quotation that you presented in your introduction, but add further insight derived from the findings of your study; use your interpretation of results from your study to recast it in new or important ways.
• Provide a "take-home" message in the form of a succinct, declarative statement that you want the reader to remember about your study.

III. Problems to Avoid

Failure to be concise Your conclusion section should be concise and to the point. Conclusions that are too lengthy often have unnecessary information in them. The conclusion is not the place for details about your methodology or results. Although you should give a summary of what was learned from your research, this summary should be relatively brief, since the emphasis in the conclusion is on the implications, evaluations, insights, and other forms of analysis that you make. Strategies for writing concisely can be found here .

Failure to comment on larger, more significant issues In the introduction, your task was to move from the general [topic studied within the field of study] to the specific [the research problem]. However, in the conclusion, your task is to move the discussion from specific [your research problem] back to a general discussion framed around the implications and significance of your findings [i.e., how your research contributes new understanding or fills an important gap in the literature]. In short, the conclusion is where you should place your research within a larger context [visualize the structure of your paper as an hourglass--start with a broad introduction and review of the literature, move to the specific method of analysis and the discussion, conclude with a broad summary of the study's implications and significance].

Failure to reveal problems and negative results Negative aspects of the research process should never be ignored. These are problems, deficiencies, or challenges encountered during your study. They should be summarized as a way of qualifying your overall conclusions. If you encountered negative or unintended results [i.e., findings that are validated outside the research context in which they were generated], you must report them in the results section and discuss their implications in the discussion section of your paper. In the conclusion, use negative or surprising results as an opportunity to explain their possible significance and/or how they may form the basis for future research.

Failure to provide a clear summary of what was learned In order to discuss how your research fits within your field of study [and possibly the world at large], you need to summarize briefly and succinctly how it contributes to new knowledge or a new understanding about the research problem. This element of your conclusion may be only a few sentences long, but it often represents the key takeaway for your reader.

Failure to match the objectives of your research Often research objectives in the social and behavioral sciences change while the research is being carried out due to unforeseen factors or unanticipated variables. This is not a problem unless you forget to go back and refine the original objectives in your introduction. As these changes emerge they must be documented so that they accurately reflect what you were trying to accomplish in your research [not what you thought you might accomplish when you began].

Resist the urge to apologize If you've immersed yourself in studying the research problem, you presumably should know a good deal about it [perhaps even more than your professor!]. Nevertheless, by the time you have finished writing, you may be having some doubts about what you have produced. Repress those doubts! Don't undermine your authority as a researcher by saying something like, "This is just one approach to examining this problem; there may be other, much better approaches that...." The overall tone of your conclusion should convey confidence to the reader concerning the validity and realiability of your research.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8; Concluding Paragraphs. College Writing Center at Meramec. St. Louis Community College; Conclusions. The Writing Center. University of North Carolina; Conclusions. The Writing Lab and The OWL. Purdue University; Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. The Lab Report. University College Writing Centre. University of Toronto; Leibensperger, Summer. Draft Your Conclusion. Academic Center, the University of Houston-Victoria, 2003; Make Your Last Words Count. The Writer’s Handbook. Writing Center. University of Wisconsin Madison; Miquel, Fuster-Marquez and Carmen Gregori-Signes. “Chapter Six: ‘Last but Not Least:’ Writing the Conclusion of Your Paper.” In Writing an Applied Linguistics Thesis or Dissertation: A Guide to Presenting Empirical Research . John Bitchener, editor. (Basingstoke,UK: Palgrave Macmillan, 2010), pp. 93-105; Tips for Writing a Good Conclusion. Writing@CSU. Colorado State University; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion. San Francisco Edit, 2003-2008; Writing Conclusions. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Writing: Considering Structure and Organization. Institute for Writing Rhetoric. Dartmouth College.

Writing Tip

Don't Belabor the Obvious!

Avoid phrases like "in conclusion...," "in summary...," or "in closing...." These phrases can be useful, even welcome, in oral presentations. But readers can see by the tell-tale section heading and number of pages remaining that they are reaching the end of your paper. You'll irritate your readers if you belabor the obvious.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8.

Another Writing Tip

New Insight, Not New Information!

Don't surprise the reader with new information in your conclusion that was never referenced anywhere else in the paper. This is why the conclusion rarely has citations to sources that haven't been referenced elsewhere in your paper. If you have new information to present, add it to the discussion or other appropriate section of the paper. Note that, although no new information is introduced, the conclusion, along with the discussion section, is where you offer your most "original" contributions in the paper; the conclusion is where you describe the value of your research, demonstrate that you understand the material that you have presented, and position your findings within the larger context of scholarship on the topic, including describing how your research contributes new insights to that scholarship.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8; Conclusions. The Writing Center. University of North Carolina.

• << Previous: Limitations of the Study
• Next: Appendices >>
• Last Updated: Aug 13, 2024 12:57 PM
• URL: https://libguides.usc.edu/writingguide

• Privacy Policy

Home » Research Paper Conclusion – Writing Guide and Examples

Research Paper Conclusion – Writing Guide and Examples

Table of Contents

Research Paper Conclusion

Definition:

A research paper conclusion is the final section of a research paper that summarizes the key findings, significance, and implications of the research. It is the writer’s opportunity to synthesize the information presented in the paper, draw conclusions, and make recommendations for future research or actions.

The conclusion should provide a clear and concise summary of the research paper, reiterating the research question or problem, the main results, and the significance of the findings. It should also discuss the limitations of the study and suggest areas for further research.

Parts of Research Paper Conclusion

The parts of a research paper conclusion typically include:

Restatement of the Thesis

The conclusion should begin by restating the thesis statement from the introduction in a different way. This helps to remind the reader of the main argument or purpose of the research.

Summary of Key Findings

The conclusion should summarize the main findings of the research, highlighting the most important results and conclusions. This section should be brief and to the point.

Implications and Significance

In this section, the researcher should explain the implications and significance of the research findings. This may include discussing the potential impact on the field or industry, highlighting new insights or knowledge gained, or pointing out areas for future research.

Limitations and Recommendations

It is important to acknowledge any limitations or weaknesses of the research and to make recommendations for how these could be addressed in future studies. This shows that the researcher is aware of the potential limitations of their work and is committed to improving the quality of research in their field.

Concluding Statement

The conclusion should end with a strong concluding statement that leaves a lasting impression on the reader. This could be a call to action, a recommendation for further research, or a final thought on the topic.

How to Write Research Paper Conclusion

Here are some steps you can follow to write an effective research paper conclusion:

• Restate the research problem or question: Begin by restating the research problem or question that you aimed to answer in your research. This will remind the reader of the purpose of your study.
• Summarize the main points: Summarize the key findings and results of your research. This can be done by highlighting the most important aspects of your research and the evidence that supports them.
• Discuss the implications: Discuss the implications of your findings for the research area and any potential applications of your research. You should also mention any limitations of your research that may affect the interpretation of your findings.
• Provide a conclusion : Provide a concise conclusion that summarizes the main points of your paper and emphasizes the significance of your research. This should be a strong and clear statement that leaves a lasting impression on the reader.
• Offer suggestions for future research: Lastly, offer suggestions for future research that could build on your findings and contribute to further advancements in the field.

Remember that the conclusion should be brief and to the point, while still effectively summarizing the key findings and implications of your research.

Example of Research Paper Conclusion

Here’s an example of a research paper conclusion:

Conclusion :

In conclusion, our study aimed to investigate the relationship between social media use and mental health among college students. Our findings suggest that there is a significant association between social media use and increased levels of anxiety and depression among college students. This highlights the need for increased awareness and education about the potential negative effects of social media use on mental health, particularly among college students.

Despite the limitations of our study, such as the small sample size and self-reported data, our findings have important implications for future research and practice. Future studies should aim to replicate our findings in larger, more diverse samples, and investigate the potential mechanisms underlying the association between social media use and mental health. In addition, interventions should be developed to promote healthy social media use among college students, such as mindfulness-based approaches and social media detox programs.

Overall, our study contributes to the growing body of research on the impact of social media on mental health, and highlights the importance of addressing this issue in the context of higher education. By raising awareness and promoting healthy social media use among college students, we can help to reduce the negative impact of social media on mental health and improve the well-being of young adults.

Purpose of Research Paper Conclusion

The purpose of a research paper conclusion is to provide a summary and synthesis of the key findings, significance, and implications of the research presented in the paper. The conclusion serves as the final opportunity for the writer to convey their message and leave a lasting impression on the reader.

The conclusion should restate the research problem or question, summarize the main results of the research, and explain their significance. It should also acknowledge the limitations of the study and suggest areas for future research or action.

Overall, the purpose of the conclusion is to provide a sense of closure to the research paper and to emphasize the importance of the research and its potential impact. It should leave the reader with a clear understanding of the main findings and why they matter. The conclusion serves as the writer’s opportunity to showcase their contribution to the field and to inspire further research and action.

When to Write Research Paper Conclusion

The conclusion of a research paper should be written after the body of the paper has been completed. It should not be written until the writer has thoroughly analyzed and interpreted their findings and has written a complete and cohesive discussion of the research.

Before writing the conclusion, the writer should review their research paper and consider the key points that they want to convey to the reader. They should also review the research question, hypotheses, and methodology to ensure that they have addressed all of the necessary components of the research.

Once the writer has a clear understanding of the main findings and their significance, they can begin writing the conclusion. The conclusion should be written in a clear and concise manner, and should reiterate the main points of the research while also providing insights and recommendations for future research or action.

Characteristics of Research Paper Conclusion

The characteristics of a research paper conclusion include:

• Clear and concise: The conclusion should be written in a clear and concise manner, summarizing the key findings and their significance.
• Comprehensive: The conclusion should address all of the main points of the research paper, including the research question or problem, the methodology, the main results, and their implications.
• Future-oriented : The conclusion should provide insights and recommendations for future research or action, based on the findings of the research.
• Impressive : The conclusion should leave a lasting impression on the reader, emphasizing the importance of the research and its potential impact.
• Objective : The conclusion should be based on the evidence presented in the research paper, and should avoid personal biases or opinions.
• Unique : The conclusion should be unique to the research paper and should not simply repeat information from the introduction or body of the paper.

Advantages of Research Paper Conclusion

The advantages of a research paper conclusion include:

• Summarizing the key findings : The conclusion provides a summary of the main findings of the research, making it easier for the reader to understand the key points of the study.
• Emphasizing the significance of the research: The conclusion emphasizes the importance of the research and its potential impact, making it more likely that readers will take the research seriously and consider its implications.
• Providing recommendations for future research or action : The conclusion suggests practical recommendations for future research or action, based on the findings of the study.
• Providing closure to the research paper : The conclusion provides a sense of closure to the research paper, tying together the different sections of the paper and leaving a lasting impression on the reader.
• Demonstrating the writer’s contribution to the field : The conclusion provides the writer with an opportunity to showcase their contribution to the field and to inspire further research and action.

Limitations of Research Paper Conclusion

While the conclusion of a research paper has many advantages, it also has some limitations that should be considered, including:

• I nability to address all aspects of the research: Due to the limited space available in the conclusion, it may not be possible to address all aspects of the research in detail.
• Subjectivity : While the conclusion should be objective, it may be influenced by the writer’s personal biases or opinions.
• Lack of new information: The conclusion should not introduce new information that has not been discussed in the body of the research paper.
• Lack of generalizability: The conclusions drawn from the research may not be applicable to other contexts or populations, limiting the generalizability of the study.
• Misinterpretation by the reader: The reader may misinterpret the conclusions drawn from the research, leading to a misunderstanding of the findings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Scope of the Research – Writing Guide and...

Research Report – Example, Writing Guide and...

Literature Review – Types Writing Guide and...

APA Table of Contents – Format and Example

Research Methodology – Types, Examples and...

Research Paper Introduction – Writing Guide and...

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Write a Conclusion for a Research Paper

• 3-minute read
• 29th August 2023

If you’re writing a research paper, the conclusion is your opportunity to summarize your findings and leave a lasting impression on your readers. In this post, we’ll take you through how to write an effective conclusion for a research paper and how you can:

·   Reword your thesis statement

·   Highlight the significance of your research

·   Discuss limitations

·   Connect to the introduction

·   End with a thought-provoking statement

Rewording Your Thesis Statement

Begin your conclusion by restating your thesis statement in a way that is slightly different from the wording used in the introduction. Avoid presenting new information or evidence in your conclusion. Just summarize the main points and arguments of your essay and keep this part as concise as possible. Remember that you’ve already covered the in-depth analyses and investigations in the main body paragraphs of your essay, so it’s not necessary to restate these details in the conclusion.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

Highlighting the Significance of Your Research

The conclusion is a good place to emphasize the implications of your research . Avoid ambiguous or vague language such as “I think” or “maybe,” which could weaken your position. Clearly explain why your research is significant and how it contributes to the broader field of study.

Here’s an example from a (fictional) study on the impact of social media on mental health:

Discussing Limitations

Although it’s important to emphasize the significance of your study, you can also use the conclusion to briefly address any limitations you discovered while conducting your research, such as time constraints or a shortage of resources. Doing this demonstrates a balanced and honest approach to your research.

Connecting to the Introduction

In your conclusion, you can circle back to your introduction , perhaps by referring to a quote or anecdote you discussed earlier. If you end your paper on a similar note to how you began it, you will create a sense of cohesion for the reader and remind them of the meaning and significance of your research.

Ending With a Thought-Provoking Statement

Consider ending your paper with a thought-provoking and memorable statement that relates to the impact of your research questions or hypothesis. This statement can be a call to action, a philosophical question, or a prediction for the future (positive or negative). Here’s an example that uses the same topic as above (social media and mental health):

Expert Proofreading Services

Ensure that your essay ends on a high note by having our experts proofread your research paper. Our team has experience with a wide variety of academic fields and subjects and can help make your paper stand out from the crowd – get started today and see the difference it can make in your work.

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

5-minute read

Free Email Newsletter Template (2024)

Promoting a brand means sharing valuable insights to connect more deeply with your audience, and...

6-minute read

How to Write a Nonprofit Grant Proposal

If you’re seeking funding to support your charitable endeavors as a nonprofit organization, you’ll need...

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

4-minute read

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

Make sure your writing is the best it can be with our expert English proofreading and editing.

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

How to Write a Conclusion for a Research Paper

Table of Contents

Writing a conclusion for a research paper is a critical step that often determines the overall impact and impression the paper leaves on the reader. While some may view the conclusion as a mere formality, it is actually an opportunity to wrap up the main points, provide closure, and leave a lasting impression. In this article, we will explore the importance of a well-crafted conclusion and discuss various tips and strategies to help you write an engaging and impactful conclusion for your research paper.

Introduction

Before delving into the specifics of writing a conclusion, it is important to understand why it is such a crucial component of a research paper. The conclusion serves to summarize the main points of the paper and reemphasize their significance. A well-written conclusion can leave the reader satisfied and inspired, while a poorly executed one may undermine the credibility of the entire paper. Therefore, it is essential to give careful thought and attention to crafting an effective conclusion.

When writing a research paper, the conclusion acts as the final destination for the reader. It is the point where all the information, arguments, and evidence presented throughout the paper converge. Just as a traveler reaches the end of a journey, the reader reaches the conclusion to find closure and a sense of fulfillment. This is why the conclusion should not be taken lightly; it is a critical opportunity to leave a lasting impact on the reader.

Moreover, the conclusion is not merely a repetition of the introduction or a summary of the main points. It goes beyond that by providing a deeper understanding of the research findings and their implications. It allows the writer to reflect on the significance of their work and its potential contributions to the field. By doing so, the conclusion elevates the research paper from a mere collection of facts to a thought-provoking piece of scholarship.

In the following sections, we will explore various strategies and techniques for crafting a compelling conclusion. By understanding the importance of the conclusion and learning how to write one effectively, you will be equipped to create impactful research papers.

Structuring the Conclusion

In order to create an effective conclusion, it is important to consider its structure. A well-structured conclusion should begin by restating the thesis statement and summarizing the main points of the paper. It should then move on to provide a concise synthesis of the key findings and arguments, highlighting their implications and relevance. Finally, the conclusion should end with a thought-provoking statement that leaves the reader with a lasting impression.

Additionally, using phrases like "this research demonstrates," "the findings show," or "it is clear that" can help to highlight the significance of your research and emphasize your main conclusions.

Tips for Writing an Engaging Conclusion

Writing an engaging conclusion requires careful consideration and attention to detail. Here are some tips to help you create an impactful conclusion for your research paper:

• Revisit the Introduction: Start your conclusion by referencing your introduction. Remind the reader of the research question or problem you initially posed and show how your research has addressed it.
• Summarize Your Main Points: Provide a concise summary of the main points and arguments presented in your paper. Be sure to restate your thesis statement and highlight the key findings.
• Offer a Fresh Perspective: Use the conclusion as an opportunity to provide a fresh perspective or offer insights that go beyond the main body of the paper. This will leave the reader with something new to consider.
• Leave a Lasting Impression: End your conclusion with a thought-provoking statement or a call to action. This will leave a lasting impression on the reader and encourage further exploration of the research topic.

Addressing Counter Arguments In Conclusion

While crafting your conclusion, you can address any potential counterarguments or limitations of your research. This will demonstrate that you have considered alternative perspectives and have taken them into account in your conclusions. By acknowledging potential counterarguments, you can strengthen the credibility and validity of your research. And by openly discussing limitations, you demonstrate transparency and honesty in your research process.

Language and Tone To Be Used In Conclusion

The language and tone of your conclusion play a crucial role in shaping the overall impression of your research paper. It is important to use clear and concise language that is appropriate for the academic context. Avoid using overly informal or colloquial language that may undermine the credibility of your research. Additionally, consider the tone of your conclusion – it should be professional, confident, and persuasive, while still maintaining a respectful and objective tone.

When it comes to the language used in your conclusion, precision is key. You want to ensure that your ideas are communicated effectively and that there is no room for misinterpretation. Using clear and concise language will not only make your conclusion easier to understand but will also demonstrate your command of the subject matter.

Furthermore, it is important to strike the right balance between formality and accessibility. While academic writing typically requires a more formal tone, you should still aim to make your conclusion accessible to a wider audience. This means avoiding jargon or technical terms that may confuse readers who are not familiar with the subject matter. Instead, opt for language that is clear and straightforward, allowing anyone to grasp the main points of your research.

Another aspect to consider is the tone of your conclusion. The tone should reflect the confidence you have in your research findings and the strength of your argument. By adopting a professional and confident tone, you are more likely to convince your readers of the validity and importance of your research. However, it is crucial to strike a balance and avoid sounding arrogant or dismissive of opposing viewpoints. Maintaining a respectful and objective tone will help you engage with your audience in a more persuasive manner.

Moreover, the tone of your conclusion should align with the overall tone of your research paper. Consistency in tone throughout your paper will create a cohesive and unified piece of writing.

Common Mistakes to Avoid While Writing a Conclusion

When writing a conclusion, there are several common mistakes that researchers often make. By being aware of these pitfalls, you can avoid them and create a more effective conclusion for your research paper. Some common mistakes include:

• Repeating the Introduction: A conclusion should not simply be a reworded version of the introduction. While it is important to revisit the main points, try to present them in a fresh and broader perspective, by foregrounding the implications/impacts of your research.
• Introducing New Information: The conclusion should not introduce any new information or arguments. Instead, it should focus on summarizing and synthesizing the main points presented in the paper.
• Being Vague or General: Avoid using vague or general statements in your conclusion. Instead, be specific and provide concrete examples or evidence to support your main points.
• Ending Abruptly: A conclusion should provide a sense of closure and completeness. Avoid ending your conclusion abruptly or leaving the reader with unanswered questions.

Editing and Revising the Conclusion

Just like the rest of your research paper, the conclusion should go through a thorough editing and revising process. This will help to ensure clarity, coherence, and impact in the conclusion. As you revise your conclusion, consider the following:

• Check for Consistency: Ensure that your conclusion aligns with the main body of the paper and does not introduce any new or contradictory information.
• Eliminate Redundancy: Remove any repetitive or redundant information in your conclusion. Instead, focus on presenting the key points in a concise and engaging manner.
• Proofread for Clarity: Read your conclusion aloud or ask someone else to read it to ensure that it is clear and understandable. Check for any grammatical or spelling errors that may distract the reader.
• Seek Feedback: Consider sharing your conclusion with peers or mentors to get their feedback and insights. This can help you strengthen your conclusion and make it more impactful.

How to Write Conclusion as a Call to Action

Finally, consider using your conclusion as a call to action. Encourage the reader to take further action, such as conducting additional research or considering the implications of your findings. By providing a clear call to action, you can inspire the reader to actively engage with your research and continue the conversation on the topic.

Adapting to Different Research Paper Types

It is important to adapt your conclusion approach based on the type of research paper you are writing. Different research paper types may require different strategies and approaches to writing the conclusion. For example, a scientific research paper may focus more on summarizing the key findings and implications, while a persuasive research paper may emphasize the call to action and the potential impact of the research. Tailor your conclusion to suit the specific goals and requirements of your research paper.

Final Thoughts

A well-crafted conclusion can leave a lasting impression on the reader and enhance the impact of your research. By following the tips and strategies outlined in this article, you can create an engaging and impactful conclusion that effectively summarizes your main points, addresses potential counterarguments, and leaves the reader with a sense of closure and inspiration. Embrace the importance of the conclusion and view it as an opportunity to showcase the significance and relevance of your research.

Important Reads

How To Humanize AI Text In Scientific Articles

Elevate Your Writing Game With AI Grammar Checker Tools

A Guide to Using AI Tools to Summarize Literature Reviews

AI for Essay Writing — Exploring Top 10 Essay Writers

Role of AI in Systematic Literature Review

You might also like

Boosting Citations: A Comparative Analysis of Graphical Abstract vs. Video Abstract

The Impact of Visual Abstracts on Boosting Citations

Introducing SciSpace’s Citation Booster To Increase Research Visibility

Research Paper Conclusion: How to Wrap Up Research

Table of contents

• 1 What Is a Research Paper Conclusion?
• 2.1 Summary Conclusion
• 2.2 Editorial Conclusion
• 2.3 Externalizing Conclusion
• 2.4 Synthesis Conclusion
• 2.5 Projective Conclusion
• 3 Core Elements of a Strong Conclusion
• 4.1 Repeat Your Research Question
• 4.2 Explore the Main Points
• 4.3 Synthesize, not Summarize
• 4.4 Talk About Implications
• 4.5 Set Up the Limitations
• 4.6 Guide to the Future Directions
• 4.7 Provide a Strong Thesis Statement
• 4.8 Keep It Short
• 4.9 Watch Out Your Paper’s Tone
• 5 Dos and Don’ts to End a Research Paper
• 6.1 Research Paper Conclusion Example #1
• 6.2 Research Paper Conclusion Example #2
• 7 Summing Up

When writing a research paper conclusion, It may be fascinating and difficult to summarize your key points. What should you do when the deadline is close, and you still have a blank piece of paper? To score well and make an impression on your professor, you must put in much mental effort and write with complete focus and attention.

Alternatively, you can pay for research papers and get expert guidance on any topic if you have a short deadline.

To give you a starting point, we will reckon on the following points:

• What is the conclusion of the research paper?
• What are the types of research paper conclusions?
• How to synthesize information to reinforce your central argument?
• How to write a research paper conclusion?

What Is a Research Paper Conclusion?

The conclusion is a summary of the research key findings and offers a general perspective on the study’s objectives. It often reiterates the research question, summarizing the main results and their significance. This section typically addresses whether the initial hypothesis was supported and discusses any unexpected outcomes.

Additionally, researchers may highlight the study’s limitations and propose avenues for future research.

The conclusion in the research serves to leave a lasting impression on the reader, emphasizing the broader implications of the study and its potential impact. It provides closure by reinforcing and contextualizing the study’s contributions within the existing knowledge.

5 Types of Research Paper Conclusions

The quality of a research paper can be significantly impacted by its conclusion. A strong conclusion for research paper will draw together the key findings, key arguments, and supporting evidence. Your research’s major components and concluding paragraphs offer the reader a feeling of finality.

Research paper layout can include a variety of conclusions, each with a unique goal of influencing the reader.

Summary Conclusion

The most typical kind of research paper conclusion is the direct summary, which briefly restates the main ideas. Before you write a conclusion for a research paper, remember to do more than just a summary. Include a few words that provide context or more information.

Editorial Conclusion

This type of conclusion focuses on the author’s opinion about the research findings. It needs to have an impelling lead paragraph, with the most emphatic writing at the beginning and the end.

Externalizing Conclusion

An externalizing conclusion paragraph for research paper presents a solution to the issue or an ongoing argument you’re covering. It also provides the prospective outcomes in case the problem remains unsolved.

Synthesis Conclusion

The synthesis conclusion shows the interconnection between all the ideas presented in the paper body. To conclude a research paper with an open end, you must examine various sources and prove that they connect with your primary thesis.

Projective Conclusion

This type of conclusion works especially well for answering research question . It describes the future outcomes of actions presented in the paper body.

Core Elements of a Strong Conclusion

The start of a conclusion serves as the final impression of a written work, encapsulating the content essence.

• Summarization is a key element, where the main points and findings are concisely restated. To write a good research paper , you should reaffirm the reader’s understanding and reinforce the significance of the research.
• Synthesis involves combining different paper elements and weaving them into a cohesive narrative. It goes beyond summarization by highlighting the connections between various sections and demonstrating how they contribute to the thesis. It helps in providing a holistic view of the subject matter.
• Discussing implications is crucial for a comprehensive conclusion. Writing a conclusion for a research paper involves exploring the work’s broader significance – how the findings impact the field of study or real-world applications. It extends the relevance of the research beyond its immediate context.
• Recommendations offer guidance for future research or practical actions. They provide a forward-looking perspective, whether suggesting avenues for further study or proposing applications of the findings. Besides, they encourage the continuation of scholarly inquiry.

As a result, a strong conclusion marries summarization, synthesis, implications, and recommendations. It leaves a lasting impression by reinforcing the paper’s key elements and positioning them within a larger context, making a compelling case for the significance and future directions of the work.

The Best Strategy for Writing an Effective Conclusion

Writing an effective conclusion for a research paper is a critical aspect of the overall document, providing a sense of closure while leaving a lasting impression on the reader. Several key strategies contribute to crafting a conclusion that encapsulates the essence of the research and reinforces its significance.

So, how to write a conclusion to a research paper you’ll be proud of? Let’s explore the best working strategies!

Repeat Your Research Question

The conclusion should circle back to the core argument or inquiry posed at the beginning of the paper. Among various steps to writing a conclusion, this reaffirmation reminds the reader of the central focus, providing a clear anchor for the closing remarks.

Explore the Main Points

While restating the thesis addresses the central idea, summarizing key points ensures that the reader comprehensively understands the main findings and supporting arguments. This concise recapitulation sets the stage for the subsequent elements of the conclusion.

Synthesize, not Summarize

A strong conclusion goes beyond mere summarization – it synthesizes the information. Instead of presenting a linear repetition of facts, combine the main points, emphasizing the interconnectedness of ideas. This synthesis demonstrates the depth of understanding and mastery of the subject matter, leaving a more profound impact on the reader.

Talk About Implications

What real-world applications or theoretical advancements does it suggest? Addressing these questions, the conclusion elevates the research from a mere academic exercise to a meaningful contribution to the field.

Set Up the Limitations

Every research endeavor has its methodological, logistical, or conceptual constraints. Acknowledging these limitations demonstrates transparency and intellectual honesty. It also allows future researchers to build upon the current work, contributing to the ongoing evolution of knowledge in the field.

Guide to the Future Directions

While acknowledging limitations, the conclusion should also offer constructive insights. What areas warrant further investigation? Are there practical applications of the research that could be explored? These recommendations provide a forward-looking perspective, emphasizing the dynamic nature of scholarly inquiry.

Provide a Strong Thesis Statement

It can be a thought-provoking insight, a call to action, or a reflection on the broader implications of the research. A memorable closing statement leaves a lasting impression, reinforcing the work’s significance in the reader’s mind.

Keep It Short

The conclusion is not the place for extensive elaboration. Remember to encapsulate the main points and findings to write a good conclusion for a research paper.

While the introduction of the paper covers the essential elements, it’s crucial to avoid unnecessary repetition or the new information introduction.

Watch Out Your Paper’s Tone

The conclusion should follow suit if the research paper has maintained a formal and academic tone. Similarly, if the paper adopted a more conversational or persuasive style, the conclusion should harmonize with that tone. Consistency in tone enhances the overall coherence and impact of the paper.

By following these steps, you can create a conclusion that effectively summarizes your research and leaves a lasting impression on your readers.

Dos and Don’ts to End a Research Paper

Here are some tips on how to write a conclusion for a research paper:

• Primarily, start characterizing your attitude to the topic and substantiating its relevance. Afterward, explain the difficulties you’ve encountered during the analysis. The outcome of this paragraph should be riveting and informative. A professor should convince himself that the student approached the analysis with enthusiasm.
• Secondly, read all your tasks recollected in the introduction and describe in detail the process of achieving them while writing the thesis. In the concluding paragraph, scribe a brief statement of the ideas resolved based on the evidence contained within the paper. Describe how you coped with the task and summarize your main conclusions.
• Thirdly, make a short description of each section. This helps draw an illation and finish statements giving voice to your ideas. Remember that every paragraph should be linked to the previous one.

It is crucial to keep in mind both the sort of paper you are writing and the main goal while you write a conclusion for research paper.

Among the most important things to leave out of a conclusion are:

• Make any new claims or introduce new material that does not directly relate to your points in the paper.
• Incorporate your opinion on the topic or speculate on future research.
• Summarize what has already been stated in the paper.
• Insert unrelated anecdotes.
• Draw overly general conclusions and lab reports that do not fully reflect the evidence presented in the paper. It shows negative aspects to a conclusion.

The conclusion must highlight your most important discoveries in a favorable light and demonstrate how your work advances the field. Thus, it should promote introspection on one’s life and how this subject could apply to society or our lives.

Before you start a conclusion paragraph for a research paper, remember to inspire readers to think about the consequences of your study for a considerable amount of time.

Research Paper Conclusion Example

A research article’s conclusion should use all available data to bolster its findings. It’s crucial to avoid adding any fresh concepts or supporting data in this part. Additionally, the conclusion must highlight the ideas discussed in the paper and throughout the oral presentations.

Consider the best way to summarize the evidence and how it relates to the research paper topic while writing the conclusion. When you write a conclusion in a research paper, provide a thorough justification and a comprehensive grasp of your study.

Research Paper Conclusion Example #1

This research sheds light on the intricate relationship between social media use and mental health outcomes among adolescents. Through a comprehensive analysis of survey data and psychological assessments, it becomes evident that excessive social media engagement correlates with heightened levels of anxiety and depression.

While the findings underscore the need for increased awareness and responsible social media usage, they also point towards potential intervention strategies. Incorporating digital literacy programs in schools and fostering open dialogues between parents, educators, and young individuals can play pivotal roles in mitigating the adverse effects identified in this study.

By addressing the challenges associated with social media, society can harness its benefits while safeguarding the mental well-being of its youngest members.

Explanation:

In this example, the conclusion summarizes the main findings – specifically, the correlation between social media use and adolescent mental health issues. It succinctly restates the importance of the research and its implications. The synthesis of the information is evident in the proposed intervention strategies, showcasing a forward-looking perspective.

Acknowledging the need for responsible social media usage and recommending concrete actions add depth to the conclusion. The final sentence wraps up the conclusion by emphasizing the balance between harnessing the benefits of social media and safeguarding the mental well-being of adolescents. Thus, it leaves the reader with a clear takeaway from the research.

Research Paper Conclusion Example #2

In conclusion, this research has shown that social media can impact mental health in teens. It was found that some teens feel bad when they use social media a lot. This is important because mental health is important. In the future, more research should be done on this topic.

This conclusion example is considered weak for several reasons. Firstly, it lacks a clear restatement of the thesis or main research question, failing to provide a strong focus for the conclusion. The summary of findings is overly general and lacks specificity, merely stating that social media can impact mental health without delving into the nuances revealed in the study.

Additionally, the statement on the importance of mental health is vague and does not draw on the specific results of the research. The recommendation for future research is generic and does not offer concrete suggestions or insights into potential areas of exploration. Overall, this conclusion lacks depth, fails to synthesize key information, and does not leave a lasting impression on the reader.

Close off the paper by revisiting the issue addressed in your introduction. Connecting the beginning and end of your essay is essential if you want it to feel complete. Refrain from leaving any questions unanswered. Doing so will leave the reader satisfied, and they will remember it while pursuing their research path.

Wondering what should the conclusion of a research paper contain? If you follow these tips when writing your conclusion paper, you’ll finish the assignment as effectively as possible. Since we’ve previously assisted, there’s no need to make up new guidelines or ask for it.

Plus, if you need assistance describing your academic study, our pro essay writers at PapersOwl offer experienced research paper writing services. Let us assist you; we’ll handle the task! With our assistance, you may get the greatest outcomes and save time and effort.

Readers also enjoyed

WHY WAIT? PLACE AN ORDER RIGHT NOW!

Just fill out the form, press the button, and have no worries!

We use cookies to give you the best experience possible. By continuing we’ll assume you board with our cookie policy.

In a short paper—even a research paper—you don’t need to provide an exhaustive summary as part of your conclusion. But you do need to make some kind of transition between your final body paragraph and your concluding paragraph. This may come in the form of a few sentences of summary. Or it may come in the form of a sentence that brings your readers back to your thesis or main idea and reminds your readers where you began and how far you have traveled.

So, for example, in a paper about the relationship between ADHD and rejection sensitivity, Vanessa Roser begins by introducing readers to the fact that researchers have studied the relationship between the two conditions and then provides her explanation of that relationship. Here’s her thesis: “While socialization may indeed be an important factor in RS, I argue that individuals with ADHD may also possess a neurological predisposition to RS that is exacerbated by the differing executive and emotional regulation characteristic of ADHD.”

In her final paragraph, Roser reminds us of where she started by echoing her thesis: “This literature demonstrates that, as with many other conditions, ADHD and RS share a delicately intertwined pattern of neurological similarities that is rooted in the innate biology of an individual’s mind, a connection that cannot be explained in full by the behavioral mediation hypothesis.”  

Highlight the “so what”  

At the beginning of your paper, you explain to your readers what’s at stake—why they should care about the argument you’re making. In your conclusion, you can bring readers back to those stakes by reminding them why your argument is important in the first place. You can also draft a few sentences that put those stakes into a new or broader context.

In the conclusion to her paper about ADHD and RS, Roser echoes the stakes she established in her introduction—that research into connections between ADHD and RS has led to contradictory results, raising questions about the “behavioral mediation hypothesis.”

She writes, “as with many other conditions, ADHD and RS share a delicately intertwined pattern of neurological similarities that is rooted in the innate biology of an individual’s mind, a connection that cannot be explained in full by the behavioral mediation hypothesis.”  

Leave your readers with the “now what”  

After the “what” and the “so what,” you should leave your reader with some final thoughts. If you have written a strong introduction, your readers will know why you have been arguing what you have been arguing—and why they should care. And if you’ve made a good case for your thesis, then your readers should be in a position to see things in a new way, understand new questions, or be ready for something that they weren’t ready for before they read your paper.

In her conclusion, Roser offers two “now what” statements. First, she explains that it is important to recognize that the flawed behavioral mediation hypothesis “seems to place a degree of fault on the individual. It implies that individuals with ADHD must have elicited such frequent or intense rejection by virtue of their inadequate social skills, erasing the possibility that they may simply possess a natural sensitivity to emotion.” She then highlights the broader implications for treatment of people with ADHD, noting that recognizing the actual connection between rejection sensitivity and ADHD “has profound implications for understanding how individuals with ADHD might best be treated in educational settings, by counselors, family, peers, or even society as a whole.”

To find your own “now what” for your essay’s conclusion, try asking yourself these questions:

• What can my readers now understand, see in a new light, or grapple with that they would not have understood in the same way before reading my paper? Are we a step closer to understanding a larger phenomenon or to understanding why what was at stake is so important?  
• What questions can I now raise that would not have made sense at the beginning of my paper? Questions for further research? Other ways that this topic could be approached?  
• Are there other applications for my research? Could my questions be asked about different data in a different context? Could I use my methods to answer a different question?  
• What action should be taken in light of this argument? What action do I predict will be taken or could lead to a solution?  
• What larger context might my argument be a part of?  

What to avoid in your conclusion  

• a complete restatement of all that you have said in your paper.  
• a substantial counterargument that you do not have space to refute; you should introduce counterarguments before your conclusion.  
• an apology for what you have not said. If you need to explain the scope of your paper, you should do this sooner—but don’t apologize for what you have not discussed in your paper.  
• fake transitions like “in conclusion” that are followed by sentences that aren’t actually conclusions. (“In conclusion, I have now demonstrated that my thesis is correct.”)
• picture_as_pdf Conclusions

How to Write a Conclusion for a Research Paper

• Posted on May 12, 2023

The key to an impactful research paper is crafting an effective conclusion. The conclusion provides a final opportunity to make a lasting impression on the reader by providing a powerful summary of the main argument and key findings.

A well-written conclusion not only summarizes your research but also ties everything back to your thesis statement. Plus, it provides important takeaways for your reader, highlighting what they should remember from your research and how it contributes to the larger academic discourse.

Crafting an impactful conclusion can be tricky, especially in argumentative papers. However, with our expert tips and tricks, you can rest assured that your conclusion will effectively restate the main argument and thesis statement in a way that resonates with your audience and elevates your research to new heights.

Why is a Conclusion Necessary for a Research Paper? 

The conclusion of a research paper is essential in tying together the different parts of the paper and offering a final perspective on the topic. It reinforces the main idea or argument presented and summarizes the key points and findings of the research, highlighting its significance. 

Additionally, the conclusion creates a full circle of the research by connecting back to the thesis statement presented at the paper’s beginning. It provides an opportunity to showcase the writer’s critical thinking skills by demonstrating how the research supports the main argument.

The conclusion is essential for a research paper because it provides closure for the reader. It serves as a final destination that helps the reader understand how all the different pieces of information fit together to support the main argument presented. It also offers insights into how the research can inform future studies and contribute to the larger academic discourse.

It also ensures that the reader does not get lost in the vast amount of information presented in the paper by providing a concise and coherent summary of the entire research. Additionally, it helps the reader identify the paper’s main takeaway and understand how the research contributes to the larger body of knowledge in the field.

Leave a Lasting Impression

A well-crafted conclusion is an essential element of any research paper. Its purpose is to leave a lasting impression on the reader and tie together the different parts of the paper.

To achieve this goal, a conclusion should summarize the main points and highlight the key findings of the research. By doing so, the reader can easily understand the focus and significance of the study.

A strong conclusion should also discuss any important findings that can be applied in the real world. This practical perspective gives readers a better sense of the impact and relevance of the research.

Summarize Your Thoughts

The conclusion of a research paper should be concise and provide a summary of the writer’s thoughts and ideas about the research. 

It should go beyond simply restating the main points and findings and address the “so what” of the research by explaining how it contributes to the existing body of knowledge on the same topic. This way, the conclusion can give readers a better understanding of the research’s significance and relevance to the broader academic community.

Demonstrate How Important Your Idea Is

Moving beyond a superficial overview and delving into the research in-depth is crucial to create a compelling conclusion. This entails summarizing the key findings of the study, highlighting its main contributions to the field, and placing the results in a broader context. Additionally, it would help if you comprehensively analyzed your work and its implications, underscoring its value to the broader academic community. 

New Insights

The conclusion section of a research paper offers an opportunity for the writer to present new insights and approaches to addressing the research problem.

Whether the research outcome is positive or negative, the conclusion provides a platform to discuss practical implications beyond the scope of the research paper. This discussion can help readers understand the potential impact of the research on the broader field and its significance for future research endeavors.

How to Write a Killer Conclusion with Key Points

When writing a conclusion for a research paper, it is important to cover several key points to create a solid and effective conclusion.

Restate the Thesis

When crafting a conclusion, restating the thesis statement is an important step that reminds readers of the research paper’s central focus. However, it should not be a verbatim repetition of the introduction. 

By restating the thesis concisely and clearly, you can effectively tie together the main ideas discussed in the body of the paper and emphasize the significance of the research question. However, keep in mind that the restated thesis should capture the essence of the paper and leave the reader with a clear understanding of the main topic and its importance.

Summarize the Main Points

To write an impactful conclusion, summarizing the main points discussed in the body of the paper is essential. This final section provides the writer with a last opportunity to highlight the significance of their research findings. 

However, it is equally important to avoid reiterating information already discussed in the body of the paper. Instead, you should synthesize and summarize the most significant points to emphasize the key findings. By doing so, the conclusion can effectively tie together the research findings and provide a clear understanding of the importance of the research topic.

Discuss the Results or Findings

The next step is to discuss the results or findings of the research. The discussion of the results or findings should not simply be a repetition of the information presented in the body of the paper.

Instead, it should provide a more in-depth analysis of the significance of the findings. This can involve explaining why the findings are important, what they mean in the context of the research question, and how they contribute to the field or area of study. 

Additionally, it’s crucial to address any limitations or weaknesses of the study in this section. This can provide a more balanced and nuanced understanding of the research and its implications. By doing so, the reader will have a better understanding of the scope and context of the study, which can ultimately enhance the credibility and validity of the research.

Ruminate on Your Thoughts

The final step to crafting an effective conclusion is to ruminate on your thoughts. This provides an opportunity to reflect on the meaning of the research and leaves the reader with something to ponder. Remember, the concluding paragraph should not introduce new information but rather summarize and reflect on the critical points made in the paper.

Furthermore, the conclusion should be integrated into the paper rather than presented as a separate section. It should provide a concise overview of the main findings and suggest avenues for further research.

Different Types of Conclusions 

There are various types of conclusions that can be employed to conclude a research paper effectively, depending on the research questions and topic being investigated.

Summarizing

Summarizing conclusions are frequently used to wrap up a research paper effectively. They restate the thesis statement and provide a brief overview of the main findings and outcomes of the research. This type of conclusion serves as a reminder to the reader of the key points discussed throughout the paper and emphasizes the significance of the research topic.

To be effective, summarizing conclusions should be concise and to the point, avoiding any new information not previously discussed in the body of the paper. Moreover, they are particularly useful when there is a clear and direct answer to the research question. This allows you to summarize your findings succinctly and leave the reader with a clear understanding of the implications of the research.

Externalizing

On the opposite end of the spectrum are externalizing conclusions. Unlike summarizing conclusions, externalizing conclusions introduce new ideas that may not be directly related to the research findings. This type of conclusion can be beneficial because it broadens the scope of the research topic and can lead to new insights and directions for future research.

By presenting new ideas, externalizing conclusions can challenge conventional thinking in the field and open up new avenues for exploration. This approach is instrumental in fields where research is ongoing, and new ideas and approaches are constantly being developed.

Editorial conclusions are a type of conclusion that allows the writer to express their commentary on the research findings. They can be particularly effective in connecting the writer’s insights with the research conducted and can offer a unique perspective on the research topic. Adding a personal touch to the conclusion can help engage the reader and leave a lasting impression.

Remember that regardless of the type of conclusion you choose, it should always start with a clear and concise restatement of the thesis statement, followed by a summary of the main findings in the body paragraphs. The first sentence of the conclusion should be impactful and attention-grabbing to make a strong impression on the reader.

What to Avoid in Your Conclusion

When crafting your conclusion, it’s essential to keep in mind several key points to ensure that it is effective and well-received by your audience:

• Avoid introducing new ideas or topics that have not been covered in the body of your paper.
• Refrain from simply restating what has already been said in your paper without adding new insights or analysis.
• Do not apologize for any shortcomings or limitations of your research, as this can undermine the importance of your findings.
• Avoid using overly emotional or flowery language, as it can detract from the professionalism and objectivity of the research.
• Lastly, avoid any examples of plagiarism. Be sure to properly cite any sources you have used in your research and writing.

Example of a Bad Conclusion

• Recapitulation without Insight: In conclusion, this paper has discussed the importance of exercise for physical and mental health. We hope this paper has been helpful to you and encourages you to start exercising today.
• Introduction of New Ideas: In conclusion, we have discussed the benefits of exercise and how it can improve physical and mental health. Additionally, we have highlighted the benefits of a plant-based diet and the importance of getting enough sleep for overall well-being.
• Emotional Language: In conclusion, exercise is good for your body and mind, and you should definitely start working out today!

Example of a Good Conclusion

• Insights and Implications: In light of our investigation, it is evident that regular exercise is undeniably beneficial for both physical and mental well-being, especially if performed at an appropriate duration and frequency. These findings hold significant implications for public health policies and personal wellness decisions.
• Limitations and Future Directions: While our investigation has shed light on the benefits of exercise, our study is not without limitations. Future research can delve deeper into the long-term effects of exercise on mental health and explore the impact of exercise on specific populations, such as older adults or individuals with chronic health conditions.
• Call to Action: In conclusion, we urge individuals to prioritize exercise as a critical component of their daily routine. By making exercise a habit, we can reap the many benefits of a healthy and active lifestyle.

Final Thoughts 

When writing a research paper, the conclusion is one of the most crucial elements to leave a lasting impression on the reader. It should effectively summarize the research and provide valuable insights, leaving the reader with something to ponder.

To accomplish this, it is essential to include vital elements, such as restating the thesis , summarizing the main points, and discussing the findings. However, it is equally important to avoid common mistakes that can undermine the effectiveness of the conclusion, such as introducing new information or repeating the introduction. 

So to ensure that your research is of the highest quality, it’s crucial to use proper citations and conduct a thorough literature review. Additionally, it is crucial to proofread the work to eliminate any errors. 

Fortunately, there are many available resources to help you with both writing and plagiarism prevention. Quetext , for example, offers a plagiarism checker, citation assistance, and proofreading tools to ensure the writing is top-notch. By incorporating these tips and using available resources, you can create a compelling and memorable conclusion for readers. 

Sign Up for Quetext Today!

Click below to find a pricing plan that fits your needs.

You May Also Like

The Benefits of Peer Review: How to Give and Receive Constructive Feedback on Your Writing

• Posted on August 9, 2024

Teaching Students About Plagiarism: Strategies for Promoting Academic Integrity

• Posted on August 2, 2024

Encouraging Proper Citation Practices: Tips for Teaching Students How to Cite Sources Correctly and Ethically

• Posted on July 22, 2024

A Guide to Paraphrasing Poetry, With Examples

• Posted on July 12, 2024

Preparing Students for the Future: AI Literacy and Digital Citizenship

• Posted on July 5, 2024

How to Summarize a Paper, a Story, a Book, a Report or an Essay

• Posted on June 25, 2024 June 25, 2024

How to Use AI to Enhance Your Storytelling Process

• Posted on June 12, 2024

Essential Comma Rules for Business Emails

• Posted on June 7, 2024

Input your search keywords and press Enter.

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Write a Conclusion for a Research Paper

Last Updated: July 8, 2024 Approved

This article was co-authored by Christopher Taylor, PhD . Christopher Taylor is an Adjunct Assistant Professor of English at Austin Community College in Texas. He received his PhD in English Literature and Medieval Studies from the University of Texas at Austin in 2014. wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 43 testimonials and 83% of readers who voted found it helpful, earning it our reader-approved status. This article has been viewed 2,262,799 times.

The conclusion of a research paper needs to summarize the content and purpose of the paper without seeming too wooden or dry. Every basic conclusion must share several key elements, but there are also several tactics you can play around with to craft a more effective conclusion and several you should avoid to prevent yourself from weakening your paper's conclusion. Here are some writing tips to keep in mind when creating a conclusion for your next research paper.

Sample Conclusions

Writing a basic conclusion.

• Do not spend a great amount of time or space restating your topic.
• A good research paper will make the importance of your topic apparent, so you do not need to write an elaborate defense of your topic in the conclusion.
• Usually a single sentence is all you need to restate your topic.
• An example would be if you were writing a paper on the epidemiology of infectious disease, you might say something like "Tuberculosis is a widespread infectious disease that affects millions of people worldwide every year."
• Yet another example from the humanities would be a paper about the Italian Renaissance: "The Italian Renaissance was an explosion of art and ideas centered around artists, writers, and thinkers in Florence."

• A thesis is a narrowed, focused view on the topic at hand.
• This statement should be rephrased from the thesis you included in your introduction. It should not be identical or too similar to the sentence you originally used.
• Try re-wording your thesis statement in a way that complements your summary of the topic of your paper in your first sentence of your conclusion.
• An example of a good thesis statement, going back to the paper on tuberculosis, would be "Tuberculosis is a widespread disease that affects millions of people worldwide every year. Due to the alarming rate of the spread of tuberculosis, particularly in poor countries, medical professionals are implementing new strategies for the diagnosis, treatment, and containment of this disease ."

• A good way to go about this is to re-read the topic sentence of each major paragraph or section in the body of your paper.
• Find a way to briefly restate each point mentioned in each topic sentence in your conclusion. Do not repeat any of the supporting details used within your body paragraphs.
• Under most circumstances, you should avoid writing new information in your conclusion. This is especially true if the information is vital to the argument or research presented in your paper.
• For example, in the TB paper you could summarize the information. "Tuberculosis is a widespread disease that affects millions of people worldwide. Due to the alarming rate of the spread of tuberculosis, particularly in poor countries, medical professionals are implementing new strategies for the diagnosis, treatment, and containment of this disease. In developing countries, such as those in Africa and Southeast Asia, the rate of TB infections is soaring. Crowded conditions, poor sanitation, and lack of access to medical care are all compounding factors in the spread of the disease. Medical experts, such as those from the World Health Organization are now starting campaigns to go into communities in developing countries and provide diagnostic testing and treatments. However, the treatments for TB are very harsh and have many side effects. This leads to patient non-compliance and spread of multi-drug resistant strains of the disease."

• Note that this is not needed for all research papers.
• If you already fully explained what the points in your paper mean or why they are significant, you do not need to go into them in much detail in your conclusion. Simply restating your thesis or the significance of your topic should suffice.
• It is always best practice to address important issues and fully explain your points in the body of your paper. The point of a conclusion to a research paper is to summarize your argument for the reader and, perhaps, to call the reader to action if needed.

• Note that a call for action is not essential to all conclusions. A research paper on literary criticism, for instance, is less likely to need a call for action than a paper on the effect that television has on toddlers and young children.
• A paper that is more likely to call readers to action is one that addresses a public or scientific need. Let's go back to our example of tuberculosis. This is a very serious disease that is spreading quickly and with antibiotic-resistant forms.
• A call to action in this research paper would be a follow-up statement that might be along the lines of "Despite new efforts to diagnose and contain the disease, more research is needed to develop new antibiotics that will treat the most resistant strains of tuberculosis and ease the side effects of current treatments."

• For example, if you are writing a history paper, then you might discuss how the historical topic you discussed matters today. If you are writing about a foreign country, then you might use the conclusion to discuss how the information you shared may help readers understand their own country.

Making Your Conclusion as Effective as Possible

• Since this sort of conclusion is so basic, you must aim to synthesize the information rather than merely summarizing it.
• Instead of merely repeating things you already said, rephrase your thesis and supporting points in a way that ties them all together.
• By doing so, you make your research paper seem like a "complete thought" rather than a collection of random and vaguely related ideas.

• Ask a question in your introduction. In your conclusion, restate the question and provide a direct answer.
• Write an anecdote or story in your introduction but do not share the ending. Instead, write the conclusion to the anecdote in the conclusion of your paper.
• For example, if you wanted to get more creative and put a more humanistic spin on a paper on tuberculosis, you might start your introduction with a story about a person with the disease, and refer to that story in your conclusion. For example, you could say something like this before you re-state your thesis in your conclusion: "Patient X was unable to complete the treatment for tuberculosis due to severe side effects and unfortunately succumbed to the disease."
• Use the same concepts and images introduced in your introduction in your conclusion. The images may or may not appear at other points throughout the research paper.

• Include enough information about your topic to back the statement up but do not get too carried away with excess detail.
• If your research did not provide you with a clear-cut answer to a question posed in your thesis, do not be afraid to indicate as much.
• Restate your initial hypothesis and indicate whether you still believe it or if the research you performed has begun swaying your opinion.
• Indicate that an answer may still exist and that further research could shed more light on the topic at hand.

• This may not be appropriate for all types of research papers. Most research papers, such as one on effective treatment for diseases, will have the information to make the case for a particular argument already in the paper.
• A good example of a paper that might ask a question of the reader in the ending is one about a social issue, such as poverty or government policy.
• Ask a question that will directly get at the heart or purpose of the paper. This question is often the same question, or some version of it, that you may have started with when you began your research.
• Make sure that the question can be answered by the evidence presented in your paper.
• If desired you can briefly summarize the answer after stating the question. You could also leave the question hanging for the reader to answer, though.

• Even without a call to action, you can still make a recommendation to your reader.
• For instance, if you are writing about a topic like third-world poverty, you can various ways for the reader to assist in the problem without necessarily calling for more research.
• Another example would be, in a paper about treatment for drug-resistant tuberculosis, you could suggest donating to the World Health Organization or research foundations that are developing new treatments for the disease.

Avoiding Common Pitfalls

• These sayings usually sound stiff, unnatural, or trite when used in writing.
• Moreover, using a phrase like "in conclusion" to begin your conclusion is a little too straightforward and tends to lead to a weak conclusion. A strong conclusion can stand on its own without being labeled as such.

• Always state the main argument or thesis in the introduction. A research paper is an analytical discussion of an academic topic, not a mystery novel.
• A good, effective research paper will allow your reader to follow your main argument from start to finish.
• This is why it is best practice to start your paper with an introduction that states your main argument and to end the paper with a conclusion that re-states your thesis for re-iteration.

• All significant information should be introduced in the body of the paper.
• Supporting evidence expands the topic of your paper by making it appear more detailed. A conclusion should narrow the topic to a more general point.
• A conclusion should only summarize what you have already stated in the body of your paper.
• You may suggest further research or a call to action, but you should not bring in any new evidence or facts in the conclusion.

• Most often, a shift in tone occurs when a research paper with an academic tone gives an emotional or sentimental conclusion.
• Even if the topic of the paper is of personal significance for you, you should not indicate as much in your paper.
• If you want to give your paper a more humanistic slant, you could start and end your paper with a story or anecdote that would give your topic more personal meaning to the reader.
• This tone should be consistent throughout the paper, however.

• Apologetic statements include phrases like "I may not be an expert" or "This is only my opinion."
• Statements like this can usually be avoided by refraining from writing in the first-person.
• Avoid any statements in the first-person. First-person is generally considered to be informal and does not fit with the formal tone of a research paper.

Community Q&A

You Might Also Like

• ↑ http://owl.english.purdue.edu/owl/resource/724/04/
• ↑ http://www.crlsresearchguide.org/18_Writing_Conclusion.asp
• ↑ http://writing.wisc.edu/Handbook/PlanResearchPaper.html#conclusion
• ↑ http://writingcenter.unc.edu/handouts/conclusions/

About This Article

To write a conclusion for a research paper, start by restating your thesis statement to remind your readers what your main topic is and bring everything full circle. Then, briefly summarize all of the main points you made throughout your paper, which will help remind your readers of everything they learned. You might also want to include a call to action if you think more research or work needs to be done on your topic by writing something like, "Despite efforts to contain the disease, more research is needed to develop antibiotics." Finally, end your conclusion by explaining the broader context of your topic and why your readers should care about it, which will help them understand why your topic is relevant and important. For tips from our Academic co-author, like how to avoid common pitfalls when writing your conclusion, scroll down! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Ummay Aimen

Sep 30, 2016

Did this article help you?

Oct 22, 2017

Sally Larrin

Mar 17, 2018

Maya Loeven

Jun 4, 2017

Sep 26, 2016

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Don’t miss out! Sign up for

wikiHow’s newsletter

Home » Blog » How to Write a Conclusion for a Research Paper: A Step-by-Step Guide

How to Write a Conclusion for a Research Paper: A Step-by-Step Guide

Table of Contents

How to Write a Conclusion for a Research Paper

Many people don’t know this, but the conclusion of a research paper is where a lot of supervisors catch an idea of what was done in the research. In this article, we will talk about how to write a conclusion for a research paper and give you some tips on how to get started.

Conclusion is far from the hardest part of writing a research paper. However, that doesn’t mean it doesn’t present challenges, especially for those writing an academic paper for the first time. When you reach the conclusion, you are closer than ever to completing your work. It is the last part of the work, the one that brings a close to the analysis and discussions on a specific topic previously chosen.

However, many students find it difficult to start writing their conclusions. Much of this comes from the need to conclude something, that is, to provide a solution (even if provisional) to the problem investigated in the research. But getting to the conclusion of an academic work is not an animal with seven heads. In fact, it’s much easier than it sounds when we know exactly what is expected of completing a research paper.

What does the conclusion of a research paper consist of?

It doesn’t matter if you are writing an article, essay, monograph, dissertation, or thesis: these are all argumentative texts. In other words, it is a text that seeks to convince the reader about something and does so through theoretical foundations and data analysis. Thus, every academic work is an argumentative text and, therefore, must follow a basic structure of introduction, development, and conclusion. In other words, the text must present a subject and its problem, develop its points of interest and finalize it.

Thus, the conclusion is the final (and mandatory) part of an argumentative text. In it, the student recapitulates what was done throughout the work, returning to the initial objectives, hypothesis, paths, and main results found. In this way, it points out a solution to the investigated problem.

But for all of this, you don’t need a long, complex text. In fact, the conclusion is a short part of the text, especially when placed in comparison to the development and introduction. It is possible, for example, to conclude a good academic work in just one page.

How to write an effective conclusion for a research paper

Writing a conclusion for a research paper can be difficult for many researchers, especially those who are writing their first academic papers. However, with a few steps and tips, this task is much easier and faster to do. Check out some tips below.

1. First, reread your work

Before starting to write the conclusion, take the time to reread the entire work calmly and carefully. When rereading the work, you can highlight passages and excerpts, highlighting elements that cannot be missing from the conclusion.

Many researchers tend not to look at what they’ve done and end up simply patching the writing from conclusion to development. However, the conclusion is not a continuation of development. It has its own structure that also involves details that were exposed in the introduction. Therefore, this step is essential for you to be able to organize the information and assemble a consistent text for your conclusion.

 2. Do not copy and paste text from other parts of your work

It is true that the conclusion takes up several passages from the introduction and development of the work. However, this does not mean copying excerpts from other parts of the text and pasting them in the conclusion. It is important that your text is original and produces a synthesis of what has already been exposed and explained in other moments of the work.

Then, select excerpts and rewrite them, using other words and other sentence constructions to write new text for your conclusion. This process is known as paraphrase and is also used in indirect quotations.

3. Begin your conclusion by summarizing your research topic

When starting an academic work conclusion, it is very important to return to the research topic. Make a general presentation of the theme and problem investigated, contextualizing what was developed throughout the work. But it doesn’t need to be extended, as the intention is not to rewrite the work. Remember that you have already gone into this subject in depth in the introduction and development of the work! So, prefer to be clear and concise and present only the most important information, without making new questions and inquiries.

4. Then, confront your hypothesis and present your conclusion

As the name already makes clear, in the conclusion something must be concluded. Thus, it is important to look at what was established in the initial research proposal and compare its initial hypotheses with the results obtained and the analysis carried out. Did the results confirm or deny these hypotheses?

As well as the presentation of the theme, this part does not need to be extensive either. With the right words in well-crafted sentences, you can complete this part in one paragraph.

5. Present the main points of your argument

Now is the time to explain how you came to your conclusion. In other words, it is time to present the main points of your argument, as well as the results that support them.

Hence the importance of rereading the work before writing the conclusion. As much as the arguments are fresh in your head, reread and mark the main points so you don’t forget anything. This will make your conclusion even stronger and more complete!

When writing, don’t forget to summarize the information. After all, they have already appeared in detail during the development of your work. A long text at the conclusion can end up confusing the reader and hindering the understanding of your work!

6. Finally, make suggestions for future works that explore the same theme

The production of academic knowledge never ends. After all, one of the presuppositions of academic knowledge is that it has a provisional character. In other words, one of its characteristics is that it can be continuously tested, reformulated, and enriched. Thus, there is no academic work that exhausts a research topic. There will always be a possibility to expand the investigated problem or even see it from another point of view.

Therefore, finish your conclusion by pointing out questions that remained unanswered; interesting information that appeared in the collected data but could not be analyzed, as it was not part of the research focus; suggest applying the approach to other populations; or even a change in the approach to data collection and analysis, among others.

Final Thought

• Do not add any new information: the conclusion of your work should only revisit the course of your investigation, closing its cycle.
• Don’t delve into the details: this is a task for the work’s development text!
• Avoid lengthening the conclusion, prefer a text that is short and to the point.
• Don’t share personal thoughts unless you write a first-person opinion piece.

Writing a good conclusion for your academic work can even seem like a daunting task. But with clarity on what is expected of a conclusion, plus a clear structure and well-constructed sentences, you’ll find it’s not as difficult as it sounds.

If you like this article, see others like it:

Balancing Work and Life: Achieving Success in Nigeria’s Competitive Job Market

2024 complete nigeria current affairs pdf free download, 2024 nigeria current affairs quiz questions & answers, learn how to trade forex: a beginner’s guide, 5 corporate team building activities ideas for introverted employees, related topics, how to search for journals for a research project, a step-by-step guide to writing a comparative analysis, signs it’s time to re-evaluate your career goals, 5 common career change fears and what to do, how to plan an affordable vacation as a student.

• How to Order

Research Paper Guide

Research Paper Conclusion

Writing a Research Paper Conclusion - Step-by-Step Guide

People also read

Research Paper Writing - A Step by Step Guide

Research Paper Examples - Free Sample Papers for Different Formats!

Guide to Creating Effective Research Paper Outline

Interesting Research Paper Topics for 2024

Research Proposal Writing - A Step-by-Step Guide

How to Start a Research Paper - 7 Easy Steps

How to Write an Abstract for a Research Paper - A Step by Step Guide

Writing a Literature Review For a Research Paper - A Comprehensive Guide

Qualitative Research - Methods, Types, and Examples

8 Types of Qualitative Research - Overview & Examples

Qualitative vs Quantitative Research - Learning the Basics

200+ Engaging Psychology Research Paper Topics for Students in 2024

Learn How to Write a Hypothesis in a Research Paper: Examples and Tips!

20+ Types of Research With Examples - A Detailed Guide

Understanding Quantitative Research - Types & Data Collection Techniques

230+ Sociology Research Topics & Ideas for Students

How to Cite a Research Paper - A Complete Guide

Excellent History Research Paper Topics- 300+ Ideas

A Guide on Writing the Method Section of a Research Paper - Examples & Tips

How To Write an Introduction Paragraph For a Research Paper: Learn with Examples

Crafting a Winning Research Paper Title: A Complete Guide

Writing a Thesis For a Research Paper - A Comprehensive Guide

How To Write A Discussion For A Research Paper | Examples & Tips

How To Write The Results Section of A Research Paper | Steps & Examples

Writing a Problem Statement for a Research Paper - A Comprehensive Guide

Finding Sources For a Research Paper: A Complete Guide

A Guide on How to Edit a Research Paper

200+ Ethical Research Paper Topics to Begin With (2024)

300+ Controversial Research Paper Topics & Ideas - 2024 Edition

150+ Argumentative Research Paper Topics For You - 2024

How to Write a Research Methodology for a Research Paper

Finishing a research paper feels great, but getting to the end—especially the conclusion—can be a bit tricky. 

People often wonder, "How do I wrap up my findings nicely?" or "What tone should I use in the conclusion?" 

If you're dealing with these questions, you're not alone! Many researchers find writing a good conclusion a bit challenging since it's a crucial part that is meant to leave a strong impression on your readers.

No need to worry! 

In this guide, we'll show you how to write a conclusion that not only ties up your research paper neatly but also leaves a strong impression. We'll cover everything from summarizing effectively to creating the right feeling. 

So, let’s get started. 

• 1. What is a Research Paper Conclusion?
• 2. How to Write a Research Paper Conclusion: 7 Steps
• 3. Research Paper Conclusion Examples
• 4. Things to Avoid While Writing the Research Paper Conclusion

What is a Research Paper Conclusion?

A research paper conclusion is like the final chapter of your paper. It's where you bring everything together and leave a lasting impression on your readers. 

In simple terms, it's the last part where you sum up what you found during your research and explain why it matters. 

The conclusion isn't just a summary; it's a chance to make your research memorable and show its importance.

Types of Research Paper Conclusions

When it comes to writing the conclusion of your research paper, there isn't a one-size-fits-all approach. Different types of research papers call for different types of conclusions. Here are some common types:

• Summarizing Conclusion

This type recaps the key points and findings of your research. It's like giving your readers a quick overview of what you discovered without introducing new information. Summarizing conclusions works well for straightforward research papers.

• Reflective Conclusion

A reflective conclusion allows you to share your personal thoughts on the research process, challenges faced, and lessons learned. It adds a human touch to your paper, giving readers insight into your journey as a researcher.

• Open-ended Conclusion

Some research papers benefit from an open-ended conclusion that leaves room for further exploration. This type invites readers to think critically, ask questions, or even conduct additional research on the same topic.

How to Write a Research Paper Conclusion: 7 Steps

Writing an effective conclusion for your research paper involves more than just summarizing your findings. Follow these six essential steps to ensure your conclusion leaves a lasting impact:

Step 1: Restate the Research Problem

Start wrapping up your paper by going back to the main research question or issue you were investigating. 

Remind your readers about what you were trying to find out or understand. This gives your conclusion a clear connection to the original goal of your research, helping readers see the bigger picture.

Step 2: Revisit Your Thesis Statement

Go back to the main idea or argument you had in your paper—this is called your thesis statement. Double-check that your conclusion matches and supports what you wanted to prove or talk about in the beginning. 

This step is important because it keeps your conclusion connected to the main point of your research, making everything fit together nicely.

Step 3: Summarize Key Points

Give a short and clear recap of the most important things you found in your research. Keep it simple and stick to what you've already talked about—don't bring in new details now. 

The goal is to remind your readers of the important stuff you covered earlier. This helps to underline why your research is important and what you want them to take away from it.

Step 4: Discuss the Implications

Address the broader implications of your research. Explain why your findings matter and how they contribute to the existing body of knowledge in your field. 

Discuss the practical applications of your research and highlight any potential areas for further exploration.

Step 5: Connect with the Introduction

Create a seamless connection between your conclusion and the introduction. Referencing key elements from the introduction helps to create a cohesive narrative for your paper. 

This connection gives your research a sense of completeness and unity.

Step 6: Consider the "So What?" Factor

Ask yourself the question, "So what?" Why should readers care about your research? Clearly articulate the significance of your findings and their relevance to the broader academic or real-world context. 

Demonstrating the impact of your research adds depth to your conclusion.

Step 7: End with a Strong Closing Statement:

Conclude your research paper with a memorable closing statement. This could be a thought-provoking reflection, a call to action, or a suggestion for future research.

A strong closing leaves a lasting impression on your readers and emphasizes the importance of your work.

Research Paper Conclusion Examples

When it comes to writing a conclusion for your research paper, examining examples can offer valuable insights. Let’s take a look at this comprehensive example given below:

Still wondering how to write the conclusion for your research paper? Check out these examples for better understanding:

Conclusion For A Research Paper APA

Conclusion For A Research Paper Example Pdf

Conclusion For A Research Paper Pdf

Conclusion For A Research Paper Middle School

Conclusion For A Scientific Paper

Conclusion For A Research Paper Sample

Things to Avoid While Writing the Research Paper Conclusion

While crafting a conclusion for your research paper, it's crucial to steer clear of common pitfalls that can diminish the impact of your final remarks. 

Here are some things to avoid:

• Repetition: Avoid rehashing the exact language used in the introduction or body of your paper. A conclusion should summarize key points without duplicating content.
• Introducing New Information: Resist the temptation to introduce new ideas or data in the conclusion. This section is for summarizing existing content and reinforcing key findings.
• Overly Complex Language: Keep your conclusion clear and accessible. Avoid introducing overly complex or technical language that might confuse your readers.
• Lack of Connection to Introduction: Ensure that your conclusion ties back to the introduction. Failing to connect these sections can make your paper feel disjointed.
• Vague Statements: Steer clear of vague statements that lack substance. Clearly articulate the significance of your findings and their broader implications.
• Apologies or Excuses: Avoid including apologies or excuses for limitations in your research. While acknowledging limitations is important, the conclusion is not the place to dwell on them.
• New Arguments or Debates: The conclusion is not the space to introduce new debates or arguments. Keep the focus on summarizing your research and its implications.
• Abrupt Endings: A conclusion should not end abruptly. Instead, provide a thoughtful and well-rounded closing statement about the results of your study.

To sum it up, we've gone through important steps to make your research paper conclusion strong. We covered things like going back to your main question, talking about the most important points, and thinking about why your research matters in the real world.

Remember, a good ending is more than just a summary; it captures the heart of your research and answers the big "So what?" question. 

Remember, don't say the same things too much, don't add new details at the end, and keep your language simple!

If you ever need help with your academic writing, MyPerfectWords.com is here for you. Our expert writers are committed to helping you excel in your research papers and beyond. 

Take the next step towards academic success with MyPerfectWords.com, and hire our legit essay writing service  today!

Write Essay Within 60 Seconds!

Dr. Barbara is a highly experienced writer and author who holds a Ph.D. degree in public health from an Ivy League school. She has worked in the medical field for many years, conducting extensive research on various health topics. Her writing has been featured in several top-tier publications.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Conclusion

Published on September 6, 2022 by Tegan George and Shona McCombes. Revised on November 20, 2023.

The conclusion is the very last part of your thesis or dissertation . It should be concise and engaging, leaving your reader with a clear understanding of your main findings, as well as the answer to your research question .

In it, you should:

• Clearly state the answer to your main research question
• Summarize and reflect on your research process
• Make recommendations for future work on your thesis or dissertation topic
• Show what new knowledge you have contributed to your field
• Wrap up your thesis or dissertation

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Discussion vs. conclusion, how long should your conclusion be, step 1: answer your research question, step 2: summarize and reflect on your research, step 3: make future recommendations, step 4: emphasize your contributions to your field, step 5: wrap up your thesis or dissertation, full conclusion example, conclusion checklist, other interesting articles, frequently asked questions about conclusion sections.

While your conclusion contains similar elements to your discussion section , they are not the same thing.

Your conclusion should be shorter and more general than your discussion. Instead of repeating literature from your literature review , discussing specific research results , or interpreting your data in detail, concentrate on making broad statements that sum up the most important insights of your research.

As a rule of thumb, your conclusion should not introduce new data, interpretations, or arguments.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

Depending on whether you are writing a thesis or dissertation, your length will vary. Generally, a conclusion should make up around 5–7% of your overall word count.

An empirical scientific study will often have a short conclusion, concisely stating the main findings and recommendations for future research. A humanities dissertation topic or systematic review , on the other hand, might require more space to conclude its analysis, tying all the previous sections together in an overall argument.

Your conclusion should begin with the main question that your thesis or dissertation aimed to address. This is your final chance to show that you’ve done what you set out to do, so make sure to formulate a clear, concise answer.

• Don’t repeat a list of all the results that you already discussed
• Do synthesize them into a final takeaway that the reader will remember.

An empirical thesis or dissertation conclusion may begin like this:

A case study –based thesis or dissertation conclusion may begin like this:

In the second example, the research aim is not directly restated, but rather added implicitly to the statement. To avoid repeating yourself, it is helpful to reformulate your aims and questions into an overall statement of what you did and how you did it.

Your conclusion is an opportunity to remind your reader why you took the approach you did, what you expected to find, and how well the results matched your expectations.

To avoid repetition , consider writing more reflectively here, rather than just writing a summary of each preceding section. Consider mentioning the effectiveness of your methodology , or perhaps any new questions or unexpected insights that arose in the process.

You can also mention any limitations of your research, but only if you haven’t already included these in the discussion. Don’t dwell on them at length, though—focus on the positives of your work.

• While x limits the generalizability of the results, this approach provides new insight into y .
• This research clearly illustrates x , but it also raises the question of y .

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

You may already have made a few recommendations for future research in your discussion section, but the conclusion is a good place to elaborate and look ahead, considering the implications of your findings in both theoretical and practical terms.

• Based on these conclusions, practitioners should consider …
• To better understand the implications of these results, future studies could address …
• Further research is needed to determine the causes of/effects of/relationship between …

When making recommendations for further research, be sure not to undermine your own work. Relatedly, while future studies might confirm, build on, or enrich your conclusions, they shouldn’t be required for your argument to feel complete. Your work should stand alone on its own merits.

Just as you should avoid too much self-criticism, you should also avoid exaggerating the applicability of your research. If you’re making recommendations for policy, business, or other practical implementations, it’s generally best to frame them as “shoulds” rather than “musts.” All in all, the purpose of academic research is to inform, explain, and explore—not to demand.

Make sure your reader is left with a strong impression of what your research has contributed to the state of your field.

Some strategies to achieve this include:

• Returning to your problem statement to explain how your research helps solve the problem
• Referring back to the literature review and showing how you have addressed a gap in knowledge
• Discussing how your findings confirm or challenge an existing theory or assumption

Again, avoid simply repeating what you’ve already covered in the discussion in your conclusion. Instead, pick out the most important points and sum them up succinctly, situating your project in a broader context.

The end is near! Once you’ve finished writing your conclusion, it’s time to wrap up your thesis or dissertation with a few final steps:

• It’s a good idea to write your abstract next, while the research is still fresh in your mind.
• Next, make sure your reference list is complete and correctly formatted. To speed up the process, you can use our free APA citation generator .
• Once you’ve added any appendices , you can create a table of contents and title page .
• Finally, read through the whole document again to make sure your thesis is clearly written and free from language errors. You can proofread it yourself , ask a friend, or consider Scribbr’s proofreading and editing service .

Here is an example of how you can write your conclusion section. Notice how it includes everything mentioned above:

V. Conclusion

The current research aimed to identify acoustic speech characteristics which mark the beginning of an exacerbation in COPD patients.

The central questions for this research were as follows: 1. Which acoustic measures extracted from read speech differ between COPD speakers in stable condition and healthy speakers? 2. In what ways does the speech of COPD patients during an exacerbation differ from speech of COPD patients during stable periods?

All recordings were aligned using a script. Subsequently, they were manually annotated to indicate respiratory actions such as inhaling and exhaling. The recordings of 9 stable COPD patients reading aloud were then compared with the recordings of 5 healthy control subjects reading aloud. The results showed a significant effect of condition on the number of in- and exhalations per syllable, the number of non-linguistic in- and exhalations per syllable, and the ratio of voiced and silence intervals. The number of in- and exhalations per syllable and the number of non-linguistic in- and exhalations per syllable were higher for COPD patients than for healthy controls, which confirmed both hypotheses.

However, the higher ratio of voiced and silence intervals for COPD patients compared to healthy controls was not in line with the hypotheses. This unpredicted result might have been caused by the different reading materials or recording procedures for both groups, or by a difference in reading skills. Moreover, there was a trend regarding the effect of condition on the number of syllables per breath group. The number of syllables per breath group was higher for healthy controls than for COPD patients, which was in line with the hypothesis. There was no effect of condition on pitch, intensity, center of gravity, pitch variability, speaking rate, or articulation rate.

This research has shown that the speech of COPD patients in exacerbation differs from the speech of COPD patients in stable condition. This might have potential for the detection of exacerbations. However, sustained vowels rarely occur in spontaneous speech. Therefore, the last two outcome measures might have greater potential for the detection of beginning exacerbations, but further research on the different outcome measures and their potential for the detection of exacerbations is needed due to the limitations of the current study.

Checklist: Conclusion

I have clearly and concisely answered the main research question .

I have summarized my overall argument or key takeaways.

I have mentioned any important limitations of the research.

I have given relevant recommendations .

I have clearly explained what my research has contributed to my field.

I have  not introduced any new data or arguments.

You've written a great conclusion! Use the other checklists to further improve your dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. & McCombes, S. (2023, November 20). How to Write a Thesis or Dissertation Conclusion. Scribbr. Retrieved August 12, 2024, from https://www.scribbr.com/dissertation/write-conclusion/

Is this article helpful?

Tegan George

Other students also liked, how to write a discussion section | tips & examples, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Conclusions

What this handout is about.

This handout will explain the functions of conclusions, offer strategies for writing effective ones, help you evaluate conclusions you’ve drafted, and suggest approaches to avoid.

About conclusions

Introductions and conclusions can be difficult to write, but they’re worth investing time in. They can have a significant influence on a reader’s experience of your paper.

Just as your introduction acts as a bridge that transports your readers from their own lives into the “place” of your analysis, your conclusion can provide a bridge to help your readers make the transition back to their daily lives. Such a conclusion will help them see why all your analysis and information should matter to them after they put the paper down.

Your conclusion is your chance to have the last word on the subject. The conclusion allows you to have the final say on the issues you have raised in your paper, to synthesize your thoughts, to demonstrate the importance of your ideas, and to propel your reader to a new view of the subject. It is also your opportunity to make a good final impression and to end on a positive note.

Your conclusion can go beyond the confines of the assignment. The conclusion pushes beyond the boundaries of the prompt and allows you to consider broader issues, make new connections, and elaborate on the significance of your findings.

Your conclusion should make your readers glad they read your paper. Your conclusion gives your reader something to take away that will help them see things differently or appreciate your topic in personally relevant ways. It can suggest broader implications that will not only interest your reader, but also enrich your reader’s life in some way. It is your gift to the reader.

Strategies for writing an effective conclusion

One or more of the following strategies may help you write an effective conclusion:

• Play the “So What” Game. If you’re stuck and feel like your conclusion isn’t saying anything new or interesting, ask a friend to read it with you. Whenever you make a statement from your conclusion, ask the friend to say, “So what?” or “Why should anybody care?” Then ponder that question and answer it. Here’s how it might go: You: Basically, I’m just saying that education was important to Douglass. Friend: So what? You: Well, it was important because it was a key to him feeling like a free and equal citizen. Friend: Why should anybody care? You: That’s important because plantation owners tried to keep slaves from being educated so that they could maintain control. When Douglass obtained an education, he undermined that control personally. You can also use this strategy on your own, asking yourself “So What?” as you develop your ideas or your draft.
• Return to the theme or themes in the introduction. This strategy brings the reader full circle. For example, if you begin by describing a scenario, you can end with the same scenario as proof that your essay is helpful in creating a new understanding. You may also refer to the introductory paragraph by using key words or parallel concepts and images that you also used in the introduction.
• Synthesize, don’t summarize. Include a brief summary of the paper’s main points, but don’t simply repeat things that were in your paper. Instead, show your reader how the points you made and the support and examples you used fit together. Pull it all together.
• Include a provocative insight or quotation from the research or reading you did for your paper.
• Propose a course of action, a solution to an issue, or questions for further study. This can redirect your reader’s thought process and help them to apply your info and ideas to their own life or to see the broader implications.
• Point to broader implications. For example, if your paper examines the Greensboro sit-ins or another event in the Civil Rights Movement, you could point out its impact on the Civil Rights Movement as a whole. A paper about the style of writer Virginia Woolf could point to her influence on other writers or on later feminists.

Strategies to avoid

• Beginning with an unnecessary, overused phrase such as “in conclusion,” “in summary,” or “in closing.” Although these phrases can work in speeches, they come across as wooden and trite in writing.
• Stating the thesis for the very first time in the conclusion.
• Introducing a new idea or subtopic in your conclusion.
• Ending with a rephrased thesis statement without any substantive changes.
• Making sentimental, emotional appeals that are out of character with the rest of an analytical paper.
• Including evidence (quotations, statistics, etc.) that should be in the body of the paper.

Four kinds of ineffective conclusions

• The “That’s My Story and I’m Sticking to It” Conclusion. This conclusion just restates the thesis and is usually painfully short. It does not push the ideas forward. People write this kind of conclusion when they can’t think of anything else to say. Example: In conclusion, Frederick Douglass was, as we have seen, a pioneer in American education, proving that education was a major force for social change with regard to slavery.
• The “Sherlock Holmes” Conclusion. Sometimes writers will state the thesis for the very first time in the conclusion. You might be tempted to use this strategy if you don’t want to give everything away too early in your paper. You may think it would be more dramatic to keep the reader in the dark until the end and then “wow” them with your main idea, as in a Sherlock Holmes mystery. The reader, however, does not expect a mystery, but an analytical discussion of your topic in an academic style, with the main argument (thesis) stated up front. Example: (After a paper that lists numerous incidents from the book but never says what these incidents reveal about Douglass and his views on education): So, as the evidence above demonstrates, Douglass saw education as a way to undermine the slaveholders’ power and also an important step toward freedom.
• The “America the Beautiful”/”I Am Woman”/”We Shall Overcome” Conclusion. This kind of conclusion usually draws on emotion to make its appeal, but while this emotion and even sentimentality may be very heartfelt, it is usually out of character with the rest of an analytical paper. A more sophisticated commentary, rather than emotional praise, would be a more fitting tribute to the topic. Example: Because of the efforts of fine Americans like Frederick Douglass, countless others have seen the shining beacon of light that is education. His example was a torch that lit the way for others. Frederick Douglass was truly an American hero.
• The “Grab Bag” Conclusion. This kind of conclusion includes extra information that the writer found or thought of but couldn’t integrate into the main paper. You may find it hard to leave out details that you discovered after hours of research and thought, but adding random facts and bits of evidence at the end of an otherwise-well-organized essay can just create confusion. Example: In addition to being an educational pioneer, Frederick Douglass provides an interesting case study for masculinity in the American South. He also offers historians an interesting glimpse into slave resistance when he confronts Covey, the overseer. His relationships with female relatives reveal the importance of family in the slave community.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Douglass, Frederick. 1995. Narrative of the Life of Frederick Douglass, an American Slave, Written by Himself. New York: Dover.

Hamilton College. n.d. “Conclusions.” Writing Center. Accessed June 14, 2019. https://www.hamilton.edu//academics/centers/writing/writing-resources/conclusions .

Holewa, Randa. 2004. “Strategies for Writing a Conclusion.” LEO: Literacy Education Online. Last updated February 19, 2004. https://leo.stcloudstate.edu/acadwrite/conclude.html.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write a Research Paper Conclusion Section

What is a conclusion in a research paper?

The conclusion in a research paper is the final paragraph or two in a research paper. In scientific papers, the conclusion usually follows the Discussion section , summarizing the importance of the findings and reminding the reader why the work presented in the paper is relevant.

However, it can be a bit confusing to distinguish the conclusion section/paragraph from a summary or a repetition of your findings, your own opinion, or the statement of the implications of your work. In fact, the conclusion should contain a bit of all of these other parts but go beyond it—but not too far beyond! 

The structure and content of the conclusion section can also vary depending on whether you are writing a research manuscript or an essay. This article will explain how to write a good conclusion section, what exactly it should (and should not) contain, how it should be structured, and what you should avoid when writing it.  

Table of Contents:

What does a good conclusion section do, what to include in a research paper conclusion.

• Conclusion in an Essay
• Research Paper Conclusion 
• Conclusion Paragraph Outline and Example
• What Not to Do When Writing a Conclusion

The conclusion of a research paper has several key objectives. It should:

• Restate your research problem addressed in the introduction section
• Summarize your main arguments, important findings, and broader implications
• Synthesize key takeaways from your study

The specific content in the conclusion depends on whether your paper presents the results of original scientific research or constructs an argument through engagement with previously published sources.

You presented your general field of study to the reader in the introduction section, by moving from general information (the background of your work, often combined with a literature review ) to the rationale of your study and then to the specific problem or topic you addressed, formulated in the form of the statement of the problem in research or the thesis statement in an essay.

In the conclusion section, in contrast, your task is to move from your specific findings or arguments back to a more general depiction of how your research contributes to the readers’ understanding of a certain concept or helps solve a practical problem, or fills an important gap in the literature. The content of your conclusion section depends on the type of research you are doing and what type of paper you are writing. But whatever the outcome of your work is, the conclusion is where you briefly summarize it and place it within a larger context. It could be called the “take-home message” of the entire paper.

What to summarize in the conclusion

Your conclusion section needs to contain a very brief summary of your work , a very brief summary of the main findings of your work, and a mention of anything else that seems relevant when you now look at your work from a bigger perspective, even if it was not initially listed as one of your main research questions. This could be a limitation, for example, a problem with the design of your experiment that either needs to be considered when drawing any conclusions or that led you to ask a different question and therefore draw different conclusions at the end of your study (compared to when you started out).

Once you have reminded the reader of what you did and what you found, you need to go beyond that and also provide either your own opinion on why your work is relevant (and for whom, and how) or theoretical or practical implications of the study , or make a specific call for action if there is one to be made.   

How to Write an Essay Conclusion

Academic essays follow quite different structures than their counterparts in STEM and the natural sciences. Humanities papers often have conclusion sections that are much longer and contain more detail than scientific papers. There are three main types of academic essay conclusions.

Summarizing conclusion

The most typical conclusion at the end of an analytical/explanatory/argumentative essay is a summarizing conclusion . This is, as the name suggests, a clear summary of the main points of your topic and thesis. Since you might have gone through a number of different arguments or subtopics in the main part of your essay, you need to remind the reader again what those were, how they fit into each other, and how they helped you develop or corroborate your hypothesis.

For an essay that analyzes how recruiters can hire the best candidates in the shortest time or on “how starving yourself will increase your lifespan, according to science”, a summary of all the points you discussed might be all you need. Note that you should not exactly repeat what you said earlier, but rather highlight the essential details and present those to your reader in a different way. 

Externalizing conclusion

If you think that just reminding the reader of your main points is not enough, you can opt for an externalizing conclusion instead, that presents new points that were not presented in the paper so far. These new points can be additional facts and information or they can be ideas that are relevant to the topic and have not been mentioned before.

Such a conclusion can stimulate your readers to think about your topic or the implications of your analysis in a whole new way. For example, at the end of a historical analysis of a specific event or development, you could direct your reader’s attention to some current events that were not the topic of your essay but that provide a different context for your findings.

Editorial conclusion

In an editorial conclusion , another common type of conclusion that you will find at the end of papers and essays, you do not add new information but instead present your own experiences or opinions on the topic to round everything up. What makes this type of conclusion interesting is that you can choose to agree or disagree with the information you presented in your paper so far. For example, if you have collected and analyzed information on how a specific diet helps people lose weight, you can nevertheless have your doubts on the sustainability of that diet or its practicability in real life—if such arguments were not included in your original thesis and have therefore not been covered in the main part of your paper, the conclusion section is the place where you can get your opinion across.    

How to Conclude an Empirical Research Paper

An empirical research paper is usually more concise and succinct than an essay, because, if it is written well, it focuses on one specific question, describes the method that was used to answer that one question, describes and explains the results, and guides the reader in a logical way from the introduction to the discussion without going on tangents or digging into not absolutely relevant topics.

Summarize the findings

In a scientific paper, you should include a summary of the findings. Don’t go into great detail here (you will have presented your in-depth  results  and  discussion  already), but do clearly express the answers to the  research questions  you investigated.

Describe your main findings, even if they weren’t necessarily the ones anticipated, and explain the conclusion they led you to. Explain these findings in as few words as possible.

Instead of beginning with “ In conclusion, in this study, we investigated the effect of stress on the brain using fMRI …”, you should try to find a way to incorporate the repetition of the essential (and only the essential) details into the summary of the key points. “ The findings of this fMRI study on the effect of stress on the brain suggest that …” or “ While it has been known for a long time that stress has an effect on the brain, the findings of this fMRI study show that, surprisingly… ” would be better ways to start a conclusion. 

You should also not bring up new ideas or present new facts in the conclusion of a research paper, but stick to the background information you have presented earlier, to the findings you have already discussed, and the limitations and implications you have already described. The one thing you can add here is a practical recommendation that you haven’t clearly stated before—but even that one needs to follow logically from everything you have already discussed in the discussion section.

Discuss the implications

After summing up your key arguments or findings, conclude the paper by stating the broader implications of the research , whether in methods , approach, or findings. Express practical or theoretical takeaways from your paper. This often looks like a “call to action” or a final “sales pitch” that puts an exclamation point on your paper.

If your research topic is more theoretical in nature, your closing statement should express the significance of your argument—for example, in proposing a new understanding of a topic or laying the groundwork for future research.

Future research example

Future research into education standards should focus on establishing a more detailed picture of how novel pedagogical approaches impact young people’s ability to absorb new and difficult concepts. Moreover, observational studies are needed to gain more insight into how specific teaching models affect the retention of relationships and facts—for instance, how inquiry-based learning and its emphasis on lateral thinking can be used as a jumping-off point for more holistic classroom approaches.

Research Conclusion Example and Outline

Let’s revisit the study on the effect of stress on the brain we mentioned before and see what the common structure for a conclusion paragraph looks like, in three steps. Following these simple steps will make it easy for you to wrap everything up in one short paragraph that contains all the essential information: 

One: Short summary of what you did, but integrated into the summary of your findings:

While it has been known for a long time that stress has an effect on the brain, the findings of this fMRI study in 25 university students going through mid-term exams show that, surprisingly, one’s attitude to the experienced stress significantly modulates the brain’s response to it. 

Note that you don’t need to repeat any methodological or technical details here—the reader has been presented with all of these before, they have read your results section and the discussion of your results, and even (hopefully!) a discussion of the limitations and strengths of your paper. The only thing you need to remind them of here is the essential outcome of your work. 

Two: Add implications, and don’t forget to specify who this might be relevant for: 

Students could be considered a specific subsample of the general population, but earlier research shows that the effect that exam stress has on their physical and mental health is comparable to the effects of other types of stress on individuals of other ages and occupations. Further research into practical ways of modulating not only one’s mental stress response but potentially also one’s brain activity (e.g., via neurofeedback training) are warranted.

This is a “research implication”, and it is nicely combined with a mention of a potential limitation of the study (the student sample) that turns out not to be a limitation after all (because earlier research suggests we can generalize to other populations). If there already is a lot of research on neurofeedback for stress control, by the way, then this should have been discussed in your discussion section earlier and you wouldn’t say such studies are “warranted” here but rather specify how your findings could inspire specific future experiments or how they should be implemented in existing applications. 

Three: The most important thing is that your conclusion paragraph accurately reflects the content of your paper. Compare it to your research paper title , your research paper abstract , and to your journal submission cover letter , in case you already have one—if these do not all tell the same story, then you need to go back to your paper, start again from the introduction section, and find out where you lost the logical thread. As always, consistency is key.    

Problems to Avoid When Writing a Conclusion 

• Do not suddenly introduce new information that has never been mentioned before (unless you are writing an essay and opting for an externalizing conclusion, see above). The conclusion section is not where you want to surprise your readers, but the take-home message of what you have already presented.
• Do not simply copy your abstract, the conclusion section of your abstract, or the first sentence of your introduction, and put it at the end of the discussion section. Even if these parts of your paper cover the same points, they should not be identical.
• Do not start the conclusion with “In conclusion”. If it has its own section heading, that is redundant, and if it is the last paragraph of the discussion section, it is inelegant and also not really necessary. The reader expects you to wrap your work up in the last paragraph, so you don’t have to announce that. Just look at the above example to see how to start a conclusion in a natural way.
• Do not forget what your research objectives were and how you initially formulated the statement of the problem in your introduction section. If your story/approach/conclusions changed because of methodological issues or information you were not aware of when you started, then make sure you go back to the beginning and adapt your entire story (not just the ending). 

Consider Receiving Academic Editing Services

When you have arrived at the conclusion of your paper, you might want to head over to Wordvice AI’s AI Writing Assistant to receive a free grammar check for any academic content. 

After drafting, you can also receive English editing and proofreading services , including paper editing services for your journal manuscript. If you need advice on how to write the other parts of your research paper , or on how to make a research paper outline if you are struggling with putting everything you did together, then head over to the Wordvice academic resources pages , where we have a lot more articles and videos for you.

Topic Guide - Developing Your Research Study

• Purpose of Guide
• Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• APA 7th Edition
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• What Is Scholarly vs. Popular?
• Qualitative Methods
• Quantitative Methods
• Using Non-Textual Elements
• Limitations of the Study

Importance of a Good Conclusion

Structure and writing style, writing tip, another writing tip.

• 10. Proofreading Your Paper
• Writing Concisely
• Common Grammar Mistakes
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Annotated Bibliography
• Types of Structured Group Activities
• Group Project Survival Skills
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Study
• Writing a Research Proposal
• Bibliography

The conclusion is intended to help the reader understand why your research should matter to them after they have finished reading the paper. A conclusion is not merely a summary of the main topics covered or a re-statement of your research problem, but a synthesis of key points and, if applicable, where you recommend new areas for future research. For most college-level research papers, one or two well-developed paragraphs is sufficient for a conclusion, although in some cases, three or more paragraphs may be required.

Conclusions . The Writing Center. University of North Carolina; Conclusions . The Writing Lab and The OWL. Purdue University.

A well-written conclusion provides you with important opportunities to demonstrate to the reader your understanding of the research problem. These include:

• Presenting the last word on the issues you raised in your paper . Just as the introduction gives a first impression to your reader, the conclusion offers a chance to leave a lasting impression. Do this, for example, by highlighting key findings in your analysis or result section or by noting important or unexpected implications applied to practice.
• Summarizing your thoughts and conveying the larger significance of your study . The conclusion is an opportunity to succinctly answer [or in some cases, to re-emphasize]  the "So What?" question by placing the study within the context of how your research advances past research about the topic.
• Identifying how a gap in the literature has been addressed . The conclusion can be where you describe how a previously identified gap in the literature [described in your literature review section] has been filled by your research.
• Demonstrating the importance of your ideas . Don't be shy. The conclusion offers you the opportunity to elaborate on the impact and significance of your findings.
• Introducing possible new or expanded ways of thinking about the research problem . This does not refer to introducing new information [which should be avoided], but to offer new insight and creative approaches for framing or contextualizing the research problem based on the results of your study.

Bunton, David. “The Structure of PhD Conclusion Chapters.” Journal of English for Academic Purposes 4 (July 2005): 207–224; Conclusions . The Writing Center. University of North Carolina; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion . San Francisco Edit, 2003-2008; Conclusions . The Writing Lab and The OWL. Purdue University.

I.  General Rules

The function of your paper's conclusion is to restate the main argument . It reminds the reader of the strengths of your main argument(s) and reiterates the most important evidence supporting those argument(s). Do this by stating clearly the context, background, and necessity of pursuing the research problem you investigated in relation to an issue, controversy, or a gap found in the literature. Make sure, however, that your conclusion is not simply a repetitive summary of the findings. This reduces the impact of the argument(s) you have developed in your essay.

When writing the conclusion to your paper, follow these general rules:

• State your conclusions in clear, simple language. Re-state the purpose of your study then state how your findings differ or support those of other studies and why [i.e., what were the unique or new contributions your study made to the overall research about your topic?].
• Do not simply reiterate your results or the discussion of your results. Provide a synthesis of arguments presented in the paper to show how these converge to address the research problem and the overall objectives of your study
• Indicate opportunities for future research if you haven't already done so in the discussion section of your paper. Highlighting the need for further research provides the reader with evidence that you have an in-depth awareness of the research problem.

Consider the following points to help ensure your conclusion is presented well:

• If the argument or purpose of your paper is complex, you may need to summarize the argument for your reader.
• If, prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the end of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration that returns the topic to the context provided by the introduction or within a new context that emerges from the data.

The conclusion also provides a place for you to persuasively and succinctly restate your research problem, given that the reader has now been presented with all the information about the topic . Depending on the discipline you are writing in, the concluding paragraph may contain your reflections on the evidence presented, or on the essay's central research problem. However, the nature of being introspective about the research you have done will depend on the topic and whether your professor wants you to express your observations in this way.

NOTE : If asked to think introspectively about the topics, do not delve into idle speculation. Being introspective means looking within yourself as an author to try and understand an issue more deeply, not to guess at possible outcomes or make up scenarios not supported by evidence.

II.  Developing a Compelling Conclusion

Although an effective conclusion needs to be clear and succinct, it does not need to be written passively or lack a compelling narrative. Strategies to help you move beyond merely summarizing the key points of your research paper may include any of the following strategies:

• If your essay deals with a contemporary problem, warn readers of the possible consequences of not attending to the problem.
• Recommend a specific course or courses of action that, if adopted, could address a specific problem in practice or in the development of new knowledge.
• Cite a relevant quotation or expert opinion already noted in your paper in order to lend authority to the conclusion you have reached [a good place to look is research from your literature review].
• Explain the consequences of your research in a way that elicits action or demonstrates urgency in seeking change.
• Restate a key statistic, fact, or visual image to emphasize the ultimate point of your paper.
• If your discipline encourages personal reflection, illustrate your concluding point with a relevant narrative drawn from your own life experiences.
• Return to an anecdote, an example, or a quotation that you presented in your introduction, but add further insight derived from the findings of your study; use your interpretation of results to recast it in new or important ways.
• Provide a "take-home" message in the form of a strong, succinct statement that you want the reader to remember about your study.

III. Problems to Avoid

Failure to be concise Your conclusion section should be concise and to the point. Conclusions that are too lengthy often have unnecessary information in them. The conclusion is not the place for details about your methodology or results. Although you should give a summary of what was learned from your research, this summary should be relatively brief, since the emphasis in the conclusion is on the implications, evaluations, insights, and other forms of analysis that you make. Strategies for writing concisely can be found here .

Failure to comment on larger, more significant issues In the introduction, your task was to move from the general [the field of study] to the specific [the research problem]. However, in the conclusion, your task is to move from a specific discussion [your research problem] back to a general discussion [i.e., how your research contributes new understanding or fills an important gap in the literature]. In short, the conclusion is where you should place your research within a larger context [visualize your paper as an hourglass--start with a broad introduction and review of the literature, move to the specific analysis and discussion, conclude with a broad summary of the study's implications and significance].

Failure to reveal problems and negative results Negative aspects of the research process should never be ignored. Problems, drawbacks, and challenges encountered during your study should be summarized as a way of qualifying your overall conclusions. If you encountered negative or unintended results [i.e., findings that are validated outside the research context in which they were generated], you must report them in the results section and discuss their implications in the discussion section of your paper. In the conclusion, use your summary of the negative results as an opportunity to explain their possible significance and/or how they may form the basis for future research.

Failure to provide a clear summary of what was learned In order to be able to discuss how your research fits back into your field of study [and possibly the world at large], you need to summarize briefly and succinctly how it contributes to new knowledge or a new understanding about the research problem. This element of your conclusion may be only a few sentences long.

Failure to match the objectives of your research Often research objectives in the social sciences change while the research is being carried out. This is not a problem unless you forget to go back and refine the original objectives in your introduction. As these changes emerge they must be documented so that they accurately reflect what you were trying to accomplish in your research [not what you thought you might accomplish when you began].

Resist the urge to apologize If you've immersed yourself in studying the research problem, you presumably should know a good deal about it [perhaps even more than your professor!]. Nevertheless, by the time you have finished writing, you may be having some doubts about what you have produced. Repress those doubts! Don't undermine your authority by saying something like, "This is just one approach to examining this problem; there may be other, much better approaches that...." The overall tone of your conclusion should convey confidence to the reader.

Assan, Joseph. Writing the Conclusion Chapter: The Good, the Bad and the Missing . Department of Geography, University of Liverpool; Concluding Paragraphs . College Writing Center at Meramec. St. Louis Community College; Conclusions . The Writing Center. University of North Carolina; Conclusions . The Writing Lab and The OWL. Purdue University; Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions . The Lab Report. University College Writing Centre. University of Toronto; Leibensperger, Summer. Draft Your Conclusion . Academic Center, the University of Houston-Victoria, 2003; Make Your Last Words Count . The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Tips for Writing a Good Conclusion . Writing@CSU. Colorado State University; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion . San Francisco Edit, 2003-2008; Writing Conclusions . Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Writing: Considering Structure and Organization . Institute for Writing Rhetoric. Dartmouth College.

Don't Belabor the Obvious!

Avoid phrases like "in conclusion...," "in summary...," or "in closing...." These phrases can be useful, even welcome, in oral presentations. But readers can see by the tell-tale section heading and number of pages remaining to read, when an essay is about to end. You'll irritate your readers if you belabor the obvious.

New Insight, Not New Information!

Don't surprise the reader with new information in your conclusion that was never referenced anywhere else in the paper. If you have new information to present, add it to the discussion or other appropriate section of the paper. Note that, although no actual new information is introduced, the conclusion, along with the discussion section, is where you offer your most "original" contributions in the paper; the conclusion is where you describe the value of your research, demonstrate that you understand the material that you’ve presented, and locate your findings within the larger context of scholarship on the topic, including describing how your research contributes new insights or value to that scholarship.

Assan, Joseph. Writing the Conclusion Chapter: The Good, the Bad and the Missing . Department of Geography, University of Liverpool; Conclusions . The Writing Center. University of North Carolina.

• << Previous: Limitations of the Study
• Next: Appendices >>
• Last Updated: Mar 22, 2022 8:49 AM
• URL: https://leeuniversity.libguides.com/research_study_guide

Choose Your Test

• Search Blogs By Category
• College Admissions
• AP and IB Exams
• GPA and Coursework

113 Great Research Paper Topics

General Education

One of the hardest parts of writing a research paper can be just finding a good topic to write about. Fortunately we've done the hard work for you and have compiled a list of 113 interesting research paper topics. They've been organized into ten categories and cover a wide range of subjects so you can easily find the best topic for you.

In addition to the list of good research topics, we've included advice on what makes a good research paper topic and how you can use your topic to start writing a great paper.

What Makes a Good Research Paper Topic?

Not all research paper topics are created equal, and you want to make sure you choose a great topic before you start writing. Below are the three most important factors to consider to make sure you choose the best research paper topics.

#1: It's Something You're Interested In

A paper is always easier to write if you're interested in the topic, and you'll be more motivated to do in-depth research and write a paper that really covers the entire subject. Even if a certain research paper topic is getting a lot of buzz right now or other people seem interested in writing about it, don't feel tempted to make it your topic unless you genuinely have some sort of interest in it as well.

#2: There's Enough Information to Write a Paper

Even if you come up with the absolute best research paper topic and you're so excited to write about it, you won't be able to produce a good paper if there isn't enough research about the topic. This can happen for very specific or specialized topics, as well as topics that are too new to have enough research done on them at the moment. Easy research paper topics will always be topics with enough information to write a full-length paper.

Trying to write a research paper on a topic that doesn't have much research on it is incredibly hard, so before you decide on a topic, do a bit of preliminary searching and make sure you'll have all the information you need to write your paper.

#3: It Fits Your Teacher's Guidelines

Don't get so carried away looking at lists of research paper topics that you forget any requirements or restrictions your teacher may have put on research topic ideas. If you're writing a research paper on a health-related topic, deciding to write about the impact of rap on the music scene probably won't be allowed, but there may be some sort of leeway. For example, if you're really interested in current events but your teacher wants you to write a research paper on a history topic, you may be able to choose a topic that fits both categories, like exploring the relationship between the US and North Korea. No matter what, always get your research paper topic approved by your teacher first before you begin writing.

113 Good Research Paper Topics

Below are 113 good research topics to help you get you started on your paper. We've organized them into ten categories to make it easier to find the type of research paper topics you're looking for.

Arts/Culture

• Discuss the main differences in art from the Italian Renaissance and the Northern Renaissance .
• Analyze the impact a famous artist had on the world.
• How is sexism portrayed in different types of media (music, film, video games, etc.)? Has the amount/type of sexism changed over the years?
• How has the music of slaves brought over from Africa shaped modern American music?
• How has rap music evolved in the past decade?
• How has the portrayal of minorities in the media changed?

Current Events

• What have been the impacts of China's one child policy?
• How have the goals of feminists changed over the decades?
• How has the Trump presidency changed international relations?
• Analyze the history of the relationship between the United States and North Korea.
• What factors contributed to the current decline in the rate of unemployment?
• What have been the impacts of states which have increased their minimum wage?
• How do US immigration laws compare to immigration laws of other countries?
• How have the US's immigration laws changed in the past few years/decades?
• How has the Black Lives Matter movement affected discussions and view about racism in the US?
• What impact has the Affordable Care Act had on healthcare in the US?
• What factors contributed to the UK deciding to leave the EU (Brexit)?
• What factors contributed to China becoming an economic power?
• Discuss the history of Bitcoin or other cryptocurrencies  (some of which tokenize the S&P 500 Index on the blockchain) .
• Do students in schools that eliminate grades do better in college and their careers?
• Do students from wealthier backgrounds score higher on standardized tests?
• Do students who receive free meals at school get higher grades compared to when they weren't receiving a free meal?
• Do students who attend charter schools score higher on standardized tests than students in public schools?
• Do students learn better in same-sex classrooms?
• How does giving each student access to an iPad or laptop affect their studies?
• What are the benefits and drawbacks of the Montessori Method ?
• Do children who attend preschool do better in school later on?
• What was the impact of the No Child Left Behind act?
• How does the US education system compare to education systems in other countries?
• What impact does mandatory physical education classes have on students' health?
• Which methods are most effective at reducing bullying in schools?
• Do homeschoolers who attend college do as well as students who attended traditional schools?
• Does offering tenure increase or decrease quality of teaching?
• How does college debt affect future life choices of students?
• Should graduate students be able to form unions?

• What are different ways to lower gun-related deaths in the US?
• How and why have divorce rates changed over time?
• Is affirmative action still necessary in education and/or the workplace?
• Should physician-assisted suicide be legal?
• How has stem cell research impacted the medical field?
• How can human trafficking be reduced in the United States/world?
• Should people be able to donate organs in exchange for money?
• Which types of juvenile punishment have proven most effective at preventing future crimes?
• Has the increase in US airport security made passengers safer?
• Analyze the immigration policies of certain countries and how they are similar and different from one another.
• Several states have legalized recreational marijuana. What positive and negative impacts have they experienced as a result?
• Do tariffs increase the number of domestic jobs?
• Which prison reforms have proven most effective?
• Should governments be able to censor certain information on the internet?
• Which methods/programs have been most effective at reducing teen pregnancy?
• What are the benefits and drawbacks of the Keto diet?
• How effective are different exercise regimes for losing weight and maintaining weight loss?
• How do the healthcare plans of various countries differ from each other?
• What are the most effective ways to treat depression ?
• What are the pros and cons of genetically modified foods?
• Which methods are most effective for improving memory?
• What can be done to lower healthcare costs in the US?
• What factors contributed to the current opioid crisis?
• Analyze the history and impact of the HIV/AIDS epidemic .
• Are low-carbohydrate or low-fat diets more effective for weight loss?
• How much exercise should the average adult be getting each week?
• Which methods are most effective to get parents to vaccinate their children?
• What are the pros and cons of clean needle programs?
• How does stress affect the body?
• Discuss the history of the conflict between Israel and the Palestinians.
• What were the causes and effects of the Salem Witch Trials?
• Who was responsible for the Iran-Contra situation?
• How has New Orleans and the government's response to natural disasters changed since Hurricane Katrina?
• What events led to the fall of the Roman Empire?
• What were the impacts of British rule in India ?
• Was the atomic bombing of Hiroshima and Nagasaki necessary?
• What were the successes and failures of the women's suffrage movement in the United States?
• What were the causes of the Civil War?
• How did Abraham Lincoln's assassination impact the country and reconstruction after the Civil War?
• Which factors contributed to the colonies winning the American Revolution?
• What caused Hitler's rise to power?
• Discuss how a specific invention impacted history.
• What led to Cleopatra's fall as ruler of Egypt?
• How has Japan changed and evolved over the centuries?
• What were the causes of the Rwandan genocide ?

• Why did Martin Luther decide to split with the Catholic Church?
• Analyze the history and impact of a well-known cult (Jonestown, Manson family, etc.)
• How did the sexual abuse scandal impact how people view the Catholic Church?
• How has the Catholic church's power changed over the past decades/centuries?
• What are the causes behind the rise in atheism/ agnosticism in the United States?
• What were the influences in Siddhartha's life resulted in him becoming the Buddha?
• How has media portrayal of Islam/Muslims changed since September 11th?

Science/Environment

• How has the earth's climate changed in the past few decades?
• How has the use and elimination of DDT affected bird populations in the US?
• Analyze how the number and severity of natural disasters have increased in the past few decades.
• Analyze deforestation rates in a certain area or globally over a period of time.
• How have past oil spills changed regulations and cleanup methods?
• How has the Flint water crisis changed water regulation safety?
• What are the pros and cons of fracking?
• What impact has the Paris Climate Agreement had so far?
• What have NASA's biggest successes and failures been?
• How can we improve access to clean water around the world?
• Does ecotourism actually have a positive impact on the environment?
• Should the US rely on nuclear energy more?
• What can be done to save amphibian species currently at risk of extinction?
• What impact has climate change had on coral reefs?
• How are black holes created?
• Are teens who spend more time on social media more likely to suffer anxiety and/or depression?
• How will the loss of net neutrality affect internet users?
• Analyze the history and progress of self-driving vehicles.
• How has the use of drones changed surveillance and warfare methods?
• Has social media made people more or less connected?
• What progress has currently been made with artificial intelligence ?
• Do smartphones increase or decrease workplace productivity?
• What are the most effective ways to use technology in the classroom?
• How is Google search affecting our intelligence?
• When is the best age for a child to begin owning a smartphone?
• Has frequent texting reduced teen literacy rates?

How to Write a Great Research Paper

Even great research paper topics won't give you a great research paper if you don't hone your topic before and during the writing process. Follow these three tips to turn good research paper topics into great papers.

#1: Figure Out Your Thesis Early

Before you start writing a single word of your paper, you first need to know what your thesis will be. Your thesis is a statement that explains what you intend to prove/show in your paper. Every sentence in your research paper will relate back to your thesis, so you don't want to start writing without it!

As some examples, if you're writing a research paper on if students learn better in same-sex classrooms, your thesis might be "Research has shown that elementary-age students in same-sex classrooms score higher on standardized tests and report feeling more comfortable in the classroom."

If you're writing a paper on the causes of the Civil War, your thesis might be "While the dispute between the North and South over slavery is the most well-known cause of the Civil War, other key causes include differences in the economies of the North and South, states' rights, and territorial expansion."

#2: Back Every Statement Up With Research

Remember, this is a research paper you're writing, so you'll need to use lots of research to make your points. Every statement you give must be backed up with research, properly cited the way your teacher requested. You're allowed to include opinions of your own, but they must also be supported by the research you give.

#3: Do Your Research Before You Begin Writing

You don't want to start writing your research paper and then learn that there isn't enough research to back up the points you're making, or, even worse, that the research contradicts the points you're trying to make!

Get most of your research on your good research topics done before you begin writing. Then use the research you've collected to create a rough outline of what your paper will cover and the key points you're going to make. This will help keep your paper clear and organized, and it'll ensure you have enough research to produce a strong paper.

What's Next?

Are you also learning about dynamic equilibrium in your science class? We break this sometimes tricky concept down so it's easy to understand in our complete guide to dynamic equilibrium .

Thinking about becoming a nurse practitioner? Nurse practitioners have one of the fastest growing careers in the country, and we have all the information you need to know about what to expect from nurse practitioner school .

Want to know the fastest and easiest ways to convert between Fahrenheit and Celsius? We've got you covered! Check out our guide to the best ways to convert Celsius to Fahrenheit (or vice versa).

These recommendations are based solely on our knowledge and experience. If you purchase an item through one of our links, PrepScholar may receive a commission.

Trending Now

How to Get Into Harvard and the Ivy League

How to Get a Perfect 4.0 GPA

How to Write an Amazing College Essay

What Exactly Are Colleges Looking For?

ACT vs. SAT: Which Test Should You Take?

When should you take the SAT or ACT?

Get Your Free

Find Your Target SAT Score

Free Complete Official SAT Practice Tests

How to Get a Perfect SAT Score, by an Expert Full Scorer

Score 800 on SAT Math

Score 800 on SAT Reading and Writing

How to Improve Your Low SAT Score

Score 600 on SAT Math

Score 600 on SAT Reading and Writing

Find Your Target ACT Score

Complete Official Free ACT Practice Tests

How to Get a Perfect ACT Score, by a 36 Full Scorer

Get a 36 on ACT English

Get a 36 on ACT Math

Get a 36 on ACT Reading

Get a 36 on ACT Science

How to Improve Your Low ACT Score

Get a 24 on ACT English

Get a 24 on ACT Math

Get a 24 on ACT Reading

Get a 24 on ACT Science

Stay Informed

Get the latest articles and test prep tips!

Christine graduated from Michigan State University with degrees in Environmental Biology and Geography and received her Master's from Duke University. In high school she scored in the 99th percentile on the SAT and was named a National Merit Finalist. She has taught English and biology in several countries.

Ask a Question Below

Have any questions about this article or other topics? Ask below and we'll reply!

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Conclusions

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Conclusions wrap up what you have been discussing in your paper. After moving from general to specific information in the introduction and body paragraphs, your conclusion should begin pulling back into more general information that restates the main points of your argument. Conclusions may also call for action or overview future possible research. The following outline may help you conclude your paper:

In a general way,

• Restate your topic and why it is important,
• Restate your thesis/claim,
• Address opposing viewpoints and explain why readers should align with your position,
• Call for action or overview future research possibilities.

Remember that once you accomplish these tasks, unless otherwise directed by your instructor, you are finished. Done. Complete. Don't try to bring in new points or end with a whiz bang(!) conclusion or try to solve world hunger in the final sentence of your conclusion. Simplicity is best for a clear, convincing message.

The preacher's maxim is one of the most effective formulas to follow for argument papers:

Tell what you're going to tell them (introduction).

Tell them (body).

Tell them what you told them (conclusion).

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• Open access
• Published: 10 August 2024

Mapping biomimicry research to sustainable development goals

• Raghu Raman 1 ,
• Aswathy Sreenivasan 2 ,
• M. Suresh 2 &
• Prema Nedungadi 3  

Scientific Reports volume  14 , Article number:  18613 ( 2024 ) Cite this article

453 Accesses

Metrics details

• Environmental sciences
• Environmental social sciences

This study systematically evaluates biomimicry research within the context of sustainable development goals (SDGs) to discern the interdisciplinary interplay between biomimicry and SDGs. The alignment of biomimicry with key SDGs showcases its interdisciplinary nature and potential to offer solutions across the health, sustainability, and energy sectors. This study identified two primary thematic clusters. The first thematic cluster focused on health, partnership, and life on land (SDGs 3, 17, and 15), highlighting biomimicry's role in healthcare innovations, sustainable collaboration, and land management. This cluster demonstrates the potential of biomimicry to contribute to medical technologies, emphasizing the need for cross-sectoral partnerships and ecosystem preservation. The second thematic cluster revolves around clean water, energy, infrastructure, and marine life (SDGs 6, 7, 9, and 14), showcasing nature-inspired solutions for sustainable development challenges, including energy generation and water purification. The prominence of SDG 7 within this cluster indicates that biomimicry significantly contributes to sustainable energy practices. The analysis of thematic clusters further revealed the broad applicability of biomimicry and its role in enhancing sustainable energy access and promoting ecosystem conservation. Emerging research topics, such as metaheuristics, nanogenerators, exosomes, and bioprinting, indicate a dynamic field poised for significant advancements. By mapping the connections between biomimicry and SDGs, this study provides a comprehensive overview of the field's trajectory, emphasizing its importance in advancing global sustainability efforts.

Similar content being viewed by others

Assessing the sustainability of the European Green Deal and its interlin kages with the SDGs

Greater gains for Australia by tackling all SDGs but the last steps will be the most challenging

Six Transformations to achieve the Sustainable Development Goals

Introduction.

Biomimicry, which combines 'bio' (life) and 'mimicry' (imitation), uses nature's patterns to solve human problems, aligning with the SDGs by fostering innovations 1 . This discipline studies natural processes to inspire sustainable designs and promote responsible consumption and production 2 . Biomimicry emphasizes sustainability, ideation, and education in reconnecting with nature to achieve the SDGs 3 . Collaboration among designers, technologists, and business experts is vital for translating natural mechanisms into commercial solutions 4 . Biomimetics, which aims for radical innovations by replicating living systems, strives for breakthroughs in economic growth 5 . By promoting systemic change through the emulation of nature's regenerative processes, biomimicry's alignment with the SDGs could enhance sustainability efforts. Merging biomimicry insights with SDGs could exceed sustainability benchmarks.

Integrating biomimicry with sustainable development goals (SDGs) is crucial for addressing global challenges. The SDGs offer a blueprint for global well-being and environmental stewardship by 2030 6 . They aim to protect the environment and foster social and economic development. Biomimicry provides innovative approaches to these objectives, drawing from natural strategies. While SDGs offer clear targets, biomimicry complements these by providing a unique lens for solutions 7 . The investigation of biomimicry in conjunction with the SDGs is based on the understanding that the development of biologically inspired materials, structures, and systems offers a novel and sustainable solution to design problems, particularly in the built environment 8 . By mimicking nature's answers to complicated challenges, biomimicry produces creative, clever, long-lasting, and environmentally responsible ideas.

The SDGs outline a comprehensive sustainability agenda targeting social equity, environmental conservation, and poverty alleviation 9 . The use of biomimicry in research can lead to the development of solutions that mimic natural efficiency 10 , revolutionizing industries with resource-efficient technologies and enhancing sustainability. This synergy could lead to environmentally friendly products, improved energy solutions, and effective waste management systems. Integrating biomimicry into industry and education promotes environmental stewardship and ecological appreciation 11 . Marrying biomimicry research with SDGs has accelerated progress toward sustainable development.

Biomimicry can provide insightful and useful solutions consistent with sustainability ideals by imitating the adaptability and efficiency observed in biological systems 12 . The built environment's use of biomimicry has a greater sustainable impact when circular design features are included 13 . Reusing materials, cutting waste, and designing systems that work with natural cycles are all stressed in a circular design. Combining biomimicry and circular design promotes social inclusion, environmental resilience, resourcefulness, and compassionate governance, all of which lead to peaceful coexistence with the environment. This all-encompassing strategy demonstrates a dedication to tackling the larger social and environmental concerns that the SDGs represent and design challenges 14 . Complementing these studies, Wamane 7 examined the intersection of biomimicry, the environmental, social, and governance (ESG) framework, and circular economy principles, advocating for an economic paradigm shift toward sustainability.

A key aspect of realizing the impact of biomimicry on SDGs is the successful translation and commercialization of biomimicry discoveries. This involves overcoming barriers such as skill gaps, the engineering mindset, commercial acumen, and funding. Insights from the "The State of Nature-Inspired-Innovation in the UK" report provide a comprehensive analysis of these challenges and potential strategies to address them, underscoring the importance of integrating commercial perspectives into biomimicry research.

This research employs bibliometric techniques to assess the integration and coherence within circular economy policy-making, emphasizing the potential for a synergistic relationship between environmental stewardship, economic growth, and social equity to foster a sustainable future.

In addressing the notable gap in comprehensive research concerning the contribution of biomimicry solutions to specific SDGs, this study offers significant insights into the interdisciplinary applications of biomimicry and its potential to advance global sustainability efforts. Our investigation aims to bridge this research gap through a systematic analysis, resulting in the formulation of the following research questions:

RQ1: How does an interdisciplinary analysis of biomimicry research align with and contribute to advancing specific SDGs?

RQ2: What emerging topics within biomimicry research are gaining prominence, and how do they relate to the SDGs?

RQ3 : What are the barriers to the translation and commercialization of biomimicry innovations, and how can these barriers be overcome to enhance their impact on SDGs?

RQ4: Based on the identified gaps in research and the potential for interdisciplinary collaboration, what innovative areas within biomimicry can be further explored to address underrepresented SDGs?

The remainder of this paper is arranged as follows. Section " Literature review " focuses on the literature background of biomimicry, followed by methods (section " Methods ") and results and discussion, including emerging research topics (section " Results and discussion "). Section " Conclusion " concludes with recommendations and limitations.

Literature review

The potential of biomimicry solutions for sustainability has long been recognized, yet there is a notable lack of comprehensive studies that explore how biomimicry can address specific sustainable development goals (SDGs) (Table 1 ). This research aims to fill this gap by investigating relevant themes and building upon the literature in this field.

Biomimicry, with its roots tracing back to approximately 500 BC, began with Greek philosophers who developed classical concepts of beauty and drew inspiration from natural organisms for balanced design 15 . This foundational idea of looking to nature for design principles continued through history, as exemplified by Leonardo Da Vinci's creation of a flying machine inspired by birds in 1482. This early instance of biomimicry influenced subsequent advancements, including the Wright brothers' development of the airplane in 1948 12 , 15 . The term "bionics," coined in 1958 to describe "the science of natural systems or their analogs," evolved into "biomimicry" by 1982. Janine Benyus's 1997 book, “Biomimicry: Innovation Inspired by Nature,” and the founding of the Biomimicry Institute (Biomimicry 16 ) were pivotal, positioning nature as a guide and model for sustainable design. Benyus’s work underscores the potential of biomimicry in tackling contemporary environmental challenges such as climate change and ecosystem degradation 12 , 17 .

In recent years, the call for more targeted research in biomimicry has grown, particularly in terms of architecture and energy use. Meena et al. 18 and Varshabi et al. 19 highlighted the need for biomimicry to address energy efficiency in building design, stressing the potential of nature-inspired solutions to reduce energy consumption and enhance sustainability. This perspective aligns with that of Perricone et al. 20 , who explored the differences between artificial and natural systems, noting that biomimetic designs, which mimic the principles of organism construction, can significantly improve resource utilization and ecosystem restoration. Aggarwal and Verma 21 contributed to this discourse by mapping the evolution and applications of biomimicry through scientometric analysis, revealing the growing significance of nature-inspired optimization methodologies, especially in clustering techniques. Their work suggested that these methodologies not only provide innovative solutions but also reflect a deeper integration of biomimetic principles in technological advancements. Building on this, Pinzón and Austin 22 emphasized the infancy of biomimicry in the context of renewable energy, advocating for more research to explore how nature can inspire new energy solutions. Their work connects with that of Carniel et al. 23 , who introduced a natural language processing (NLP) technique to identify research themes in biomimicry across disciplines, facilitating a holistic understanding of current trends and future directions.

To further illustrate the practical applications of biomimicry, Nasser et al. 24 presented the Harmony Search Algorithm (HSA), a nature-inspired optimization technique. Their bibliometric analysis demonstrated the algorithm's effectiveness in reducing energy and resource consumption, highlighting the practical benefits of biomimicry in technological innovation. Rusu et al. 25 expanded on these themes by documenting significant advancements in soft robotics, showing how biomimicry influences design principles and applications in this rapidly evolving field. Their findings underscore the diverse applications of biomimetic principles, from robotics to building design. Shashwat et al. 26 emphasized the role of bioinspired solutions in enhancing energy efficiency within the built environment, promoting the use of high solar reflectance surfaces that mimic natural materials. This perspective is in line with that of Pires et al. 27 , who evaluated the application of biomimicry in dental restorative materials and identified a need for more clinical studies to realize the full potential of biomimetic innovations in healthcare. Liu et al. 28 explored the application of nature-inspired design principles in software-defined networks, demonstrating how biomimetic algorithms can optimize resource and energy utilization in complex systems. This study builds on the broader narrative of biomimicry's potential to transform various sectors by offering efficient, sustainable solutions. Finally, Hinkelman et al. 29 synthesized these insights by discussing the transdisciplinary applications of ecosystem biomimicry, which supports sustainable development goals by integrating biomimetic principles across engineering and environmental disciplines. This comprehensive approach underscores the transformative potential of biomimicry, suggesting that continued interdisciplinary research and innovation are crucial for addressing global sustainability challenges effectively.

PRISMA framework

This study utilizes the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) framework to structure its analysis, following the established five-step protocol: formulating research questions, defining a search strategy, executing a literature search, screening identified literature, and analyzing the findings (Page et al., 2021). The application of the PRISMA guidelines across various research domains, including the SDGs, is well documented 30 .

To ensure a comprehensive search, we searched the Scopus database, a widely utilized resource for bibliometric studies 31 (Donthu et al. 82 ), which led to the discovery of 46,141 publications from 2013 to 2023. This period marked significant research activity following the introduction of the SDGs at the Rio + 20 summit in 2012. Publications were identified using the following terms in the title and abstract: “ (biomimic* OR biomimetic* OR bioinspired OR bioinsp* OR bionic* OR nature-inspired OR "biologically inspired" OR bioinspiration OR biomimesis OR biognosis).”

During the screening phase, publications lacking complete author details were reviewed, narrowing the field to 46,083 publications for further analysis. The eligibility phase utilized proprietary algorithms to map publications to the 17 SDGs, informed by initiatives such as the University of Auckland (Auckland’s SDG mapping 32 ) and Elsevier's SDG Mapping Initiatives (Elsevier's SDG Mapping 33 ). The selection of the Elsevier SDG Mapping Initiative for this study was based on its seamless integration with Scopus, facilitating the use of predefined search queries for each SDG and employing a machine learning model that has been refined through expert review. This approach has been utilized in various studies to analyze research trends within emerging fields. For example, the exploration of green hydrogen was detailed by Raman et al. 34 , while investigations into Fake News and the Dark Web were conducted by Raman et al. 35 , 36 , 37 and Rama et al. 38 , respectively. These examples demonstrate the efficacy of SDG mapping in elucidating how research outputs align with and contribute to sustainable development goals in these emerging domains. This phase identified 13,287 publications as mapped to SDGs. In the inclusion phase, stringent criteria further filtered the publications to English-language journals and review articles, culminating in 13,271 publications deemed suitable for in-depth analysis. This process ensures a comprehensive and high-quality dataset for the study, reflecting the robust and systematic approach afforded by the PRISMA framework in evaluating literature relevant to SDGs.

Our keyword search strategy, while comprehensive, may capture papers that do not genuinely contribute to the field. To mitigate this, we employed manual verification. After the automated search, the authors conducted a manual review of a subset of the final set of identified papers to assess their relevance and authenticity in the context of biomimicry. The subset was based on 20 highly cited papers from each year. We believe that papers that are frequently cited within the community are more likely to be accurately classified. The authors mainly reviewed the introduction, methodology, and results sections to confirm the relevance and authenticity of the papers. However, we acknowledge that these steps may not fully eliminate the inclusion of irrelevant papers, which could skew the results of our meta-analysis.

SDG framework

The examination of sustainable development goals (SDGs) reveals their interconnected nature, where the achievement of one goal often supports progress in others. Studies by Le Blanc (2015) and Allison et al. (2016) have mapped out the complex web of relationships among the SDGs, identifying both strong and subtle linkages across different objectives. To visualize these connections, we employed a cocitation mapping approach using VOSviewer 39 , which allows us to depict the semantic relationships between SDGs through their cocitation rates in scholarly works. This approach generates a visual map where each SDG is represented as a node, with the node size reflecting the goal's research prominence and the thickness of the lines between nodes indicating the frequency of cocitations among the goals. This visual representation reveals the SDGs as an intricate but unified framework, emphasizing the collaborative nature of global sustainability initiatives.

Topic prominence percentile

The Scopus prominence percentile is a crucial metric indicating the visibility and impact of emerging research topics within the scientific community. High-ranking topics in this percentile are rapidly gaining attention, highlighting emerging trends and areas poised for significant advancements. This tool enables researchers and policymakers to identify and focus on innovative topics, ensuring that their efforts align with the forefront of scientific development 35 , 36 , 37 . Topics above the 99.9th percentile were used in this study.

Results and discussion

Rq1: sdg framework and interdisciplinary research (rq4).

This study evaluates biomimicry research through the framework of SDGs. A cocitation SDG map shows two clusters and provides insights into the interplay between biomimicry themes and SDGs, highlighting the cross-disciplinary nature of this research (Fig.  1 ). The blue box hidden behind the “3 – Good Health and Well-being” and “7 – Affordable and Clean Energy” is “11 – Sustainable cities and Communities”. The blue box hidden behind “15 – Life on Land” is “16 – Peace, Justice and Strong institutions”.

Interdisciplinary SDG network of biomimicry research.

Cluster 1 (Red): Biomimetic innovations for health, partnership, and life on land

This cluster comprises a diverse array of research articles that explore the application of biomimicry across various SDGs 3 (health), 17 (partnership), and 15 (land). The papers in this cluster delve into innovative biomimetic ideas, each contributing uniquely to the intersection of sustainable development and biological inspiration. SDG 3, emphasizing good health and well-being for all, is significantly represented, indicating a global effort to leverage biomimicry for advancements in healthcare, such as new medication delivery systems and medical technologies. Similarly, the frequent citations of SDG 17 underscore the vital role of partnerships in achieving sustainable growth, especially where bioinspired solutions require interdisciplinary collaboration to address complex challenges. Finally, the prominence of 15 SDG citations reflects a commitment to preserving terrestrial ecosystems, where biomimicry is increasingly applied in land management, demonstrating nature's adaptability and resilience as a model for sustainable practices. Table 2 lists the top 5 relevant papers from Cluster 1, further illustrating the multifaceted application of biomimicry in addressing these SDGs.

A unique binary variant of the gray wolf optimization (GWO) technique, designed especially for feature selection in classification tasks, was presented by Emary et al. 40 . GWO is a method inspired by the social hierarchy and hunting behavior of gray wolves to find the best solutions to complex problems. This bioinspired optimization technique was used to optimize SDG15, which also highlights its ecological benefits. The results of the study highlight the effectiveness of binary gray wolf optimization in identifying the feature space for ideal pairings and promoting environmental sustainability and biodiversity. Lin et al. 41 focused on SDG 3 by examining catalytically active nanomaterials as potential candidates for artificial enzymes. While acknowledging the limits of naturally occurring enzymes, this study explores how nanobiotechnology can address problems in the food, pharmaceutical, and agrochemical sectors.

The investigation of enzymatic nanomaterials aligns with health-related objectives, highlighting the potential for major improvements in human health. Parodi et al. 42 used biomimetic leukocyte membranes to functionalize synthetic nanoparticles, extending biomimicry into the biomedical domain. To meet SDG 3, this research presents "leukolike vectors," which are nanoporous silicon particles that can communicate with cells, evade the immune system, and deliver specific payloads. In line with the SDGs about health, this study emphasizes the possible uses of biomimetic structures in cancer detection and treatments. A novel strategy for biological photothermal nanodot-based anticancer therapy utilizing peptide‒porphyrin conjugate self-assembly was presented by Zou et al. 43 . For therapeutic reasons, efficient light-to-heat conversion can be achieved by imitating the structure of biological structures. By providing a unique biomimetic approach to cancer treatment and demonstrating the potential of self-assembling biomaterials in biomedical applications, this research advances SDG 3. Finally, Wang et al. 44 presented Monarch butterfly optimization (MBO), which is a bioinspired algorithm that mimics the migration patterns of monarch butterflies to solve optimization problems effectively. This method presents a novel approach to optimization, mimicking the migration of monarch butterflies, aligning with SDG 9. Comparative analyses highlight MBO's exceptional performance and demonstrate its capacity to address intricate issues about business and innovation, supporting objectives for long-term collaboration and sector expansion.

The publications in Cluster 1 show a wide range of biomimetic developments, from ecological optimization to new optimization techniques and biomedical applications. These varied contributions highlight how biomimicry can advance sustainable development in health, symbiosis, and terrestrial life.

Cluster 2 (green): Nature-inspired solutions for clean water, energy, and infrastructure

Cluster 2, which focuses on the innovative application of biomimicry in sustainable development, represents a range of research that aligns with SDGs 6 (sanitation), 7 (energy), 9 (infrastructure), and 14 (water). This cluster is characterized by studies that draw inspiration from natural processes and structures to offer creative solutions to sustainability-related challenges. The papers in this cluster, detailed in Table 3 , demonstrate how biomimicry can address key global concerns in a varied and compelling manner.

Within this cluster, the high citation counts for SDG 7 underscore the significance of accessible clean energy, a domain where biomimicry contributes innovative energy generation and storage solutions inspired by natural processes. This aligns with the growing emphasis on sustainable energy practices. The prominence of SDG 9 citations further highlights the global focus on innovation and sustainable industry, where biomimicry's role in developing nature-inspired designs is crucial for building robust systems and resilient infrastructure. Furthermore, the substantial citations for SDG 6 reflect a dedicated effort toward ensuring access to clean water and sanitation for all. In this regard, biomimicry principles are being applied in water purification technologies, illustrating how sustainable solutions modeled after natural processes can effectively meet clean water objectives.

The study by Sydney Gladman et al. (2016), which presented the idea of shape-morphing systems inspired by nastic plant motions, is one notable addition to this cluster. This discovery creates new opportunities for tissue engineering, autonomous robotics, and smart textile applications by encoding composite hydrogel designs that exhibit anisotropic swelling behavior. The emphasis of SDG 9 on promoting industry, innovation, and infrastructure aligns with this biomimetic strategy. SDGs 7 and 13 are addressed in the study of Li et al. 45 , which is about engineering heterogeneous semiconductors for solar water splitting. This work contributes to the goals of inexpensive, clean energy and climate action by investigating methods such as band structure engineering and bionic engineering to increase the efficiency of solar water splitting. Li et al. 46 conducted a thorough study highlighting the importance of catalysts for the selective photoreduction of CO2 into solar fuels. This review offers valuable insights into the use of semiconductor catalysts for selective photocatalytic CO2 reduction. Our work advances sustainable energy solutions by investigating biomimetic, metal-based, and metal-free cocatalysts and contributes to SDGs 7 and 13. Wang et al. 47 address the critical problem of water pollution. Creating materials with superlyophilic and superlyophobic qualities offers a creative method for effectively separating water and oil. This contributes to the goals of clean water, industry, innovation, and life below the water. It also correlates with SDGs 6, 9, and 14. Singh et al. 48 also explored the 'green' synthesis of metals and their oxide nanoparticles for environmental remediation, which furthers SDG 9. This review demonstrates the environmentally benign and sustainable features of green synthesis and its potential to lessen the environmental impact of conventional synthesis methods.

Cluster 2 provides nature-inspired solutions for clean water, renewable energy, and sustainable infrastructure, demonstrating the scope and importance of biomimicry. The varied applications discussed in these papers help overcome difficult problems and advance sustainable development in line with several SDGs.

RQ2: Emerging research topics

Temporal evolution of emerging topics.

Figure  2 displays the publication counts for various emerging topics from 2013 to 2022, indicating growth trends over the years. For 'Metaheuristics', there is a notable increase in publications peaking in approximately 2020, suggesting a surge in interest. 'Strain sensor' research steadily increased, reaching its highest publication frequency toward the end of the period, which is indicative of growing relevance in the field. 'Bioprinting' sharply increased over the next decade, subsequently maintaining high interest, which highlights its sustained innovation. In contrast, 'Actuators' showed fluctuating publication counts, with a recent upward trend. 'Cancer' research, while historically a major topic, displayed a spike in publications in approximately 2018, possibly reflecting a breakthrough or increased research funding. 'Myeloperoxidase' has a smaller presence in the literature, with a modest peak in 2019. The number of 'Water '-related publications remains relatively low but shows a slight increase, suggesting a gradual but increasing recognition of its importance. Research on exosomes has significantly advanced, particularly since 2018, signifying a greater area of focus. 'Mechanical' topic publications have moderate fluctuations without a clear trend, indicating steady research interest. 'Micromotors' experienced an initial publication surge, followed by a decline and then a recent resurgence, possibly due to new technological applications. 'Nanogenerators' have shown a dramatic increase in interest, particularly in recent years, while 'Hydrogel' publications have varied, with a recent decline, which may point toward a shift in research focus or maturity of the topic.

Evolution of emerging topics according to publications (y-axis denotes the number of publications; x-axis denotes the year of publication).

Figure  3 presents the distribution of various research topics based on their prominence percentile and total number of publications. Topics above the 99.9th percentile and to the right of the vertical threshold line represent the most emergent and prolific topics of study. Next, we examine the topics within each of the four quadrants, focusing on how each topic has developed over the years in relation to SDGs and the key phrases associated with each topic.

Distribution of research topics based on prominence percentile and total number of publications.

Next, we examine each research topic in four quadrants, assessing their evolution concerning SDGs. We also analyze the keyphrase cloud to identify which keyphrases are most relevant (indicated by their font size) and whether they are growing or not. In the key phrase cloud, green indicates an increasing relevance of the key phrase, grey signifies that its relevance remains constant, and blue represents a declining relevance of the key phrase.

Niche biomimetic applications

These are topics with a lower number of publications and prominence percentiles, indicating specialized or emerging areas of research that are not yet widely recognized or pursued (Quadrant 1—bottom left).

Myeloperoxidase; colorimetric; chromogenic compounds

The inclusion of myeloperoxidase indicates that inflammation and the immune system are the main research topics. The focus on chromogenic and colorimetric molecules suggests a relationship to analytical techniques for identifying biological materials. The evolution of the research is depicted in Fig.  4 a shows an evolving emphasis on various sustainable development goals (SDGs) over time. The research trajectory, initially rooted in SDG 3 (Good Health and Well-being), has progressively branched out to encompass SDG 7 (Affordable and Clean Energy) and SDG 6 (Clean Water and Sanitation), reflecting an expanding scope of inquiry within the forestry sciences. More recently, the focus has transitioned toward SDG 15 (Life on Land), indicating an increased recognition of the interconnectedness between forest ecosystems and broader environmental and sustainability goals. This trend underscores the growing complexity and multidisciplinary nature of forestry research, highlighting the need to address comprehensive ecological concerns along with human well-being and sustainable development.

Evolution of research ( a ) and key phrases ( b ).

The word cloud in Fig.  4 b highlights key phrases such as 'Biocompatible', 'Actuator', and 'Self-healing Hydrogel', reflecting a focus on advanced materials, while terms such as 'Elastic Modulus' and 'Polymeric Networks' suggest an emphasis on the structural properties essential for creating innovative diagnostic and environmental sensing tools. Such developments are pertinent to health monitoring and water purification, resonating with SDG 3 (Good Health and Well-being) and SDG 6 (Clean Water and Sanitation). The prominence of 'Self-healing' and 'Bioinspired' indicates a shift toward materials that emulate natural processes for durability and longevity, supporting sustainable industry practices aligned with SDG 9 (Industry, Innovation, and Infrastructure) and SDG 12 (Responsible Consumption and Production), contributing to the overarching aim of sustainable development.

Next, we analyzed the top 3 cited publications. Catalytically active nanomaterials, or nanozymes, are exciting candidates for artificial enzymes, according to Lin et al. 41 . The authors explore the structural features and biomimetics applications of these enzymes, classifying them as metal-, carbon-, and metal oxide-based nanomaterials. This study emphasizes the benefits of enzymes over natural enzymes, including their high stability, variable catalytic activity, and controlled production. Wang et al. 49 developed biomimetic nanoflowers made from nanozymes to cause intracellular oxidative damage in hypoxic malignancies. Under both normoxic and hypoxic conditions, the nanoflowers demonstrated catalytic efficiency. By overcoming the constraints of existing systems that depend on oxygen availability or external stimuli, this novel technique represents a viable treatment option for malignant neoplasms. Gao et al. 50 investigated the use of a dual inorganic nanozyme-catalyzed cascade reaction as a biomimetic approach for nanocatalytic tumor therapy. This approach produces a high level of therapeutic efficacy by cascading catalytic events inside the tumor microenvironment. This study highlights the potential of inorganic nanozymes for achieving high therapeutic efficacy and outstanding biosafety, which adds to the growing interest in nanocatalytic tumor therapy.

Water; hydrophobicity; aerogels

With an emphasis on hydrophobicity, aerogel use, and water-related features, this topic relates to materials science and indicates interest in cutting-edge materials with unique qualities. From Fig.  5 a, we can see that, initially, the focus was directed toward SDG 6 (Clean Water and Sanitation), which is intrinsically related to the research theme, as biomimetic approaches are leveraged to develop innovative water purification and management solutions. As the research progressed, the scope expanded to intersect with SDG 14 (Life Below Water) and SDG 7 (Affordable and Clean Energy), signifying a broadened impact of biomimetic innovations in marine ecosystem conservation and energy-efficient materials. The gradual involvement with SDG 9 (industry, innovation, and infrastructure) and SDG 13 (climate action) indicates the interdisciplinary reach of this research, which aims to influence industrial practices and climate change mitigation strategies.

The word cloud in Fig.  5 b reinforces this narrative by showcasing key phrases such as 'Hydrophobic', 'Bioinspired', 'Emulsion', and 'Oil Pollution', which reflect the emphasis on developing materials and technologies that mimic natural water repellency and separation processes. 'Aerogel' and 'polydopamine', along with 'Underwater' and 'Biomimetic Cleaning', suggest a strong focus on creating lightweight, efficient materials capable of self-cleaning and oil spill remediation. These keywords encapsulate the essence of the research theme, demonstrating a clear alignment with the targeted SDGs and the overall aim of sustainable development through biomimicry.

Three highly referenced works that have made substantial contributions to the field of biomimetic materials for oil/water separation are included in the table. The development of superlyophilic and superlyophobic materials for effective oil/water separation was examined by Wang et al. 47 . This review highlights the applications of these materials in separating different oil-and-water combinations by classifying them according to their surface wettability qualities. The excellent efficiency, selectivity, and recyclability of the materials—which present a viable treatment option for industrial oily wastewater and oil spills—are highlighted in the paper. Su et al. 51 explored the evolution of super wettability systems. The studies included superhydrophobicity, superoleophobicity, and undersea counterparts, among other extreme wettabilities. The kinetics, material structures, and wetting conditions related to obtaining superwettability are covered in the article. This demonstrates the wide range of uses for these materials in chemistry and materials science, including self-cleaning fabrics and systems for separating oil and water. Zhang et al. 52 presented a bioinspired multifunctional foam with self-cleaning and oil/water separation capabilities. To construct a polyurethane foam with superhydrophobicity and superoleophobicity, this study used porous biomaterials and superhydrophobic self-cleaning lotus leaves. Foam works well for separating oil from water because of its slight weight and ability to float on water. It also shows exceptional resistance to corrosive liquids. According to the article, multifunctional foams for large-scale oil spill cleaning might be designed using a low-cost fabrication technology that could be widely adopted.

Growing interest in bioinspired healthcare

These topics have a higher prominence percentile but a lower number of publications, suggesting growing interest and importance in the field despite a smaller body of research (Quadrant 2—top left).

Exosomes; extracellular vesicles; MicroRNAs

Exosomes and extracellular vesicles are essential for intercellular communication, and reference to microRNAs implies a focus on genetic regulation. The evolution of this topic reflects an increasing alignment with specific sustainable development goals (SDGs) over the years. The initial research focused on SDG 3 (good health and well-being) has expanded to encompass SDG 9 (industry, innovation, and infrastructure) and SDG 6 (clean water and sanitation), showcasing the multifaceted impact of biomimetic research in healthcare (Fig.  6 a). The research trajectory into SDG 9 and SDG 6 suggests broader application of bioinspired technologies beyond healthcare, potentially influencing sustainable industrial processes and water treatment technologies, respectively.

The word cloud (Fig.  6 b) underscores the central role of 'Extracellular Vesicles' and 'Exosomes' as platforms for 'Targeted Drug Delivery' and 'Nanocarrier' systems, which are key innovations in medical biotechnology. The prominence of terms such as 'Bioinspired', 'Biomimetic', 'Liposome', and 'Gold Nanoparticle' illustrates the inspiration drawn from biological systems for developing advanced materials and delivery mechanisms. These key phrases indicate significant advancements in 'Controlled Drug Delivery Systems', 'Cancer Chemotherapy', and 'Molecular Imaging', which have contributed to improved diagnostics and treatment options, consistent with the objectives of SDG 3.

The work by Jang et al. 53 , which introduced bioinspired exosome-mimetic nanovesicles for improved drug delivery to tumor tissues, is one of the most cited articles. These nanovesicles, which resemble exosomes but have higher creation yields, target cells and slow the growth of tumors in a promising way. Yong et al.'s 54 work presented an effective drug carrier for targeted cancer chemotherapy, focusing on biocompatible tumor cell-exocytosed exosome-biomimetic porous silicon nanoparticles. A paper by Cheng et al. 55 discussed the difficulties in delivering proteins intracellularly. This study suggested a biomimetic nanoparticle platform that uses extracellular vesicle membranes and metal–organic frameworks. These highly cited studies highlight the importance of biomimetic techniques in improving drug delivery systems for improved therapeutic interventions.

Nanogenerators; piezoelectric; energy harvesting

This topic advises concentrating on technology for energy harvesting, especially for those that use piezoelectric materials and nanogenerators. We see a rising focus on medical applications of biomimetics, from diagnostics to energy harvesting mimicking biological systems.

The evolution of this research topic reflects a broader contribution to the SDGs by not only addressing healthcare needs but also by promoting sustainable energy practices and supporting resilient infrastructure through biomimetic innovation (Fig.  7 a). Initially, the emphasis on SDG 3 (Good Health and Well-being) suggested the early application of biomimetic principles in healthcare, particularly in medical devices and diagnostics leveraging piezoelectric effects. Over time, the transition toward SDG 7 (Affordable and Clean Energy) and SDG 9 (Industry, Innovation, and Infrastructure) indicates an expansion of bioinspired technologies into sustainable energy solutions and industrial applications. Nanogenerators and energy harvesting techniques draw inspiration from biological processes and structures, aiming to optimize energy efficiency and contribute to clean energy initiatives.

The word cloud in Fig.  7 b emphasizes key phrases such as 'Piezoelectric', 'Energy Harvesting', 'Tactile Sensor', 'Triboelectricity', and 'Nanogenerators', highlighting the core technologies that are being developed. These terms, along with 'Bioinspired', 'Wearable Electronic Devices', and 'Energy Conversion Efficiency', illustrate the convergence of natural principles with advanced material science to create innovative solutions for energy generation and sensor technology.

Yang et al.'s 56 study in Advanced Materials presented the first triboelectrification-based bionic membrane sensor. Wearable medical monitoring and biometric authentication systems will find new uses for this sensor since it allows self-powered physiological and behavioral measurements, such as noninvasive human health evaluation, anti-interference throat voice recording, and multimodal biometric authentication. A thorough analysis of the state-of-the-art in piezoelectric energy harvesting was presented by Sezer and Koç 57 . This article addresses the fundamentals, components, and uses of piezoelectric generators, highlighting their development, drawbacks, and prospects. It also predicts a time when piezoelectric technology will power many electronics. The 2021 paper by Zhao et al. 58 examines the use of cellulose-based materials in flexible electronics. This section describes the benefits of these materials and the latest developments in intelligent electronic device creation, including biomimetic electronic skins, optoelectronics, sensors, and optoelectronic devices. This review sheds light on the possible drawbacks and opportunities for wearable technology and bioelectronic systems based on cellulose.

Leading edge of biomimetic sensing and electronics

This quadrant represents topics with both a high number of publications and a prominence percentile, indicating well-established and influential research areas (Quadrant 3—top right).

Strain sensor; flexible electronics; sensor

Figure  8 a highlights the progress of research on bioinspired innovations, particularly in the development of strain sensors and flexible electronics for adaptive sensing technologies. Initially, concentrated on health applications aligned with SDG 3 (Good Health and Well-being), the focus has expanded. The integration of SDG 9 (Industry, Innovation, and Infrastructure) indicates a shift toward industrial applications, while the incorporation of SDG 7 (Affordable and Clean Energy) suggests a commitment to energy-efficient solutions. Additionally, the mention of SDG 11 (Sustainable Cities and Communities) and SDG 12 (Responsible Consumption and Production) reflects the broadening scope to include urban sustainability and eco-friendly manufacturing practices.

Figure  8 b provides insight into the key phrases associated with this research topic, highlighting terms such as 'Bioinspired', 'Self-healing', 'Wearable Electronic Devices', 'Flexible Electronics', and 'Pressure Sensor'. These key phrases speak to the innovative approaches for creating sensors and electronics that are not only inspired by biological systems but also capable of seamlessly integrating human activity and environmental needs. The mention of 'Wearable Sensors' and 'Tactile Sensor' indicates a focus on user interaction and sensitivity, which is crucial for medical applications and smart infrastructure.

The top three articles with the most citations represent the cutting edge of this topic’s study. Chortos et al. 59 investigated how skin characteristics can be replicated for medicinal and prosthetic uses. Kim et al. 60 focused on creating ultrathin silicon nanoribbon sensors for smart prosthetic skin, opening up new possibilities for bionic systems with many sensors. A bioinspired microhairy sensor for ultraconformability on nonflat surfaces was introduced in Pang et al.'s 61 article, which significantly improved signal-to-noise ratios for accurate physiological measurements.

Cancer; photoacoustics; theranostic nanomedicine

Modern technologies such as photoacoustics, theranostic nanomedicine, and cancer research suggest that novel cancer diagnosis and therapy methods are highly needed. Figure  9 a traces the research focus that has evolved across various SDGs over time, commencing with SDG 3 (Good Health and Well-being), which is indicative of the central role of health in biomimetic research. It then extends into SDG 9 (Industry, Innovation, and Infrastructure) and SDG 7 (Affordable and Clean Energy), illustrating the cross-disciplinary applications of biomimetic technologies from healthcare to the energy and industrial sectors.

Figure  9 b provides a snapshot of the prominent keywords within this research theme, featuring terms such as “photodynamic therapy”, “photothermal chemotherapy”, “nanocarrier”, and “controlled drug delivery”. These terms underscore the innovative therapeutic strategies that mimic biological mechanisms for targeted cancer treatment. 'Bioinspired' and 'Biomimetic Synthesis' reflect the approach of deriving design principles from natural systems for the development of advanced materials and medical devices. 'Theranostic nanomedicine' integrates diagnosis and therapy, demonstrating a trend toward personalized and precision medicine.

A study conducted by Yu et al. 62 presented a novel approach for synergistic chemiexcited photodynamic-starvation therapy against metastatic tumors: a biomimetic nanoreactor, or bio-NR. Bio-NRs use hollow mesoporous silica nanoparticles to catalyze the conversion of glucose to hydrogen peroxide for starvation therapy while also producing singlet oxygen for photodynamic therapy. Bio-NR is promising for treating cancer metastasis because its coating on cancer cells improves its biological qualities. Yang et al.'s 63 study focused on a biocompatible Gd-integrated CuS nanotheranostic agent created via a biomimetic approach. This drug has low systemic side effects and good photothermal conversion efficiency, making it suitable for skin cancer therapy. It also performs well in imaging. The ultrasmall copper sulfide nanoparticles generated within ferritin nanocages are described in Wang et al.’s 64 publication. This work highlights the possibility of photoacoustic imaging-guided photothermal therapy with improved therapeutic efficiency and biocompatibility. These highly referenced articles highlight the significance of biomimetic techniques in furthering nanotheranostics and cancer therapy.

Established biomimetic foundations

Here, there are topics with a greater number of publications but a lower prominence percentile, which may imply areas where there has been significant research but that may be waning in influence or undergoing a shift in focus (Quadrant 4—bottom right).

Metaheuristics; Fireflies; Chiroptera

This topic is a fascinating mix of subjects. Using Firefly and Chiroptera in metaheuristic optimization algorithms provides a bioinspired method for resolving challenging issues. The thematic progression of research papers suggests the maturation of biomimetic disciplines that resonate with several SDGs (Fig.  10 a). The shift from initially aligning with SDG 3 (Good Health and Well-being) extends to intersecting with goals such as SDG 9 (Industry, Innovation, and Infrastructure), SDG 7 (Affordable and Clean Energy), SDG 11 (Sustainable Cities and Communities), SDG 13 (Climate Action), and SDG 15 (Life on Land). This diversification reflects the expansive utility of biomimetic approaches, from health applications to broader environmental and societal challenges.

The top keyphrases, such as 'Swarm Intelligence', 'Global Optimization', 'Cuckoo Search Algorithm', and 'Particle Swarm Optimization', are shown in Fig.  10 b highlights the utilization of nature-inspired algorithms for solving complex optimization problems. These terms, along with the 'Firefly Algorithm' and 'Bat Algorithm', underscore the transition of natural phenomena into computational algorithms that mimic the behavioral patterns of biological organisms, offering robust solutions in various fields, including resource management, logistics, and engineering design.

The three highly referenced metaheuristic publications centered around the “Moth Flame Optimization (MFO),” Salp Swarm Algorithm (SSA),” and Whale Optimization Algorithm (WOA).” The WOA, authored by Mirjalili and Lewis 65 , is a competitive solution for mathematical optimization and structural design issues because it emulates the social behavior of humpback whales. Inspired by the swarming behavior of salps, Mirjalili et al. 66 introduced the SSA and multiobjective SSA. This shows how well they function in optimizing a variety of engineering design difficulties. Finally, Mirjalili 67 suggested the MFO algorithm, which is modeled after the navigational strategy of moths and exhibits competitive performance in resolving benchmark and real-world engineering issues.

Bioprinting; three-dimensional printing; tissue engineering

The emphasis on sophisticated manufacturing methods for biological applications in this field suggests a keen interest in the nexus of biology and technology, especially in tissue engineering. As shown in Fig.  11 a, the topic's evolution encompasses Sustainable Development Goals (SDGs) that have transitioned over the years, including SDG 3 (Good Health and Well-being), which is inherently connected to the advancement of medical technologies and tissue engineering for health applications. This research also touches upon SDG 6 (Clean Water and Sanitation) and SDG 7 (Affordable and Clean Energy), suggesting applications of bioprinting technologies in the environmental sustainability and energy sectors. The progression toward SDG 9 (Industry, Innovation, and Infrastructure) and SDG 15 (Life on Land) reflects a broader impact, where biomimetic principles are applied to foster innovation in industrial processes and contribute to the preservation of terrestrial ecosystems.

Key phrases emerging from the word cloud in Fig.  11 b, such as “Hydrogel”, “Biofabrication”, “Tissue Scaffold”, and “Regenerative Medicine”, highlight the specialized methodologies and materials that are inspired by natural processes and structures. Terms such as 'Three-Dimensional Printing' and 'Bioprinting' underscore the technological advancements in creating complex biological structures, aiming to revolutionize the field of tissue engineering and regenerative medicine.

Three widely referenced papers about advances in 3D printing—particularly in bioprinting, soft matter, and the incorporation of biological tissue with functional electronics—are described next. Truby and Lewis’s 68 review of light- and ink-based 3D printing techniques is ground-breaking. This highlights the technology's capacity to create soft matter with tunable properties and its potential applications in robotics, shape-morphing systems, biologically inspired composites, and soft sensors. Ozbolat, and Hospodiuk 69 provide a thorough analysis of “extrusion-based bioprinting (EBB).” The adaptability of EBB in printing different biologics is discussed in the paper, with a focus on its uses in pharmaceutics, primary research, and clinical contexts. Future directions and challenges in EBB technology are also discussed. Using 3D printing, Mannoor et al. 70 presented a novel method for fusing organic tissue with functioning electronics. In the proof-of-concept, a hydrogel matrix seeded with cells and an interwoven conductive polymer containing silver nanoparticles are 3D printed to create a bionic ear. The improved auditory sensing capabilities of the printed ear show how this novel technology allows biological and nanoelectronic features to work together harmoniously.

RQ3: Translation and commercialization

Biomimicry offers promising solutions for sustainability in commercial industries with environmentally sustainable product innovation and energy savings with reduced resource commitment 71 . However, translating biomimicry innovations from research to commercialization presents challenges, including product validation, regulatory hurdles, and the need for strategic investment, innovative financial models, and interdisciplinary collaboration 71 , 72 , 73 , 74 . Ethical considerations highlight the need for universally applicable ethical guidelines regarding the moral debates surrounding biomimicry, such as motivations for pursuing such approaches and the valuation of nature 75 .

Addressing these barriers requires interdisciplinary collaboration, targeted education, and training programs. Strategic investment in biomimicry research and development is also crucial. Encouraging an engineering mindset that integrates biomimicry principles into conventional practices and developing commercial acumen among researchers is essential for navigating the market landscape 76 . Securing sufficient funding is essential for the development, testing, and scaling of these innovations 76 .

Successful case studies illustrate that the strategic integration of biomimicry enhances corporate sustainability and innovation (Larson & Meier 2017). In biomedical research, biomimetic approaches such as novel scaffolds and artificial skins have made significant strides (Zhang 2012). Architecture benefits through energy-efficient building facades modeled after natural cooling systems (Webb et al. 2017). The textile industry uses biomimicry to create sustainable, high-performance fabrics 77 .

RQ4: Interdisciplinary collaboration

Agricultural innovations (sdgs 1—no poverty and 2—zero hunger).

Environmental degradation, biodiversity loss, poverty, and hunger highlight the need for sustainable agricultural methods to mimic natural ecosystems. This includes computational models for ecological interactions, field experiments for biomimetic techniques, and novel materials inspired by natural soil processes. Research can develop solutions such as artificial photosynthesis for energy capture, polyculture systems mimicking ecosystem diversity, and bioinspired materials for soil regeneration and water retention 28 . These innovations can improve sustainability and energy efficiency in agriculture, addressing poverty and hunger through sustainable farming practices.

Educational models (SDG 4—Quality education)

Integrating sustainability principles and biomimicry into educational curricula at all levels presents opportunities for innovation. Collaborations between educators, environmental scientists, and designers can create immersive learning experiences that promote sustainability. This includes interdisciplinary curricula with biomimicry case studies, digital tools, and simulations for exploring biomimetic designs, and participatory learning approaches for engaging students with natural environments. Designing biomimicry-based educational tools and programs can help students engage in hands-on, project-based learning 10 , fostering a deeper understanding of sustainable living and problem-solving.

Gender-inclusive design (SDG 5—Gender inequality)

Gender biases in design and innovation call for research into biomimetic designs and technologies that facilitate gender equality. This includes participatory design processes involving women as cocreators, studying natural systems for inclusive strategies, and applying biomimetic principles to develop technologies supporting gender equality. Bioinspired technologies can address women's specific needs, enhancing access to education, healthcare, and economic opportunities. Interdisciplinary approaches involving gender studies, engineering, and environmental science can uncover new pathways for inclusive innovation.

Inclusive urban solutions (SDG 11—Sustainable cities and communities)

Rapid urbanization challenges such as housing shortages, environmental degradation, and unsustainable transportation systems require innovative solutions. Methodologies include systems thinking in urban planning, simulation tools for modeling biomimetic solutions, and pilot projects testing bioinspired urban innovations. Research on biomimetic architecture for affordable housing, green infrastructure for climate resilience, and bioinspired transportation systems can offer solutions. Collaborative efforts among architects, urban planners, ecologists, and sociologists are essential 78 .

Peace and justice (SDG 16—Peace, justice and institutions)

Social conflicts and weak institutions necessitate innovative approaches that integrate political science, sociology, and biology. Methods involve case studies, theoretical modeling, and participatory action research to develop strategies for peacebuilding and institutional development.

This research provides a comprehensive exploration of the multifaceted dimensions of biomimicry, SDG alignment, and interdisciplinary topics, demonstrating a clear trajectory of growth and relevance. Interdisciplinary collaboration has emerged as a pivotal strategy for unlocking the full potential of biomimicry in addressing underexplored SDGs.

While answering RQ1, the interdisciplinary analysis underscores the significant alignment of biomimicry research with several SDGs. This reflects the interdisciplinary nature of biomimicry and its ability to generate solutions for societal challenges. The analysis of two thematic clusters revealed the broad applicability of biomimicry across various sustainable development goals (SDGs). The first cluster includes health, partnership, and life on land (SDGs 3, 17, and 15), highlighting biomimicry's potential in medical technologies, sustainability collaborations, and land management. The second cluster encompasses clean water, energy, infrastructure, and marine life (SDGs 6, 7, 9, and 14), demonstrating innovative approaches to clean energy generation, sustainable infrastructure, and water purification.

In response to RQ2, this study highlights emerging topics within biomimicry research, such as metaheuristics and nanogenerators, which reflect a dynamic and evolving field that is swiftly gaining attention. These topics, alongside sensors, flexible electronics, and strain sensors, denote evolving research objectives and societal demands, pointing to new areas of study and innovation. This focus on interdisciplinary topics within biomimicry underscores the field’s adaptability and responsiveness to the shifting landscapes of technological and societal challenges.

In addressing RQ3, biomimicry holds potential for sustainable innovation but faces challenges in commercialization. Biomimicry inspires diverse technological and product innovations, driving sustainable advancements (Lurie-Luke 84 ). Overcoming these barriers through strategic investment, training, interdisciplinary collaboration, and ethical guidelines is essential for unlocking their full potential.

For RQ4 , the recommendations are formulated based on underexplored SDGs like 1, 4, 5, and 10 where biomimicry could play a pivotal role.

Future research could apply generative AI models to this dataset to validate the findings and explore additional insights. While our current study did not explore this topic, we see significant potential for this approach. Generative AI models can process extensive datasets and reveal patterns, potentially offering insights into biomimetic research correlations. The interpretation required for context-specific analysis remains challenging for generative AI 36 , 37

Our study provides valuable insights, but some limitations are worth considering. The chosen database might limit the comprehensiveness of the research captured, potentially excluding relevant work from other sources. Additionally, while the combination of cocitation mapping and BERTopic modeling provides a powerful analysis, both methods have inherent limitations. They may oversimplify the complexities of the field or introduce bias during theme interpretation, even with advanced techniques. Furthermore, our use of citations to thematically clustered publications as a proxy for impact inherits the limitations of citation analysis, such as biases toward established ideas and potential misinterpretations 79 , 80 . Another limitation of our study is the potential for missing accurate SDG mappings, as multiple SDG mapping initiatives are available, and our reliance on a single, Scopus-integrated method may not capture all relevant associations. Consequently, this could have resulted in the exclusion of papers that were appropriately aligned with certain SDGs but were not identified by our chosen mapping approach. Given these limitations, this study provides a valuable snapshot for understanding biomimicry research.

Data availability

All data generated or analyzed during this study are included in this published article and its supplementary information files.

El-Zeiny, R. M. A. Biomimicry as a problem solving methodology in interior architecture. Procedia. Soc. 50 , 502–512 (2012).

Article   Google Scholar  

Othmani, N. I., Sahak, N. M. & Yunos, M. Y. M. Biomimicry in agrotechnology: Future solution of water problem for the agriculture industry?. IOP Conf. Ser.: Earth Environ. Sci. 756 (1), 012051. https://doi.org/10.1088/1755-1315/756/1/012051 (2021).

Bensaude-Vincent, B. Bioinformed emerging technologies and their relation to the sustainability aims of biomimicry. Environ. Values 28 (5), 551–571 (2019).

Chirazi, J. E. Commercialization journeys: Bringing biomimetic innovation to the market. In Biomim. Mat., Des. and Habit. (pp. 393–436). Elsevier (2022).

Vincent, J. F., Bogatyreva, O. A., Bogatyrev, N. R., Bowyer, A. & Pahl, A. K. Biomimetics: Its practice and theory. J. R. Soc. Interface 3 (9), 471–482 (2006).

Article   PubMed   PubMed Central   Google Scholar  

Pogge, T. & Sengupta, M. The sustainable development goals: A plan for building a better world?. J. Glob. Ethics 11 (1), 56–64 (2015).

Wamane, G. V. A “new deal” for a sustainable future: Enhancing circular economy by employing ESG principles and biomimicry for efficiency. Manag. Environ. Qual. https://doi.org/10.1108/MEQ-07-2022-0189 (2023).

Butt, A. N. & Dimitrijević, B. Multidisciplinary and transdisciplinary collaboration in nature-based design of sustainable architecture and urbanism. Sustainability 14 (16), 10339 (2022).

Gupta, J. & Vegelin, C. Sustainable development goals and inclusive development. INEA 16 , 433–448 (2016).

Google Scholar  

Hayes, S., Desha, C. & Baumeister, D. Learning from nature—Biomimicry innovation to support infrastructure sustainability and resilience. TFSC 161 , 120287 (2020).

Toner, J., Desha, C., Reis, K., Hes, D. & Hayes, S. Integrating ecological knowledge into regenerative design: A rapid practice review. Sustainability 15 (17), 13271 (2023).

Jamei, E. & Vrcelj, Z. Biomimicry and the built environment, learning from nature’s solutions. Appl. Sci. 11 (16), 7514 (2021).

Article   CAS   Google Scholar  

Blanco, E., Pedersen Zari, M., Raskin, K. & Clergeau, P. Urban ecosystem-level biomimicry and regenerative design: Linking ecosystem functioning and urban built environments. Sustainability 13 (1), 404 (2021).

Rebecca, C. Climate Action Through Biomimcry: Innovation for the SDGs. Sustainable Brands. https://sustainablebrands.com/read/product-service-design-innovation/climate-action-through-biomimicry-innovation-for-the-sdgs . (Accessed on January 9, 2024) (2020).

Vierra, S. Biomimicry: Designing to model nature. Whole Build. Des. Guide 1–10 (2011).

Biomimicry Institute. Case Studies of Commercialisation of Biomimicry Innovations (2023).

Fayemi, P. E., Wanieck, K., Zollfrank, C., Maranzana, N. & Aoussat, A. Biomimetics: Process, tools and practice. Bioinsp. Biomim. 12 (1), 011002. https://doi.org/10.1088/1748-3190/12/1/011002 (2017).

Article   PubMed   CAS   Google Scholar  

Meena, A. K., D’Costa, D., Bhavsar, S., Kshirsagar, M. & Kulkarni, S. Applications of biomimicry in construction and architecture: A bibliometric analysis. Lib. Phil. Prac. Lincoln, NE, USA , 1–17 (2021).

Varshabi, N., Arslan Selçuk, S. & Mutlu Avinç, G. Biomimicry for energy-efficient building design: A bibliometric analysis. Biomimetics 7 (1), 21 (2022).

Perricone, V., Langella, C. & Santulli, C. Sustainable Biomimetics: A Discussion on Differences in Scale, Complexity, and Organization Between the Natural and Artificial World. In Bion. Sustain. Design 171–193 (Springer Nature Singapore, 2022).

Aggarwal, S., & Verma, A. Scientometric analysis of research trends in clustering and nature inspired techniques. In AIP Conf. Proc. (Vol. 2576, No. 1). AIP Publishing (2022, December).

Pinzón, O. A. & Austin, M. C. Nature as an Inspiration to Exploit Renewable Energy Sources: A Review on Trends and Biological Strategies. In 2022 8th International Engineering, Sciences and Technology Conference (IESTEC) 463–468 (IEEE, 2022).

Carniel, T., Cazenille, L., Dalle, J. M. & Halloy, J. Using natural language processing to find research topics in Living Machines conferences and their intersections with Bioinspiration & Biomimetics publications. Bioinsp. & Biomim 17 (6), 065008 (2022).

Nasser, H. K. et al. Harmony search algorithm for solving combinatorial optimization problems: Bibliometric analysis. Math. Model. Eng. Prob. 10 (3), 906 (2023).

Rusu, D. M. et al. Soft robotics: A systematic review and bibliometric analysis. Micromachines 14 (2), 359. https://doi.org/10.3390/mi14020359 (2023).

Shashwat, S. et al. A review on bioinspired strategies for an energy-efficient built environment. Energy Build. 296 , 113382 (2023).

Pires, P. M. et al. Bioactive restorative materials applied over coronal dentine—A bibliometric and critical review. Bioengineering 10 (6), 731. https://doi.org/10.3390/bioengineering10060731 (2023).

Article   PubMed   PubMed Central   CAS   Google Scholar  

Liu, H., Liao, X. & Du, B. The applications of nature-inspired meta-heuristic algorithms for decreasing the energy consumption of software-defined networks: A comprehensive and systematic literature review. Sustain. Comput.: Inform. Syst. 39 , 100895. https://doi.org/10.1016/j.suscom.2023.100895 (2023).

Hinkelman, K., Yang, Y. & Zuo, W. Design methodologies and engineering applications for ecosystem biomimicry: An interdisciplinary review spanning cyber, physical, and cyber-physical systems. Bioinsp. Biomim. 18 (2), 021001 (2023).

Raman, R., Lathabhai, H., Mandal, S., Kumar, C. & Nedungadi, P. Contribution of business research to sustainable development goals: bibliometrics and science mapping analysis. Sustainability 15 (17), 12982 (2023).

Nedungadi, P. et al. Mapping autism’s research landscape: Trends in autism screening and its alignment with sustainable development goals. Front. Psychiatry 14 , 1294254 (2024).

Auckland's SDG Mapping. University of Auckland's SDG Mapping initiative from https://www.sdgmapping.auckland.ac.nz , accessed on 4th February 2024

Elsevier's SDG Mapping - Elsevier's SDG Mapping Initiative from https://www.elsevier.com/about/partnerships/sdg-research-mapping-initiative , accessed on 4th February 2024

Raman, R., Nair, V. K., Prakash, V., Patwardhan, A. & Nedungadi, P. Green-hydrogen research: What have we achieved, and where are we going? Bibliometrics analysis. Energy Rep. 8 , 9242–9260 (2022).

Raman, R. et al. Fake news research trends, linkages to generative artificial intelligence and sustainable development goals. Heliyon 10 (3), e24727 (2024).

Raman, R. et al. ChatGPT: Literate or intelligent about UN sustainable development goals?. Plos one 19 (4), e0297521 (2024).

Raman, R., Calyam, P. & Achuthan, K. ChatGPT or bard: Who is a better certified ethical hacker?. Comput. Secur. 140 , 103804 (2024).

Rama, R., Nair, V. K., Nedungadi, P., Ray, I. & Achuthan, K. Darkweb research: Past, present, and future trends and mapping to sustainable development goals. Heliyon 9 (11), e22269 (2023).

Van Eck, N. J. & Waltman, L. Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics 84 , 523–538 (2010).

Article   PubMed   Google Scholar  

Emary, E., Zawbaa, H. M. & Hassanien, A. E. Binary gray wolf optimization approaches for feature selection. Neurocomputing 172 , 371–381 (2016).

Lin, Y., Ren, J. & Qu, X. Catalytically active nanomaterials: a promising candidate for artificial enzymes. Acc. Chem. Res. 47 (4), 1097–1105 (2014).

Parodi, A. et al. Synthetic nanoparticles functionalized with biomimetic leukocyte membranes possess cell-like functions. Nat. Nanotechnol. 8 (1), 61–68 (2013).

Article   ADS   PubMed   CAS   Google Scholar  

Zou, Q. et al. Biological photothermal nanodots based on self-assembly of peptide–porphyrin conjugates for antitumor therapy. J. Am. Chem. Soc. 139 (5), 1921–1927 (2017).

Wang, G. G., Deb, S. & Cui, Z. Monarch butterfly optimization. Neural Comput. Appl. 31 , 1995–2014 (2019).

Li, X. et al. Engineering heterogeneous semiconductors for solar water splitting. J. Mater. Chem. 3 (6), 2485–2534 (2015).

Li, X., Yu, J., Jaroniec, M. & Chen, X. Cocatalysts for selective photoreduction of CO 2 into solar fuels. Chem. Rev. 119 (6), 3962–4179 (2019).

Wang, B., Liang, W., Guo, Z. & Liu, W. Biomimetic superlyophobic and superlyophilic materials applied for oil/water separation: A new strategy beyond nature. Chem. Soc. Rev. 44 (1), 336–361 (2015).

Singh, J. et al. ‘Green’synthesis of metals and their oxide nanoparticles: Applications for environmental remediation. J. Nanobiotechnology 16 (1), 1–24 (2018).

Wang, Z. et al. Biomimetic nanoflowers by self-assembling nanozymes to induce intracellular oxidative damage against hypoxic tumors. Nat. Commun. 9 (1), 3334 (2018).

Article   ADS   PubMed   PubMed Central   Google Scholar  

Gao, S. et al. Nanocatalytic tumor therapy by biomimetic dual inorganic nanozyme-catalyzed cascade reaction. Adv. Sci. 6 (3), 1801733 (2019).

Su, B., Tian, Y. & Jiang, L. Bioinspired interfaces with superwettability: From materials to chemistry. J. Am. Chem. Soc. 138 (6), 1727–1748 (2016).

Zhang, X., Li, Z., Liu, K. & Jiang, L. Bioinspired multifunctional foam with self-cleaning and oil/water separation. Adv. Funct. Mater. 23 (22), 2881–2886 (2013).

Jang, S. C. et al. Bioinspired exosome-mimetic nanovesicles for targeted delivery of chemotherapeutics to malignant tumors. ACS Nano 7 (9), 7698–7710 (2013).

Yong, T. et al. Tumor exosome-based nanoparticles are efficient drug carriers for chemotherapy. Nat. Commun. 10 (1), 3838 (2019).

Cheng, G. et al. Self-assembly of extracellular vesicle-like metal–organic framework nanoparticles for protection and intracellular delivery of biofunctional proteins. J. Am. Chem. Soc. 140 (23), 7282–7291 (2018).

Yang, J. et al. Eardrum-inspired active sensors for self-powered cardiovascular system characterization and throat-attached anti-interference voice recognition. Adv. Mater. 27 (8), 1316–1326 (2015).

Sezer, N. & Koç, M. A comprehensive review on the state-of-the-art of piezoelectric energy harvesting. Nano Energy 80 , 105567 (2021).

Zhao, D. et al. Cellulose-based flexible functional materials for emerging intelligent electronics. Adv. Mater. 33 (28), 2000619 (2021).

Chortos, A., Liu, J. & Bao, Z. Pursuing prosthetic electronic skin. Nat. mater. 15 (9), 937–950 (2016).

Kim, J. et al. Stretchable silicon nanoribbon electronics for skin prosthesis. Nat. Commun. 5 (1), 5747 (2014).

Pang, C. et al. Highly skin-conformal microhairy sensor for pulse signal amplification. Adv. Mater. 27 (4), 634–640 (2015).

Yu, Z., Zhou, P., Pan, W., Li, N. & Tang, B. A biomimetic nanoreactor for synergistic chemiexcited photodynamic and starvation therapy against tumor metastasis. Nat. Commun. 9 (1), 5044 (2018).

Yang, W. et al. Albumin-bioinspired Gd: CuS nanotheranostic agent for in vivo photoacoustic/magnetic resonance imaging-guided tumor-targeted photothermal therapy. ACS Nano 10 (11), 10245–10257 (2016).

Wang, Z. et al. Biomineralization-inspired synthesis of copper sulfide–ferritin nanocages as cancer theranostics. ACS Nano 10 (3), 3453–3460 (2016).

Mirjalili, S. & Lewis, A. The whale optimization algorithm. Adv. Eng. Softw. 95 , 51–67 (2016).

Mirjalili, S. et al. Salp Swarm Algorithm: A bioinspired optimizer for engineering design problems. Adv. Eng. Softw. 114 , 163–191 (2017).

Mirjalili, S. Moth-flame optimization algorithm: A novel nature-inspired heuristic paradigm. Knowl. Based Syst. 89 , 228–249 (2015).

Truby, R. L. & Lewis, J. A. Printing soft matter in three dimensions. Nature 540 (7633), 371–378 (2016).

Ozbolat, I. T. & Hospodiuk, M. Current advances and future perspectives in extrusion-based bioprinting. Biomater. 76 , 321–343 (2016).

Mannoor, M. S. et al. 3D printed bionic ears. Nano Lett. 13 (6), 2634–2639 (2013).

Article   ADS   PubMed   PubMed Central   CAS   Google Scholar  

Kennedy, E. B. & Marting, T. A. Biomimicry: Streamlining the front end of innovation for environmentally sustainable products. Res. Technol. Manage. 59 (4), 40–48 (2016).

Chazhaev, M. Economic potential of biotechnologies: challenges and windows of opportunity. BIO Web Conf. 76 , 10002 (2023).

Kasatova, A. A., Vagizova, V. I. & Tufetulov, A. M. Stages of biotechnology commercialization in the system of interaction between financial and innovative industrial structures. Acad. Strateg. Manag. J. 15 , 191 (2016).

Rovalo, E., McCardle, J., Smith, E. & Hooker, G. Growing the practice of biomimicry: Opportunities for mission-based organisations based on a global survey of practitioners. Technol. Anal. Strateg. Manag. 32 (1), 71–87 (2020).

Broeckhoven, C. & Winters, S. Biomimethics: a critical perspective on the ethical implications of biomimetics in technological innovation. Bioinspir. Biomim. 18 (5), 053001 (2023).

Article   ADS   Google Scholar  

Biomimicry Innovation Lab. The State of Nature-Inspired Innovation in the UK. Retrieved from https://www.biomimicryinnovationlab.com/blog/the-state-of-nature-inspired-innovation-in-the-uk (2023).

Weerasinghe, D. U., Perera, S. & Dissanayake, D. Application of biomimicry for sustainable functionalization of textiles: Review of current status and prospectus. Textile Res. J. 89 (22), 4282–4294 (2019).

Madmar, S., Shah, M. Z., Matusin, A. M. R. A. & Ilhan, A. A. Applications of biomimicry to urban planning: interrogating the relevance of emerging approaches to design cities by inspiring from nature. IOP Conf. Ser.: Earth Environ. Sci. 1274 (1), 012015 (2023).

Letrud, K. & Hernes, S. Affirmative citation bias in scientific myth debunking: A three-in-one case study. PLoS One 14 (9), e0222213 (2019).

McCain, K. W. Obliteration by incorporation. Beyond bibliometrics: Harnessing multidimensional indicators of scholarly impact. J. Scientometr. Res. 4 (1), 129–149 (2014).

Benyus, J. M. (1997). Biomimicry: Innovation inspired by nature.

Donthu, N., Kumar, S., Pandey, N., Pandey, N., & Mishra, A. (2021). Mapping the electronic word-of-mouth (eWOM) research: A systematic review and bibliometric analysis. J. Bus. Res. , 135 , 758–773.

Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016). Biomimetic 4D printing. Nature materials , 15 (4), 413–418.

Lurie-Luke, E. Product and technology innovation: What can biomimicry inspire?. Biotechnology advances , 32 (8), 1494–1505 (2014).

Download references

This research received no specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

Author information

Authors and affiliations.

Amrita School of Business, Amritapuri, Amrita Vishwa Vidyapeetham, Kollam, Kerala, India

Raghu Raman

Amrita School of Business, Amrita Vishwa Vidyapeetham, Coimbatore, Tamil Nadu, India

Aswathy Sreenivasan & M. Suresh

Amrita School of Computing, Amritapuri, Amrita Vishwa Vidyapeetham, Kollam, Kerala, India

Prema Nedungadi

You can also search for this author in PubMed   Google Scholar

Contributions

R.R.—Conceptualization; supervision; methodology; data curation; visualization; writing—original draft; and writing—review and editing. A.S.—Data curation; Writing—original draft; and Writing—review and editing. M.S.—writing—original draft; and writing—review and editing. P.N.—Data curation; writing—original draft; and writing—review and editing.

Corresponding author

Correspondence to Raghu Raman .

Ethics declarations

Competing interests.

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher's note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ .

Reprints and permissions

About this article

Cite this article.

Raman, R., Sreenivasan, A., Suresh, M. et al. Mapping biomimicry research to sustainable development goals. Sci Rep 14 , 18613 (2024). https://doi.org/10.1038/s41598-024-69230-9

Download citation

Received : 28 April 2024

Accepted : 01 August 2024

Published : 10 August 2024

DOI : https://doi.org/10.1038/s41598-024-69230-9

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Sustainable development goal
• Network map
• Thematic areas

By submitting a comment you agree to abide by our Terms and Community Guidelines . If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Sign up for the Nature Briefing: Anthropocene newsletter — what matters in anthropocene research, free to your inbox weekly.

More From Forbes

5 steps to make content marketing your top channel.

• Share to Facebook
• Share to Twitter
• Share to Linkedin

CEO and Founder of Sosemo , an award-winning digital marketing agency that specializes in search marketing and paid social media marketing.

You can achieve meaningful ROI through stand-alone SEO efforts, but for sustained and robust growth, it's crucial to complement SEO with a comprehensive content marketing strategy. When seamlessly integrated, SEO and content marketing have the potential to emerge as the most effective digital channels, primarily because they're not reliant on continuous spending and they grow organically over time. Even if content production halts, ROI persists—a unique advantage over even organic social media, which hinges on fleeting viral moments that dissipate over time.

Contrary to common misconceptions, an abundance of content isn't mandatory. The key lies in strategic topic selection rather than random choices. Opting for a strategic approach minimizes content production efforts while maximizing ROI.

Here are five steps to help you plan and execute a content marketing strategy that delivers maximum ROI without unnecessary investments.

1. Select Topics Based On Keyword Research

Search engines can be likened to a vast database of intentions. Therefore, keyword research is market research. Literally tens of thousands of unbiased respondents are raising their hands through their search behaviors and telling us what information, products and services they are interested in. It makes sense to develop content based on an analysis of your target audience’s interests, right?

Elevating this approach involves conducting a competitive analysis to pinpoint keywords that are more feasible to rank for in the organic search results. Taking it a step further, you can conduct a gap analysis to identify keywords that generate substantial search volume but return less content to compete within the search results. Subsequently, you can determine content topics that align with your target keywords.

2. Optimize Content For Target Keywords

When crafting optimized content, there are numerous best practices to consider. These include incorporating target keywords in headers, aiming for a keyword density of 10%, and featuring target keywords in both the opening and closing sentences. The list goes on. However, in a scenario where all other ranking factors are equal, the crucial determinant for ranking higher than the top sites is having better-optimized content. This underscores the importance of selecting content topics based on keywords with both high search volume and lower competition, simplifying the content optimization process by loosening requirements.

Additionally, this approach allows optimized content to provide a more natural reading experience without the need for excessive keyword stuffing, preserving the clarity of your messaging and safeguarding your brand value.

3. Set Up A Resource Center Vs. A Blog

The challenge with a blog lies in the chronological ordering of articles based on their publication date. While new articles receive a freshness boost in search results, older ones are typically devalued and tend to lose visibility over time. Pagination and organization by month and year are the main culprits that signal the search engines to devalue articles organized in this manner. Articles buried deep within pagination or categorized with older dates may even be excluded altogether from search indexes due to storage limitations.

A more effective approach is to create a resource center featuring evergreen content organized by topic. Resource center articles tend to have a longer shelf life in the search results because older content isn't devalued in the same way, offering an effective method for maintaining search visibility over time.

4. Drive Links To Articles With Optimized Anchor Text

Link building has historically garnered a negative reputation, but the latest generation of link exchanges poses minimal risk to a website's ranking potential, unlike in the past. Additionally, when executed correctly, a comprehensive link-building campaign undeniably increases visibility.

Requesting that specific keywords be included within the anchor text used by third-party sites linking to your website remains highly impactful for increasing the search engine rankings for those target keywords. However, you must exercise caution to avoid overdoing this, as this may trigger red flags with the search engines that may lead to a ranking penalty or, more likely, cause the engines to disregard the link.

Considering the quality of the sites linking to yours is crucial. The timing and quantity of links also play a role, with certain thresholds potentially raising red flags. Nevertheless, a skilled practitioner can strategically execute a campaign with minimal risk. For those with ambitious growth goals, incorporating a well-thought-out link-building strategy into your plan is advisable.

5. Avoid The 'Load More' Functionality

The "load more" functionality, a content management system plug-in that should have been phased out years ago, poses challenges for search engine accessibility. If you opt for the "load more" functionality to enhance usability, be aware that there's a significant chance that the content below the initial load will be inaccessible to the search engines and won't be included in the search results. A simple test involves copying and pasting a block of content from below the first load, enclosing it in quotes and conducting a Google search. If the page doesn't appear in the search results, the content is inaccessible.

While there are workaround solutions to mitigate the issue, such as using a sitemap and placing pagination above the function, organizing articles by topic instead of relying on a long-scrolling page is a more effective approach for organic search engine visibility.

If strategically planned and executed, content marketing has the potential to yield a higher ROI compared to other digital channels, particularly as time progresses beyond the first year. This is because the visibility of content in the organic search results doesn't require continuous investment and tends to grow over time. However, achieving this level of success requires a meticulous selection of content topics based on comprehensive keyword research and a competitive analysis.

Make sure you optimize articles for target keywords following SEO best practices, and address any accessibility issues that might hinder search engine performance. You also need to structure content in a way that maximizes its value in the eyes of search engines, positioning it as evergreen and enduring. Additionally, carefully plan and execute an effective strategy for link building to enhance search engine visibility.

Forbes Agency Council is an invitation-only community for executives in successful public relations, media strategy, creative and advertising agencies. Do I qualify?

• Editorial Standards
• Reprints & Permissions

EDITORIAL article

Editorial: molecular profiles of tunneling nanotubes (tnts) in human diseases-from 2d cultures to complex tissue.

• 1 Faculty of Medicine, Institute of Cell Biology, University of Ljubljana, Ljubljana, Slovenia
• 2 University of Caen Normandy, National Center for Scientific Research, Normandy University, Unit of Imaging and Therapeutic Strategies for Cancers and Cerebral Tissues (ISTCT)-UMR6030, GIP CYCERON, Caen, France
• 3 Department of Pathology, Caen University Hospital, Caen, France
• 4 Department of Translational Biomedicine and Neuroscience (DiBraiN), Unit of Human Anatomy and Histology, University of Bari School of Medicine, Bari, Italy
• 5 School of Medicine and Surgery, University of Milano-Bicocca, Monza, Italy

Editorial on the Research Topic Molecular profiles of tunneling nanotubes (TNTs) in human diseases-from 2D cultures to complex tissue

1 Introduction

Tunneling nanotubes (TNTs) are a type of intercellular communication that has been growing in importance since their discovery by Rustom and colleagues 20 years ago ( Rustom et al., 2004 ). TNTs are tubular membrane nanostructures that facilitate direct communication between cells over distances of 10–200 µm. TNTs can range in diameter from 5 to 1,000 nm. They allow for the transfer of various intracellular components, including organelles, proteins, genetic material, and vesicles, between connected cells. TNTs have been observed in various cell types and play important roles in both physiological and pathological conditions, being implicated in various human diseases ( Dubois et al., 2020 ; Khattar et al., 2022 ). In tumors, TNTs allow the transfer of oncogenic molecules, such as proteins and genetic material, between cancer cells, contributing to tumor growth, metastasis, and resistance to therapy. They can also facilitate the exchange of signaling molecules between cancer cells and non-tumoral cells in the tumor microenvironment, influencing tumor progression ( Sisakht et al., 2023 ). TNTs also contribute to non-tumoral disease progression and the propagation of pathology, notably throughout the brain by the spread of α-synuclein mis-folds and aggregates implicated in neurodegenerative Parkinson’s disease ( Chakraborty et al., 2023 ). Certain viruses, including HIV, herpes simplex virus, and respiratory syncytial virus, exploit TNTs for intercellular transfer and dissemination within host tissues, acting as conduits for viral particles to move between cells and aiding in viral spread and evasion of the immune system ( Okafo et al., 2017 ; Wang et al., 2023 ). A crucial role of TNTs during human brain vascularization and tumoral neo-angiogenesis has also been suggested ( Errede et al., 2018 ), as well as their implication in cardiovascular diseases such as atherosclerosis and cardiac ischemia-reperfusion injury ( Lakota et al., 2011 ; Girolamo et al., 2023 ). These unique insights into the structure and function of TNTs have been the result of in vitro and in vivo models.

2 Commentary on the articles of the Research Topic

The current Research Topic features a collection of four manuscripts, consisting of a mini-review and three research articles. The manuscripts present data ranging from mechanical and structural features of TNTs to their functional role in human diseases and describe a membrane reshaping proteins such as septins. Simone et al. investigated the role of TNTs in glioblastoma (GBM), showing that glial fibrillary acid protein (GFAP), a representative protein of intermediate filaments in glial cells, is a key structural and functional protein of TNTs formed between distant human-derived GBM cells. Moreover, GFAP interacts with mitochondria during the intercellular transfer mediated by TNTs. This event could be involved in the well-known apoptotic escape mechanism that occurs in GBM cells. Given that the formation of TNTs involved the cytoskeleton rearrangements, a potential supportive role could be played by dynamic protein assemblies like septins, regarded as the fourth element of the cytoskeleton. The effect of septins on the membranes is either through direct interactions or through their association with other cytoskeletal elements, i.e., actin filaments and microtubules, or even through the endocytic-sorting complex required for transport complex (ESCRT). Benoit et al. discussed septins in detail. Considering that the formation of TNTs occurs in a complex microenvironment, where not only diseased but also healthy cells are present, Resnik et al. established a novel urothelial cancer-normal co-culture model that is useful to investigate the role of TNTs in cancer progression and recurrence, with the ultimate aim of developing TNT-based cancer therapies. Similar to the discovery of the intermediate filament protein GFAP in TNTs by Simone et al. ; Resnik et al. found the intermediate filament protein cytokeratin 7 as a component of TNTs in normal and cancer urothelial cells. The novelty was the identification of the tri-cytoskeletal composition of the TNTs. In the context of the rather fragile nature of TNTs, it is important to emphasize that TNTs are dynamic and physically elastic structures, supported by the work of Resnik et al. ; Li et al. In this context, Li et al. have established methods useful for evaluating the mechanical properties of TNTs. This is of particular importance for the development of new therapeutic strategies based on the destruction or exploitation of TNTs.

3 The future of TNT research: open questions and challenges

Further research is needed to fully understand the role of TNTs in diseases and to explore their potential as therapeutic targets or diagnostic markers. One possible strategy that can be pursued is to inhibit or disrupt TNT formation using inhibitors of actin polymerization. On the other hand, a promising alternative could be the exploitation of intercellular communication in TNTs. Indeed, TNTs facilitate the transfer of drugs and drug delivery systems (i.e., nanoparticles) between connected cells ( Formicola et al., 2019 ). Next, the fundamental question regarding identification markers for TNTs needs to be addressed. Two decades of TNT research have shown that the molecular, structural, and biophysical identity of TNTs is very diverse and dependent on the cell environment, making it difficult to find a specific marker to unambiguously identify TNTs from other cellular structures such as filopodia and cytonemes. In vivo , the identification of TNTs is particularly challenging due to the complexity of the tissue. High-resolution microscopy techniques such as electron microscopy and super-resolution microscopy are required, but these techniques have limitations due to the fragile and transient nature of TNTs and can be technically challenging. In addition to microscopy, interdisciplinary approaches integrating bioinformatics and computational modelling can help predict the behavior of TNTs and their role in cellular networks. CRISPR/Cas9 and other gene-editing technologies can be used to manipulate genes involved in TNT formation and function, potentially providing future insights into their biological roles.

4 Conclusion

Supported by recent studies that have clarified many of the biological, biomechanical, and pharmacological aspects of TNTs, these studies further extend the knowledge of these cellular nanostructures through original in vitro and ex vivo studies, opening up new fields of analysis on the mechanistic dynamics and multiple roles of TNTs. The combination of in vitro , ex vivo , and in vivo models, together with advanced imaging and molecular techniques and interdisciplinary approaches, is essential for a comprehensive understanding of TNTs. Each model offers unique advantages that, when integrated, can provide a detailed and clinically relevant picture of the role of TNTs in health and disease.

Author contributions

NR: Writing–review and editing. GL: Writing–review and editing. ME: Writing–original draft. FR: Writing–original draft. DV: Writing–original draft.

The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. NR is supported by ARIS, from Grant No. J3-7494 and P3- 0108, and the MRIC UL IP-0510 Infrastructure program.

Conflict of interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Chakraborty, R., Nonaka, T., Hasegawa, M., and Zurzolo, C. (2023). Tunnelling nanotubes between neuronal and microglial cells allow bi-directional transfer of α-Synuclein and mitochondria. Cell Death Dis. 14, 329. doi:10.1038/s41419-023-05835-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Dubois, F., Benard, M., Jean-Jacques, B., Schapman, D., Roberge, H., Lebon, A., et al. (2020). Investigating tunneling nanotubes in cancer cells: guidelines for structural and functional studies through cell imaging. Biomed. Res. Int. 2020, 2701345. doi:10.1155/2020/2701345

Errede, M., Mangieri, D., Longo, G., Girolamo, F., de Trizio, I., Vimercati, A., et al. (2018). Tunneling nanotubes evoke pericyte/endothelial communication during normal and tumoral angiogenesis. Fluids Barriers Cns 15, 28. doi:10.1186/s12987-018-0114-5

Formicola, B., D'Aloia, A., Dal Magro, R., Stucchi, S., Rigolio, R., Ceriani, M., et al. (2019). Differential exchange of multifunctional liposomes between glioblastoma cells and healthy astrocytes via tunneling nanotubes. Front. Bioeng. Biotechnol. 7, 403. doi:10.3389/fbioe.2019.00403

Girolamo, F., Lim, Y. P., Virgintino, D., Stonestreet, B. S., and Chen, X. F. (2023). Inter-alpha inhibitor proteins modify the microvasculature after exposure to hypoxia-ischemia and hypoxia in neonatal rats. Int. J. Mol. Sci. 24, 6743. doi:10.3390/ijms24076743

Khattar, K. E., Safi, J., Rodriguez, A.-M., and Vignais, M.-L. (2022). Intercellular communication in the brain through tunneling nanotubes. Cancers 14, 1207. doi:10.3390/cancers14051207

Lakota, K., Resnik, N., Mrak-Poljsak, K., Sodin-Semrl, S., and Veranic, P. (2011). Colocalization of serum amyloid A with microtubules in human coronary artery endothelial cells. J. Biomed. Biotechnol. 2011, 528276. doi:10.1155/2011/528276

Okafo, G., Prevedel, L., and Eugenin, E. (2017). Tunneling nanotubes (TNT) mediate long-range gap junctional communication: implications for HIV cell to cell spread. Sci. Rep. 7, 16660. doi:10.1038/s41598-017-16600-1

Rustom, A., Saffrich, R., Markovic, I., Walther, P., and Gerdes, H. H. (2004). Nanotubular highways for intercellular organelle transport. Science 303, 1007–1010. doi:10.1126/science.1093133

Sisakht, A. K., Malekan, M., Ghobadinezhad, F., Firouzabadi, S. N. M., Jafari, A., Mirazimi, S. M. A., et al. (2023). Cellular conversations in glioblastoma progression, diagnosis and treatment. Cell. Mol. Neurobiol. 43, 585–603. doi:10.1007/s10571-022-01212-9

Wang, J., Shang, K. T., Ma, Q. H., Dong, Z. Y., Chen, Y. H., and Yao, Y. F. (2023). Herpes simplex virus type 1 infection induces the formation of tunneling nanotubes. Microorganisms 11, 1916. doi:10.3390/microorganisms11081916

Keywords: cancer, in vitro models, glioblastoma, tumour, tunneling nanotubes

Citation: Resnik N, Levallet G, Errede M, Re F and Virgintino D (2024) Editorial: Molecular profiles of tunneling nanotubes (TNTs) in human diseases-from 2D cultures to complex tissue. Front. Cell Dev. Biol. 12:1461453. doi: 10.3389/fcell.2024.1461453

Received: 08 July 2024; Accepted: 29 July 2024; Published: 14 August 2024.

Edited and reviewed by:

Copyright © 2024 Resnik, Levallet, Errede, Re and Virgintino. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Nataša Resnik, [email protected] ; Francesca Re, [email protected]

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

Information

• Author Services

Initiatives

You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.

All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess .

Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.

Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.

Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.

Original Submission Date Received: .

• Active Journals
• Find a Journal
• Proceedings Series
• For Authors
• For Reviewers
• For Editors
• For Librarians
• For Publishers
• For Societies
• For Conference Organizers
• Open Access Policy
• Institutional Open Access Program
• Special Issues Guidelines
• Editorial Process
• Research and Publication Ethics
• Article Processing Charges
• Testimonials
• Preprints.org
• SciProfiles
• Encyclopedia

Article Menu

• Subscribe SciFeed
• Recommended Articles
• Google Scholar
• on Google Scholar
• Table of Contents

Find support for a specific problem in the support section of our website.

Please let us know what you think of our products and services.

Visit our dedicated information section to learn more about MDPI.

JSmol Viewer

Host gut-derived probiotic, exiguobacterium acetylicum g1-33, improves growth, immunity, and resistance to vibrio harveyi in hybrid grouper ( epinephelus fuscoguttatus ♀ × epinephelus lanceolatus ♂), 1. introduction, 2. materials and methods, 2.1. ethics statement, 2.2. evaluation of probiotic application potential, 2.3. diet preparation and feeding program, 2.4. growth performance and survival rate, 2.5. sample collection, 2.6. gene expression detection, 2.7. biochemical assays, 2.8. histological examinations, 2.9. challenge test, 2.10. data analysis, 3.1. application potential of e. acetylicum g1-33, 3.2. growth performance, 3.3. expression of immune-related genes after the feeding program, 3.4. biochemical analysis, 3.5. histology, 3.6. hybrid group sr after v. harveyi challenge, 3.7. expression of immune-related genes after v. harveyi challenge, 4. discussion, 5. conclusions, supplementary materials, author contributions, data availability statement, conflicts of interest.

• Subasinghe, R.; Soto, D.; Jia, J. Global Aquaculture and Its Role in Sustainable Development. Rev. Aquac. 2009 , 1 , 2–9. [ Google Scholar ] [ CrossRef ]
• Klinger, D.; Naylor, R. Searching for Solutions in Aquaculture: Charting a Sustainable Course. Annu. Rev. Environ. Resour. 2012 , 37 , 247–276. [ Google Scholar ] [ CrossRef ]
• Abdel-Latif, H.M.R.; Chaklader, M.R.; Shukry, M.; Ahmed, H.A.; Khallaf, M.A. A Multispecies Probiotic Modulates Growth, Digestive Enzymes, Immunity, Hepatic Antioxidant Activity, and Disease Resistance of Pangasianodon hypophthalmus Fingerlings. Aquaculture 2023 , 563 , 738948. [ Google Scholar ] [ CrossRef ]
• Mukherjee, A.; Chandra, G.; Ghosh, K. Single or Conjoint Application of Autochthonous Bacillus Strains as Potential Probiotics: Effects on Growth, Feed Utilization, Immunity and Disease Resistance in Rohu, Labeo rohita (Hamilton). Aquaculture 2019 , 512 , 734302. [ Google Scholar ] [ CrossRef ]
• Shi, L.H.; Balakrishnan, K.; Thiagarajah, K.; Mohd Ismail, N.I.; Yin, O.S. Beneficial Properties of Probiotics. Trop. Life Sci. Res. 2016 , 27 , 73–90. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Rohani, M.F.; Islam, S.M.; Hossain, M.K.; Ferdous, Z.; Siddik, M.A.; Nuruzzaman, M.; Padeniya, U.; Brown, C.; Shahjahan, M. Probiotics, Prebiotics and Synbiotics Improved the Functionality of Aquafeed: Upgrading Growth, Reproduction, Immunity and Disease Resistance in Fish. Fish Shellfish. Immunol. 2022 , 120 , 569–589. [ Google Scholar ] [ CrossRef ]
• Lubis, A.R.; Sumon, M.A.A.; Dinh-Hung, N.; Dhar, A.K.; Delamare-Deboutteville, J.; Kim, D.; Shinn, A.P.; Kanjanasopa, D.; Permpoonpattana, P.; Doan, H.V.; et al. Review of Quorum-quenching Probiotics: A Promising Non-antibiotic-based Strategy for Sustainable Aquaculture. J. Fish Dis. 2024 , 47 , e13941. [ Google Scholar ] [ CrossRef ]
• Dang, Y.; Sun, Y.; Zhou, Y.; Men, X.; Wang, B.; Li, B.; Ren, Y. Effects of Probiotics on Growth, the Toll-like Receptor Mediated Immune Response and Susceptibility to Aeromonas salmonicida Infection in Rainbow Trout Oncorhynchus mykiss . Aquaculture 2022 , 561 , 738668. [ Google Scholar ] [ CrossRef ]
• He, X.; Abakari, G.; Tan, H.; Liu, W.; Luo, G. Effects of Different Probiotics ( Bacillus subtilis ) Addition Strategies on a Culture of Litopenaeus vannamei in Biofloc Technology (BFT) Aquaculture System. Aquaculture 2023 , 566 , 739216. [ Google Scholar ] [ CrossRef ]
• Mohammadi, G.; Rafiee, G.; Tavabe, K.R.; Abdel-Latif, H.M.R.; Dawood, M.A.O. The Enrichment of Diet with Beneficial Bacteria (Single- or Multi-Strain) in Biofloc System Enhanced the Water Quality, Growth Performance, Immune Responses, and Disease Resistance of Nile Tilapia ( Oreochromis niloticus ). Aquaculture 2021 , 539 , 736640. [ Google Scholar ] [ CrossRef ]
• Zibiene, G.; Zibas, A. Impact of Commercial Probiotics on Growth Parameters of European Catfish ( Silurus glanis ) and Water Quality in Recirculating Aquaculture Systems. Aquac. Int. 2019 , 27 , 1751–1766. [ Google Scholar ] [ CrossRef ]
• Naylor, R.L.; Goldburg, R.J.; Primavera, J.H.; Kautsky, N.; Beveridge, M.C.M.; Clay, J.; Folke, C.; Lubchenco, J.; Mooney, H.; Troell, M. Effect of Aquaculture on World Fish Supplies. Nature 2000 , 405 , 1017–1024. [ Google Scholar ] [ CrossRef ]
• Ye, G.; Dong, X.; Yang, Q.; Chi, S.; Liu, H.; Zhang, H.; Tan, B.; Zhang, S. A Formulated Diet Improved Digestive Capacity, Immune Function and Intestinal Microbiota Structure of Juvenile Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂) When Compared with Chilled Trash Fish. Aquaculture 2020 , 523 , 735230. [ Google Scholar ] [ CrossRef ]
• Yanuhar, U.; Nurcahyo, H.; Widiyanti, L.; Junirahma, N.S.; Caesar, N.R.; Sukoso, S. In Vivo Test of Vibrio alginolyticus and Vibrio harveyi Infection in the Humpback Grouper ( Cromileptes altivelis ) from East Java Indonesia. Vet. World 2022 , 15 , 1269–1282. [ Google Scholar ] [ CrossRef ]
• Shapawi, R.; Abdullah, F.C.; Senoo, S.; Mustafa, S. Nutrition, Growth and Resilience of Tiger Grouper ( Epinephelus fuscoguttatus ) × Giant Grouper ( Epinephelus lanceolatus ) Hybrid—A Review. Rev. Aquac. 2019 , 11 , 1285–1296. [ Google Scholar ] [ CrossRef ]
• Dennis, L.P.; Ashford, G.; Thai, T.Q.; Van In, V.; Ninh, N.H.; Elizur, A. Hybrid Grouper in Vietnamese Aquaculture: Production Approaches and Profitability of a Promising New Crop. Aquaculture 2020 , 522 , 735108. [ Google Scholar ] [ CrossRef ]
• Qin, Y.; Liu, J.; Liu, W.; Shi, H.; Jia, A.; Lu, Y.; Liu, X. First Isolation and Identification of Red-Grouper Nervous Necrosis Virus (RGNNV) from Adult Hybrid Hulong Grouper ( Epinephelus fuscoguttatus × Epinephelus lanceolatus ) in China. Aquaculture 2020 , 529 , 735662. [ Google Scholar ] [ CrossRef ]
• Shen, G.M.; Shi, C.Y.; Fan, C.; Jia, D.; Wang, S.Q.; Xie, G.S.; Li, G.Y.; Mo, Z.L.; Huang, J. Isolation, Identification and Pathogenicity of Vibrio harveyi , the Causal Agent of Skin Ulcer Disease in Juvenile Hybrid Groupers Epinephelus fuscoguttatus × Epinephelus lanceolatus . J. Fish Dis. 2017 , 40 , 1351–1362. [ Google Scholar ] [ CrossRef ]
• Li, J.; Wu, Z.-B.; Zhang, Z.; Zha, J.-W.; Qu, S.-Y.; Qi, X.-Z.; Wang, G.-X.; Ling, F. Effects of Potential Probiotic Bacillus velezensis K2 on Growth, Immunity and Resistance to Vibrio harveyi Infection of Hybrid Grouper ( Epinephelus lanceolatus ♂ × E. fuscoguttatus ♀). Fish Shellfish. Immunol. 2019 , 93 , 1047–1055. [ Google Scholar ] [ CrossRef ]
• Jinendiran, S.; Boopathi, S.; Sivakumar, N.; Selvakumar, G. Functional Characterization of Probiotic Potential of Novel Pigmented Bacterial Strains for Aquaculture Applications. Probiotics Antimicrob. Proteins 2019 , 11 , 186–197. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Xie, G.; Zhang, M.; Zhong, Z.; Zhu, Y.; Fan, X.; Li, M.; Xing, K.; Shu, H. Functional Genomic Characterization Reveals the Probiotic Tendency and Safety Assessment of Exiguobacterium acetylicum G1–33 Isolated from the Gut of the Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × E. lanceolatus ♂). Aquac. Rep. 2024 , 36 , 102127. [ Google Scholar ] [ CrossRef ]
• Zhu, Y.; Li, W.; Zhang, M.; Zhong, Z.; Zhou, Z.; Han, J.; Zhang, C.; Yang, J.; Wu, Y.; Shu, H. Screening of Host Gut-Derived Probiotics and Effects of Feeding Probiotics on Growth, Immunity, and Antioxidant Enzyme Activity of Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × E. lanceolatus ♂). Fish Shellfish. Immunol. 2023 , 136 , 108700. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Liu, S.; Wang, S.; Cai, Y.; Li, E.; Ren, Z.; Wu, Y.; Guo, W.; Sun, Y.; Zhou, Y. Beneficial Effects of a Host Gut-Derived Probiotic, Bacillus pumilus , on the Growth, Non-Specific Immune Response and Disease Resistance of Juvenile Golden Pompano, Trachinotus ovatus . Aquaculture 2020 , 514 , 734446. [ Google Scholar ] [ CrossRef ]
• Zhang, Y.; Liang, X.-F.; He, S.; Feng, H.; Li, L. Dietary Supplementation of Exogenous Probiotics Affects Growth Performance and Gut Health by Regulating Gut Microbiota in Chinese Perch ( Siniperca chuatsi ). Aquaculture 2022 , 547 , 737405. [ Google Scholar ] [ CrossRef ]
• El-Kady, A.A.; Magouz, F.I.; Mahmoud, S.A.; Abdel-Rahim, M.M. The Effects of Some Commercial Probiotics as Water Additive on Water Quality, Fish Performance, Blood Biochemical Parameters, Expression of Growth and Immune-Related Genes, and Histology of Nile Tilapia ( Oreochromis niloticus ). Aquaculture 2022 , 546 , 737249. [ Google Scholar ] [ CrossRef ]
• Ren, Z.; Wang, S.; Cai, Y.; Wu, Y.; Tian, L.; Wang, S.; Jiang, L.; Guo, W.; Sun, Y.; Zhou, Y. Effects of Dietary Mannan Oligosaccharide Supplementation on Growth Performance, Antioxidant Capacity, Non-Specific Immunity and Immune-Related Gene Expression of Juvenile Hybrid Grouper ( Epinephelus lanceolatus ♂ × Epinephelus fuscoguttatus ♀). Aquaculture 2020 , 523 , 735195. [ Google Scholar ] [ CrossRef ]
• Lulijwa, R.; Rupia, E.J.; Alfaro, A.C. Antibiotic Use in Aquaculture, Policies and Regulation, Health and Environmental Risks: A Review of the Top 15 Major Producers. Rev. Aquac. 2020 , 12 , 640–663. [ Google Scholar ] [ CrossRef ]
• Gutiérrez Falcón, A.; Padilla, D.; Real, F.; Ramos Sosa, M.J.; Acosta-Hernández, B.; Sánchez Henao, A.; García-Álvarez, N.; Rosario Medina, I.; Silva Sergent, F.; Déniz, S.; et al. Screening of New Potential Probiotics Strains against Photobacterium damselae Subsp. piscicida for Marine Aquaculture. Animals 2021 , 11 , 2029. [ Google Scholar ] [ CrossRef ]
• Adenaya, A.; Berger, M.; Brinkhoff, T.; Ribas-Ribas, M.; Wurl, O. Usage of Antibiotics in Aquaculture and the Impact on Coastal Waters. Mar. Pollut. Bull. 2023 , 188 , 114645. [ Google Scholar ] [ CrossRef ]
• Li, S.; Shi, W.; Liu, W.; Li, H.; Zhang, W.; Hu, J.; Ke, Y.; Sun, W.; Ni, J. A Duodecennial National Synthesis of Antibiotics in China’s Major Rivers and Seas (2005–2016). Sci. Total Environ. 2018 , 615 , 906–917. [ Google Scholar ] [ CrossRef ]
• Wang, A.; Ran, C.; Wang, Y.; Zhang, Z.; Ding, Q.; Yang, Y.; Olsen, R.E.; Ringø, E.; Bindelle, J.; Zhou, Z. Use of Probiotics in Aquaculture of China—A Review of the Past Decade. Fish Shellfish. Immunol. 2019 , 86 , 734–755. [ Google Scholar ] [ CrossRef ]
• Kaktcham, P.M.; Temgoua, J.-B.; Zambou, F.N.; Diaz-Ruiz, G.; Wacher, C.; Pérez-Chabela, M.D.L. In Vitro Evaluation of the Probiotic and Safety Properties of Bacteriocinogenic and Non-Bacteriocinogenic Lactic Acid Bacteria from the Intestines of Nile Tilapia and Common Carp for Their Use as Probiotics in Aquaculture. Probiotics Antimicrob. Proteins 2018 , 10 , 98–109. [ Google Scholar ] [ CrossRef ]
• Das, S.K.; Xiang, T.W.; Noor, N.M.; De, M.; Mazumder, S.K.; Goutham-Bharathi, M.P. Temperature Physiology in Grouper (Epinephelinae: Serranidae) Aquaculture: A Brief Review. Aquac. Rep. 2021 , 20 , 100682. [ Google Scholar ] [ CrossRef ]
• Sutthinon, P.; Thongprajukaew, K.; Saekhow, S.; Ketmanee, R. Juvenile Hybrid Grouper ( Epinephelus coioides × E. lanceolatus ) Are Euryhaline and Can Grow in a Wide Range of Salinities. Aquac. Int. 2015 , 23 , 671–682. [ Google Scholar ] [ CrossRef ]
• Kar, N.; Ghosh, K. Enzyme Producing Bacteria in the Gastrointestinal Tracts of Labeo rohita (Hamilton) and Channa punctatus (Bloch). Turk. J. Fish. Aquat. Sci. 2008 , 8 , 115–120. [ Google Scholar ]
• Shen, W.-Y.; Fu, L.-L.; Li, W.-F.; Zhu, Y.-R. Effect of Dietary Supplementation with Bacillus subtilis on the Growth, Performance, Immune Response and Antioxidant Activities of the Shrimp ( Litopenaeus vannamei ): B. subtilis Affect Growth of L. vannamei . Aquac. Res. 2010 , 41 , 1691–1698. [ Google Scholar ] [ CrossRef ]
• Ghosh, S.; Sinha, A.; Sahu, C. Dietary Probiotic Supplementation in Growth and Health of Live-Bearing Ornamental Fishes. Aquac. Nutr. 2008 , 14 , 289–299. [ Google Scholar ] [ CrossRef ]
• Reinecke, M.; Björnsson, B.T.; Dickhoff, W.W.; McCormick, S.D.; Navarro, I.; Power, D.M.; Gutiérrez, J. Growth Hormone and Insulin-like Growth Factors in Fish: Where We Are and Where to Go. Gen. Comp. Endocrinol. 2005 , 142 , 20–24. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Midhun, S.J.; Arun, D.; Neethu, S.; Vysakh, A.; Radhakrishnan, E.K.; Jyothis, M. Administration of Probiotic Paenibacillus polymyxa HGA4C Induces Morphometric, Enzymatic and Gene Expression Changes in Oreochromis niloticus . Aquaculture 2019 , 508 , 52–59. [ Google Scholar ] [ CrossRef ]
• Qin, Q.; Cao, X.-F.; Dai, Y.; Wang, L.-N.; Zhang, D.-D.; Jiang, G.-Z.; Liu, W.-B. Effects of Dietary Protein Level on Growth Performance, Digestive Enzyme Activity, and Gene Expressions of the TOR Signaling Pathway in Fingerling Pelteobagrus fulvidraco . Fish Physiol. Biochem. 2019 , 45 , 1747–1757. [ Google Scholar ] [ CrossRef ]
• Wu, M.; Lu, S.; Wu, X.; Jiang, S.; Luo, Y.; Yao, W.; Jin, Z. Effects of Dietary Amino Acid Patterns on Growth, Feed Utilization and Hepatic IGF-I, TOR Gene Expression Levels of Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂) Juveniles. Aquaculture 2017 , 468 , 508–514. [ Google Scholar ] [ CrossRef ]
• Jose, M.S.; Arun, D.; Neethu, S.; Radhakrishnan, E.K.; Jyothis, M. Probiotic Paenibacillus polymyxa HGA4C and Bacillus licheniformis HGA8B Combination Improved Growth Performance, Enzymatic Profile, Gene Expression and Disease Resistance in Oreochromis niloticus . Microb. Pathog. 2023 , 174 , 105951. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Heshmatfar, F.; Safari, R.; Shabani, A.; Hoseinifar, S.H.; Ghaffari, H.; Shokohian, B.; Ullah, M.R.; Siddik, M.A.B. The Effects of Combined or Singular Administration of Formic Acid and Pediococcus acidilactici on Stress Resistance, Growth Performance, Immune Responses and Related Genes Expression in Common Carp, Cyprinus carpio . Aquac. Rep. 2023 , 29 , 101474. [ Google Scholar ] [ CrossRef ]
• Li, H.; Tian, X.; Zhao, K.; Jiang, W.; Dong, S. Effect of Clostridium butyricum in Different Forms on Growth Performance, Disease Resistance, Expression of Genes Involved in Immune Responses and mTOR Signaling Pathway of Litopenaeus vannamai . Fish Shellfish. Immunol. 2019 , 87 , 13–21. [ Google Scholar ] [ CrossRef ]
• Liang, H.; Ren, M.; Habte-Tsion, H.-M.; Ge, X.; Xie, J.; Mi, H.; Xi, B.; Miao, L.; Liu, B.; Zhou, Q.; et al. Dietary Arginine Affects Growth Performance, Plasma Amino Acid Contents and Gene Expressions of the TOR Signaling Pathway in Juvenile Blunt Snout Bream, Megalobrama amblycephala . Aquaculture 2016 , 461 , 1–8. [ Google Scholar ] [ CrossRef ]
• Irm, M.; Taj, S.; Jin, M.; Luo, J.; Andriamialinirina, H.J.T.; Zhou, Q. Effects of Replacement of Fish Meal by Poultry By-Product Meal on Growth Performance and Gene Expression Involved in Protein Metabolism for Juvenile Black Sea Bream ( Acanthoparus schlegelii ). Aquaculture 2020 , 528 , 735544. [ Google Scholar ] [ CrossRef ]
• Kuebutornye, F.K.A.; Abarike, E.D.; Lu, Y. A Review on the Application of Bacillus as Probiotics in Aquaculture. Fish Shellfish. Immunol. 2019 , 87 , 820–828. [ Google Scholar ] [ CrossRef ]
• Zhang, M.-Q.; Yang, J.-L.; Lai, X.-X.; Li, W.; Zhan, M.-J.; Zhang, C.-P.; Jiang, J.-Z.; Shu, H. Effects of Integrated Multi-Trophic Aquaculture on Microbial Communities, Antibiotic Resistance Genes, and Cultured Species: A Case Study of Four Mariculture Systems. Aquaculture 2022 , 557 , 738322. [ Google Scholar ] [ CrossRef ]
• Cao, H.; Yu, R.; Zhang, Y.; Hu, B.; Jian, S.; Wen, C.; Kajbaf, K.; Kumar, V.; Yang, G. Effects of Dietary Supplementation with β-Glucan and Bacillus subtilis on Growth, Fillet Quality, Immune Capacity, and Antioxidant Status of Pengze Crucian Carp ( Carassius auratus var. Pengze). Aquaculture 2019 , 508 , 106–112. [ Google Scholar ] [ CrossRef ]
• Linh, N.V.; Lubis, A.R.; Dinh-Hung, N.; Wannavijit, S.; Montha, N.; Fontana, C.M.; Lengkidworraphiphat, P.; Srinual, O.; Jung, W.-K.; Paolucci, M.; et al. Effects of Shrimp Shell-Derived Chitosan on Growth, Immunity, Intestinal Morphology, and Gene Expression of Nile Tilapia ( Oreochromis niloticus ) Reared in a Biofloc System. Mar. Drugs 2024 , 22 , 150. [ Google Scholar ] [ CrossRef ]
• Pirarat, N.; Pinpimai, K.; Endo, M.; Katagiri, T.; Ponpornpisit, A.; Chansue, N.; Maita, M. Modulation of Intestinal Morphology and Immunity in Nile Tilapia ( Oreochromis niloticus ) by Lactobacillus rhamnosus GG. Res. Vet. Sci. 2011 , 91 , e92–e97. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Merrifield, D.L.; Harper, G.M.; Dimitroglou, A.; Ringø, E.; Davies, S.J. Possible Influence of Probiotic Adhesion to Intestinal Mucosa on the Activity and Morphology of Rainbow Trout ( Oncorhynchus mykiss ) Enterocytes. Aquac. Res. 2009 , 41 , 1268–1272. [ Google Scholar ] [ CrossRef ]
• Akhter, N.; Wu, B.; Memon, A.M.; Mohsin, M. Probiotics and Prebiotics Associated with Aquaculture: A Review. Fish Shellfish. Immunol. 2015 , 45 , 733–741. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Xing, Q.; Liao, H.; Xun, X.; Wang, J.; Zhang, Z.; Yang, Z.; Huang, X.; Bao, Z. Genome-Wide Identification, Characterization and Expression Analyses of TLRs in Yesso Scallop ( Patinopecten yessoensis ) Provide Insight into the Disparity of Responses to Acidifying Exposure in Bivalves. Fish Shellfish. Immunol. 2017 , 68 , 280–288. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Xu, S.; Wang, Q.; Wang, F.; Li, X.; Wang, B.; Zhou, Y.; Zou, P.; Tang, L.; Yu, D.; Li, W. Improved Immune Function of Chinese Soft-Shelled Turtles ( Pelodiscus sinensis ) through Oral Probiotics via the TLR Signaling Pathway. Aquaculture 2022 , 555 , 738126. [ Google Scholar ] [ CrossRef ]
• Gu, Y.; Chen, K.; Xi, B.; Xie, J.; Bing, X. Paeonol Increases the Antioxidant and Anti-Inflammatory Capacity of Gibel Carp ( Carassius auratus gibelio ) Challenged with Aeromonas Hydrophila. Fish Shellfish. Immunol. 2022 , 123 , 479–488. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Li, M.-Y.; Guo, W.-Q.; Guo, G.-L.; Zhu, X.-M.; Niu, X.-T.; Shan, X.-F.; Tian, J.-X.; Wang, G.-Q.; Zhang, D.-M. Effects of Dietary Astaxanthin on Lipopolysaccharide-Induced Oxidative Stress, Immune Responses and Glucocorticoid Receptor (GR)-Related Gene Expression in Channa argus . Aquaculture 2020 , 517 , 734816. [ Google Scholar ] [ CrossRef ]
• Xue, M.; Wu, Y.; Hong, Y.; Meng, Y.; Xu, C.; Jiang, N.; Li, Y.; Liu, W.; Fan, Y.; Zhou, Y. Effects of Dietary Bacillus amyloliquefaciens on the Growth, Immune Responses, Intestinal Microbiota Composition and Disease Resistance of Yellow Catfish, Pelteobagrus fulvidraco . Front. Cell. Infect. Microbiol. 2022 , 12 , 1047351. [ Google Scholar ] [ CrossRef ]
• Zhao, Z.; Wang, H.; Zhang, D.; Guan, Y.; Siddiqui, S.A.; Feng-Shan, X.; Cong, B. Oral Vaccination with Recombinant Lactobacillus casei Expressing Aeromonas hydrophila Aha1 against A. Hydrophila Infections in Common Carps. Virulence 2022 , 13 , 794–807. [ Google Scholar ] [ CrossRef ]
• Kuebutornye, F.K.A.; Tang, J.; Cai, J.; Yu, H.; Wang, Z.; Abarike, E.D.; Lu, Y.; Li, Y.; Afriyie, G. In Vivo Assessment of the Probiotic Potentials of Three Host-Associated Bacillus Species on Growth Performance, Health Status and Disease Resistance of Oreochromis niloticus against Streptococcus agalactiae . Aquaculture 2020 , 527 , 735440. [ Google Scholar ] [ CrossRef ]
• Yang, G.; Cao, H.; Jiang, W.; Hu, B.; Jian, S.; Wen, C.; Kajbaf, K.; Kumar, V.; Tao, Z.; Peng, M. Dietary Supplementation of Bacillus cereus as Probiotics in Pengze Crucian Carp ( Carassius auratus var. Pengze): Effects on Growth Performance, Fillet Quality, Serum Biochemical Parameters and Intestinal Histology. Aquac. Res. 2019 , 50 , 2207–2217. [ Google Scholar ] [ CrossRef ]
• Yang, G.; Shen, K.; Yu, R.; Wu, Q.; Yan, Q.; Chen, W.; Ding, L.; Kumar, V.; Wen, C.; Peng, M. Probiotic ( Bacillus cereus ) Enhanced Growth of Pengze Crucian Carp Concurrent with Modulating the Antioxidant Defense Response and Exerting Beneficial Impacts on Inflammatory Response via Nrf2 Activation. Aquaculture 2020 , 529 , 735691. [ Google Scholar ] [ CrossRef ]
• Giri, S.S.; Sen, S.S.; Chi, C.; Kim, H.J.; Yun, S.; Park, S.C.; Sukumaran, V. Effect of Guava Leaves on the Growth Performance and Cytokine Gene Expression of Labeo rohita and Its Susceptibility to Aeromonas hydrophila Infection. Fish Shellfish. Immunol. 2015 , 46 , 217–224. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Amalina, N.Z.; Dzarifah, Z.; Amal, M.N.A.; Yusof, M.T.; Zamri-Saad, M.; Al-saari, N.; Tanaka, M.; Mino, S.; Sawabe, T.; Ina-Salwany, M.Y. Recent Update on the Prevalence of Vibrio Species among Cultured Grouper in Peninsular Malaysia. Aquac. Res. 2019 , 50 , 3202–3210. [ Google Scholar ] [ CrossRef ]
• Amoah, K.; Tan, B.; Zhang, S.; Chi, S.; Yang, Q.; Liu, H.; Yang, Y.; Zhang, H.; Dong, X. Host Gut-Derived Bacillus Probiotics Supplementation Improves Growth Performance, Serum and Liver Immunity, Gut Health, and Resistive Capacity against Vibrio harveyi Infection in Hybrid Grouper (♀ Epinephelus fuscoguttatus × ♂ Epinephelus lanceolatus ). Anim. Nutr. 2023 , 14 , 163–184. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Tan, H.Y.; Chen, S.-W.; Hu, S.-Y. Improvements in the Growth Performance, Immunity, Disease Resistance, and Gut Microbiota by the Probiotic Rummeliibacillus stabekisii in Nile Tilapia ( Oreochromis niloticus ). Fish Shellfish. Immunol. 2019 , 92 , 265–275. [ Google Scholar ] [ CrossRef ]
• Zhang, X.; Xu, X.; Shen, Y.; Fang, Y.; Zhang, J.; Bai, Y.; Gu, S.; Wang, R.; Chen, T.; Li, J. Myeloid Differentiation Factor 88 ( Myd88 ) Is Involved in the Innate Immunity of Black Carp ( Mylopharyngodon piceus ) Defense against Pathogen Infection. Fish Shellfish. Immunol. 2019 , 94 , 220–229. [ Google Scholar ] [ CrossRef ]
• Yu, Z.; Zhao, L.; Zhao, J.-L.; Xu, W.; Guo, Z.; Zhang, A.-Z.; Li, M.-Y. Dietary Taraxacum Mongolicum Polysaccharide Ameliorates the Growth, Immune Response, and Antioxidant Status in Association with NF-κB , Nrf2 and TOR in Jian Carp ( Cyprinus carpio Var. Jian). Aquaculture 2022 , 547 , 737522. [ Google Scholar ] [ CrossRef ]
• Tian, J.; Han, G.; Li, Y.; Zhao, L.; Wang, G. Effects of Resveratrol on Growth, Antioxidative Status and Immune Response of Snakehead Fish ( Channa argus ). Aquac. Nutr. 2021 , 27 , 1472–1481. [ Google Scholar ] [ CrossRef ]
• Yin, H.; Deng, Y.; Liang, C.; Geng, L.; Zhang, J.; Wu, X.; Zhou, Z.; Zhai, H.; Cai, Q.; Zhang, L.; et al. Effects of Feeding Regimes and Dietary Energy on the Production Performance, Plasma Immune Parameters and Expression of Genes Involved in the TOR / S6K1 Pathway of Juvenile Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂). Aquaculture 2023 , 571 , 739457. [ Google Scholar ] [ CrossRef ]
• Sun, Z.; Tan, X.; Ye, H.; Zou, C.; Ye, C.; Wang, A. Effects of Dietary Panax Notoginseng Extract on Growth Performance, Fish Composition, Immune Responses, Intestinal Histology and Immune Related Genes Expression of Hybrid Grouper ( Epinephelus lanceolatus ♂ × Epinephelus fuscoguttatus ♀) Fed High Lipid Diets. Fish Shellfish. Immunol. 2018 , 73 , 234–244. [ Google Scholar ] [ CrossRef ]
• Yang, J.; Lu, X.-J.; Chai, F.-C.; Chen, J. Molecular Characterization and Functional Analysis of a Piscidin Gene in Large Yellow Croaker ( Larimichthys crocea ). Zool. Res. 2016 , 37 , 347–355. [ Google Scholar ] [ CrossRef ]
• Yang, H.-L.; Sun, Y.-Z.; Hu, X.; Ye, J.; Lu, K.-L.; Hu, L.-H.; Zhang, J.-J. Bacillus Pumilus SE5 Originated PG and LTA Tuned the Intestinal TLRs/MyD88 Signaling and Microbiota in Grouper (Epinephelus Coioides). Fish Shellfish. Immunol. 2019 , 88 , 266–271. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Tan, X.; Sun, Z.; Liu, Q.; Ye, H.; Zou, C.; Ye, C.; Wang, A.; Lin, H. Effects of Dietary Ginkgo Biloba Leaf Extract on Growth Performance, Plasma Biochemical Parameters, Fish Composition, Immune Responses, Liver Histology, and Immune and Apoptosis-Related Genes Expression of Hybrid Grouper ( Epinephelus Lanceolatus ♂ × Epinephelus Fuscoguttatus ♀) Fed High Lipid Diets. Fish Shellfish. Immunol. 2018 , 72 , 399–409. [ Google Scholar ] [ CrossRef ]
• Zhou, Z.; Wang, X.; Wu, X.; Gao, Y.; Li, X.; Dong, Y.; Yao, W. Effects of Dietary Leucine Levels on Growth, Feed Utilization, Neuro-Endocrine Growth Axis and TOR-Related Signaling Genes Expression of Juvenile Hybrid Grouper (Epinephelus Fuscoguttatus ♀ × Epinephelus Lanceolatus ♂). Aquaculture 2019 , 504 , 172–181. [ Google Scholar ] [ CrossRef ]
• Xia, Y.-T.; Wu, Q.-Y.; Hok-Chi Cheng, E.; Ting-Xia Dong, T.; Qin, Q.-W.; Wang, W.-X.; Wah-Keung Tsim, K. The Inclusion of Extract from Aerial Part of Scutellaria baicalensis in Feeding of Pearl Gentian Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceo-latus ♂) Promotes Growth and Immunity. Fish Shellfish. Immunol. 2022 , 127 , 521–529. [ Google Scholar ] [ CrossRef ]
• Luo, S.-W.; Cai, L.; Qi, Z.-H.; Wang, C.; Liu, Y.; Wang, W.-N. Effects of a Recombinant Complement Component C3b Functional Fragment α2MR (α2-macroglobulin receptor) Additive on the Immune Response of Juvenile Orange-Spotted Grouper ( Epinephelus coioides ) after the Exposure to Cold Shock Challenge. Fish Shellfish. Immunol. 2015 , 45 , 346–356. [ Google Scholar ] [ CrossRef ]
• Lin, K.; Zhu, Z.; Ge, H.; Zheng, L.; Huang, Z.; Wu, S. Immunity to Nervous Necrosis Virus Infections of Orange-Spotted Grouper ( Epinephelus coioides ) by Vaccination with Virus-like Particles. Fish Shellfish. Immunol. 2016 , 56 , 136–143. [ Google Scholar ] [ CrossRef ]

Click here to enlarge figure

Share and Cite

Zhang, M.; Feng, Y.; Zhong, Z.; Du, Q.; Yu, W.; Wu, J.; Huang, X.; Huang, Z.; Xie, G.; Shu, H. Host Gut-Derived Probiotic, Exiguobacterium acetylicum G1-33, Improves Growth, Immunity, and Resistance to Vibrio harveyi in Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂). Microorganisms 2024 , 12 , 1688. https://doi.org/10.3390/microorganisms12081688

Zhang M, Feng Y, Zhong Z, Du Q, Yu W, Wu J, Huang X, Huang Z, Xie G, Shu H. Host Gut-Derived Probiotic, Exiguobacterium acetylicum G1-33, Improves Growth, Immunity, and Resistance to Vibrio harveyi in Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂). Microorganisms . 2024; 12(8):1688. https://doi.org/10.3390/microorganisms12081688

Zhang, Mingqing, Yuwei Feng, Zhongxuan Zhong, Qianping Du, Wei Yu, Jinhui Wu, Xiaolin Huang, Zhong Huang, Guangting Xie, and Hu Shu. 2024. "Host Gut-Derived Probiotic, Exiguobacterium acetylicum G1-33, Improves Growth, Immunity, and Resistance to Vibrio harveyi in Hybrid Grouper ( Epinephelus fuscoguttatus ♀ × Epinephelus lanceolatus ♂)" Microorganisms 12, no. 8: 1688. https://doi.org/10.3390/microorganisms12081688

Article Metrics

Supplementary material.

ZIP-Document (ZIP, 757 KiB)

Further Information

Mdpi initiatives, follow mdpi.

Subscribe to receive issue release notifications and newsletters from MDPI journals

Perseverance Pays Off for Student Challenge Winners

As radioisotopes power the Perseverance rover to explore Mars, perseverance “powered” three winners to write essays each year till they achieved their mission goal of winning NASA’s Power to Explore Challenge . These students explored behind the scenes at NASA's Glenn Research Center and Great Lakes Science Center (GLSC) in Cleveland after writing the top essays in the national contest.

The competition for kindergarten through 12th grade students focuses on the enabling power of radioisotopes. Students were challenged to learn how NASA has powered some of its most famous science missions and to dream up how their personal “superpower” would energize their own radioisotope-powered science mission.

Judges narrowed down over a seventeen hundred creative essays to 45 semi-finalists, who received prize packs, nine finalists, who participated in a videoconference with NASA experts, and three winners, who were awarded with a visit to NASA Glenn.

“I’m so impressed by the work of these talented young students. It’s wonderful to see their interest, innovation, and creativity at this stage in their lives. Our future is bright!

Dr. Wanda Peters

Acting Deputy Director, NASA's Glenn Research Center

“I’m so impressed by the work of these talented young students,” said Dr. Wanda Peters, acting deputy center director at NASA Glenn. “It’s wonderful to see their interest, innovation, and creativity at this stage in their lives. Our future is bright!”

Rainie Lin , the kindergarten through fourth grade winner; Aadya Karthik , the fifth through eighth grade winner, and Thomas Liu , the ninth through 12th grade winner, toured several research facilities including the Electric Propulsion and Power Laboratory , Telescience Support Center , Graphics and Visualization Lab , and Simulated Lunar Operations Lab . Along the way, they met with engineers and researchers to learn about NASA’s missions and the technologies that are innovating exploration.

The next day students and their families traveled to GLSC, which houses NASA Glenn’s Visitor Center. Accompanied by members of NASA’s Radioisotope Power Systems (RPS) team, the group toured the visitor center and explored the many interactive displays.

“It was our pleasure to host the three student winners of The Power to Explore Challenge, and I hope that this visit will further inspire and motivate them to pursue their interests in science and exploration,” said Carl Sandifer, manager for NASA’s RPS Program. "We are so impressed by the ideas and quality of the essays submitted this year and we can’t wait to what new ideas student come up with for next year’s challenge!”

The Power to Explore Challenge asked students to learn about the RPS, one of NASA’s “nuclear batteries” it uses to explore some of the most extreme destinations in our solar system and beyond. Students then wrote about their own power to achieve goals in 250 words or less.

NASA will hold its fourth-annual Power to Explore Challenge later this fall. For more information on the challenge visit: The Power to Explore Writing Challenge homepage .

ABOUT THE CHALLENGE:

Power to Explore is a national essay challenge that asks students in grades K-12 to learn about Radioisotope Power Systems (RPS), a type of “nuclear battery” that NASA uses to explore some of the most extreme destinations in our solar system and beyond, and then write about, in 250 words or less, an RPS-powered space mission that would energize their space exploration dreams.

ABOUT FUTURE ENGINEERS:

Future Engineers hosts online contests and challenges for K-12 students. Previous challenges have helped produce historic achievements – from naming NASA’s Perseverance rover to manufacturing the first student-designed 3D print in space. All challenges are offered free for student and classroom participation. For more information, visit futureengineers.org . Follow Future Engineers on Twitter , Facebook , and Instagram .

Media Contact: Kristin Jansen Public Affairs Specialist Office of Communications NASA RPS Program Phone: 216-296-2203 Email: [email protected]

Discover More Topics From NASA

Radioisotope Power Systems

About Plutonium-238

Radioisotope Power Systems Missions

Radioisotope Power Systems Safety and Reliability